Repairing, Maintenance and Misc items in Resi No. M-1/7 and M-1/8 in Canal Colony Cantt Road, Lucknow (Lot-42)

Amount

12mm cement plaster in sigle coat in single storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc including the Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge with in distance of 60m.

Scraping old white or colour wash including disposal of refuse as directed by Engineer- in- charge with in a distance of 60m.

Providing and applying plaster of putty 2mm thickness over plasterd surface to prepare the surface even and smooth complete.

One priming coat and two coat oil bound distemper including supply of all materials, labour and T&P etc.required for proper completion of work.

Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials ,labour, T&P etc required for proper completion of work .(Paint to be used should conform to the ISI no -103-1950.)

Fly proof Stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide apreture with matching wood beading

Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm PVC P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing Panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws. Excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note. Butt hinges and necessary screws shall be paid separately)

Providing and placing on terrace (at all floor levels) polyethylene water strorege tank ISI:12701 marked with over and suitable locking arrangement an macking necessary holes for inlet, out let and over flow pipes but with out fittings and the base support for tank. 500 lit Capacity tank

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a sigle 15 mm C.P.brass pillar taps

CHANDRA SEN