WBPWD/AE/KMCESD/NIQ-112/24-25

Amount

A. Distribution wiring:---

Dismantling the existing E.I. work by Co's own tools & tackles and remove unnecessary,scrap items away from site by maintening normalcy as far as possible and deposit necessary materials to section office as per direction of EIC .

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] vide pg no E-15 item no. 5

avg run 10 mtr

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. vide pg no E-14 item no. 1a

3 X 1.5 sqmm

2 X 2.5 sqmm + 1 X 1.5 sqmm

2 X 4 sqmm + 1 x 2.5 sqmm

2 X 6 sqmm + 1 X 4 sqmm

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. (P/No., E-3. I/No. 6 (a)

19 mm dia 3 mm thick polythene pipe without earth continuity wire

25 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. vide pg no E-9 item no. 1

3 X 1.5 sqmm

2 X 2.5 sqmm + 1 X 1.5 sqmm

2 X 6 sqmm + 1 X 4 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. vide pg no F-5 item no. 9

B. BDB, PDB etc:---

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make-Legrand/L&T/Schneider/ABB/Siemens) 2+12way Vide page no D-9 item no 13

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/L&T/Schneider/ABB/Siemens) as to GS. 6 way, Vide page no D-11 item no 14

Supplying and fixing 240/415 V MCB on din rail of existing DBs and necessary connection.(Make-Legrand/L&T/Schneider/ABB/Siemens) Vide page no D-5 item no 6

i. 415 V ,63 A FP MCB for PBDB

ii. 240 V, 40A DP MCB for LBDB

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make-Legrand/L&T/Schneider/ABB/Siemens) Vide page no D-6 item no 7

ii. 6A - 32A SP MCB for PBDB & LBDB

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. (Make-Legrand/L&T/Schneider/ABB/Siemens) Vide page no D-12 item no 16

4 way HTPNDB

C. Plug & Sockets:---

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick as per GS.(on board) vide pg no E-15 item no. 4

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Make-Anchor penta/ Havell's Reo) on sheet metal switch board embedded in wall incl. S& F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required as to GS. (Vide page no E 7 Item no 26 )

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Make-Anchor penta/ Havell's Reo) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. vide page no E-6 item no 22

S & F 240 V, 6 A plug socket 2 nos with separate 6 A piano key type switch 2 nos (Make-Anchor penta/ Havell's Reo) on sheet metal switch board embedded in wall incl. S & F 175 x 100 x 65 mm MS (16) SWG switch board and bakelite /perspex top cover of 3 mm thick by brass screws after making housing for switch by cutting bakelite /perspex cover and making necessary connection as required .

D. Supply of cables :---

Supplying and Delivery of 1.1 KV Gr. following sizes Al. armoured XLPE insulated cable (make-- Havells/Gloster/KEI/Polycab/RR kable) as mentioned below :

4 core 35 sqmm (from VTPNDB to PDBs)

2 core 10 sq mm (from Minto block to Quarter)

E. Laying of cables :---

Laying of 2core 10 sqmm Al. armoured PVC/XLPE cable with 1X10 SWG GI wire making hole etc. as necy., mending good damages and painting as mentioned below : (from VTPNDB to PDB). Vide page no F-1 Item no 2 & 4 and F-3 item no 5.)

on wall by MS/GI saddles

Concealed in wall

Laying of 2core 10 sqmm Al. armoured PVC/XLPE cable with 6 SWG GI stay wire, 14 SWG GI binding wire incl S&F GI angle 50 X 50 X 5 mm, 300mm long 2 nos engraved in wall.

Laying of 4 core 35 sqmm Al. armoured PVC/XLPE cable with 2X10 SWG GI wire making hole etc. as necy., mending good damages and painting as mentioned below : (from VTPNDB to PDB). Vide page no F-1,F-3 Item no 2 & 5,6)

on wall by clamp

Concealed in wall

Laying of 4 core 35 sqmm Al. armoured PVC/XLPE cable with 6 SWG GI stay wire, 14 SWG GI binding wire incl S&F GI angle 50 X 50 X 5 mm, 300mm long 2 nos engraved in wall.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (vide pg no F-4 item no. 7.C)

4 core 35 sqmm

2 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (vide pg no F-5 item no. 8a & 9)

4 core 35 sqmm

2 core 10 sqmm

F: Supply of Light fittings:-

S/D 4feet single commercial LED type fluroscent light fittings (make-- Philips TMC 502 1xT-LED 22W/ CG Eco-I IGP161LT8-16 1XT8/Wipro WIO921208P/Bajaj BLRB-DB-118/Havells Regal Batten) complete with all accessories with 1X18/20 Wt LED tube lamp corresponding to(Make- Philips MAS LED Tube 1200mm 18W 865 T8 I, 2100lm/ Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/Bajaj BLRB 20W CW LED/Havells Titania Neo)

S/D 4feet twin commercial LED type fluroscent light fittings (make-- Philips TMC 502 2xT-LED 22W/ CG Eco-I IGP161LT8-16 2XT8/ Wipro WIO922208P/Havells Regal Batten) complete with all accessories with 2X18/20 Wt (Make-Crompton LT8-20-865-(2) ULTRON/ Bajaj BLRB-DB-118) LED tube lamp corresponding to (Make- Philips MAS LED Tube 1200mm 18W 865 T8 I, 2100lm / Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/ Bajaj BLRB 20W CW LED/Havells Titania Neo)

S & D 9 watt LED lamp B22 cap (Philips/Crompton/wipro)

G. Fixing of Light Fittings :---

Fixing only single/twin fluorescent light fittings suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp (125mmx125mm) x 6mm thick as per G S Vide page no C-2, Item no 17

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length as per G S Vide page no C2 Item no 16

Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener / MS clamp 6mm thick. Vide page no C2 Item no 14(b)

Fixing 9 watt LED lamp on batten holder.

H. Supply of fans :---

S & D 230V,1200mm sweep ceiling fan, air delivery 230 CMH, (make-- Usha Striker 1 star/CG Hi speed (HS) 1 star/Orient Falcon-425 SHS) complete with blades, canopy, fork, rubber bush, down rod, 1000mm safety wire & S3 capacitor etc.

S & D 230V, 1400 RPM heavy duty exhaust fan (Make -- EPC/ USHA,S.Ph TURBO Heavy duty,1400RPM,ISI Grey/ Orient Heavy duty/CG EXHD300-4-1) of following sizes 12" (300mm)

I: Fixing of fans :---

fixing only 12" (30 cm) exhaust fan of following sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia incl. Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS. Vide page no C-4, Item no 28

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. page no C-3, Item no 21a

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire.

Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting Vide page no D 14 Item no 29

S & F socket type Electronic fan regulator(230V,100W, step type ) (Make-Anchor penta/ Havell's Reo)

Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop. Vide page no C-3, Item no 24.a.

Extra for additional one letter incl. Hifen, stroke and stop as per GS. Vide page no C-3, Item no 24.b

Painting upto 10 letters of the engraved number with approved black /red paint as required. vide page no C-3, Item no 26.a.

Extra painting for additional one letter of the engraved number with hifen, stroke etc. with black or red paint. Vide page no C-3, Item no 26.b.

S & F additional safety arrangement of ceiling fan by stranded GI stay safety wire of suitable gauge with one end fixed at RC fan clamp with special type socket/nut bolts thimble which throughly crimped with the stay wire and the wire passing through the down rod and the other end connected with armature spindle by its existing jum nut hole with 2 nos special jublee clamp arrangement (sample approved by AE & Concerned JE, PWD).The length of stay wire varies as per site situation & it is also considering any type of work required i.e enlarging the existing hole / making hole in down rod by special arrangement and also making arrangement by insulating & socketing two ends of stay safety wire etc to complete the job as per direction of EIC. S&F of new split pin, jum nut, blade screw, nut bolt & washer heavy duty etc. down length 4' to 8'.

J. Miscellaneous :---

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. Vide page no D-13, Item no 20.a.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. Vide page no D 13 Item no 22

S&D of 1X18/20 Wt LED tube lamp corresponding to(Make- Philips MAS LED Tube 1200mm 18W 865 T8 I, 2100lm/ Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/Bajaj BLRB 20W CW LED/Havells Titania Neo)

Special Terms and Conditions 1. It is stated that the above work place is existing COVID Hospital, In case of any mishap or accidental to any staff that deputed by the agency the whole responsibility is to be borne by the concern agency. 2. The Agency shall be responsible for provisioning of all COVID safety measures including regular sanitiziation of work places, vaccination of employees and compliance of stated directive and COVID appropriate norms. 3. All the issues related to the safety of the staffs should be taken care by the agency itself. (Defect Libilities period for 01 year from the date of completion of work) (Rate should be quotated including all taxes and duties)

M/S R. K. ENTERPRISE (BID ID -5844532)

MAA TARA ENTERPRISE (BID ID -5920446)