Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.8 LAccepted-AOC | L1 | Accepted-AOC The lowest bidder. | |
| 2 | L2₹11.0 L+₹19,550.40 (1.82%)Rejected-AOC | L2 | Rejected-AOC Other than the lowest bidder. | |
| 3 | L3₹11.4 L+₹59,879 (5.56%)Rejected-AOC | L3 | Rejected-AOC Other than the lowest bidder. | |
| 4 | Rejected-Technical | - | Rejected-Technical Not Admitted |
Tender Value
₹11.4 L
EMD Value
₹22,800
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Commander Works Engineers
Commander Works Engineers (Suburb) Military Engineer Services PO- Barrackpore, Dist - 24 Pgns (N) Kolkata - 700120 (W.B)
PROVN OF RAIN WATER HARVESTING WITH 6 PITS OF 3.6 M INTERNAL DIA AND 4.10M DEPTH BELOW GL PROVN OF SINGLE ACCN FOR JCOS AT 2 CBPO KOLKATA UNDER GE (N) KOLKATA
2023_MES_609652_2
CWE/(N) KOL/08 OF 2023-2024
Open Tender
Civil Works
Works
180 days
GE (N) Kolkata
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (N) Kolkata
₹22,800
Yes
7 Oct 2023
25 Aug 2023
11 Sept 2023
25 Aug 2023
9 Sept 2023
26 Aug 2023
Amount
Excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation etc and getting out in Soft/loose soil complete all as specified & directed.
Boring holes 200mm dia and 2m deep in soil and getting out and disposal of spoil to a distance of n exc. 50m and complete all as specified and directed.
S&F 150mm bore UPVC Pipes (SCH-80) laid and jointed including inverted earthen pots with holes complete all as specified and directed.
Material and labour for PCC (1:3:6 ) type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipe including packing under, and haunching against the sides of pipe after they are laid and tested complete all as specified & directed following 150 mm dia of pipes .
Excavating over areas, n exc 1.5m deep and getting out in soft/loose soil complete all as specified & directed.
Excavating over areas, exc 1.5m deep and getting out in soft/loose soil complete all as specified & directed.
Material and labour for providing cement concrete in foundations (1:4:8), type D2, (using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed
Material and labour for Brickwork with fly ash bricks, old size straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
Returning filling including spearding levelling watering and well ramming in layer n. exc. 25 cm in soft/loose soil copmplete all as specified & directed.
Removing excavated soil n.exc 50 mtr and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified .
M&L loose filling with stone aggregates of gauge 80 to 150mm in pit and complete all as specified and directed..
M&L loose filling with 12.5mm stone aggregates in pit and complete all as specified and directed..
M&L Sand filling and consolidation complete all as specified and directed.
M&L Reinforced cement concrete (nominal mix) (1:1.5:3), type A1 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likeall as specified and directed.
Material and Labour for precast RCC (1: 2:4), Type B-1 ( using 20 mm graded stone aggregate) as in manhole cover/drain cover and set in position with cement mortar (1:4) complete all as specified and as directed .
M&L Reinforced cement concrete (nominal mix) type A1 1:1.5:3 (20mm graded aggregate) as in lintel ,beams ,all as specified and directed.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
All as per Item No. 19 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
DEYS ENTERPRISE
R. D. Industrial
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .