Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.2 LAccepted-AOC 11 GURU NANAK MARKET AMBALA ROAD SAHARANPUR 247001 | SAHARANPUR | UTTAR PRADESH | 247001 | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹19.3 L+₹4.1 L (27.1%)Rejected-Finance | L2 | Rejected-Finance REJECTED NOT BEING LOWEST BIDDER |
Tender Value
₹13.8 L
EMD Value
₹27,850
Closing Date
28 Aug 2023, 6:00 pmClosed
CWE KHADKI
Headquarters CWE Khadki, Military Engineer Services, Range Hills Road, Khadki, Pune-411003
PROVISION OF AIR COMPRESSOR AND ASSOCIATED PIPELINE FOR A BLDG OF SUB ASSEMBLY RECLAMATION DEPARTMENT AT 512 ARMY BASE WKSP UNDER AGE E/M- II IN GE (CENTRAL) KHADKI
2023_MES_586865_4
CWE/KKE/T64 OF 2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
KHADKI
AS PER TENDER
6 documents required · 6 mandatory
₹500
Yes
GE CENTRAL KHADKI
₹27,850
Yes
23 Sept 2023
5 Aug 2023
31 Aug 2023
5 Aug 2023
28 Aug 2023
14 Aug 2023
Amount
S & F for Mild steel ERW pipe (IS:1239 part-I) heavy class including cutting, screwing, welding etc. Complete with forged steel / butt welded fittings viz. Tees, bends, elbows, flanges, reducers , clamps / hangers etc. Including cutting holes and chases in brick or rcc walls/slabs and making good the same complete including painting of pipes, fittings & steel work with one coat of primer and two coats of synthetic enamel paint of approved make and shade complete all as specified and directed.
100 mm dia ISI Marked
80 mm dia ISI Marked
25 mm dia ISI Marked
S & F 100mm bore hand operated butterfly valve ISI Marked of pressure not less than 15 Kg / Sqcm with complete set
S & F 80mm bore hand operated butterfly valve ISI Marked of pressure not less than 15 Kg / Sqcm with complete set
S & F 25mm bore hand operated butterfly valve ISI Marked of pressure not less than 15 Kg / Sqcm with complete set
S&F fabricated MS bracket /supports for MS and CI Pipe line, made out of angle iron and flat iron including bolts, nuts, washers and painting with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-in-charge.
Supply ,installation ,testing and commissioning of Air Compressor screw type of capacity 260 CFM at 10 Bar, Horizental Non lubricated, 2 Stage, cross head Air cooled heavy duty complete with Control Panel of suitable motor capacity , skid accessories and PCC work Complete all as specified and directed by Eng-in-Charge. Note-1. PCC foundation as per recommentation of manufacturer is included in unit rate.2. Rate of all T&P transport , crane etc included in unit rate
Supply , installation ,testing and commissioning of Air Compressor Receiver tank 2000 Ltr capacity, heavy duty complete with double safety valve and accessories, with thickness of wall 6 mm, with one incoming & outgoing gate valve of suitable dia (pressure rating 10 bar, working pressure) including pressure gauge vertical type, complete painted with synthetic enamel paint of approved colour code Complete all as specified and directed by Eng-in-Charge. Note-1. PCC foundation as per recommentation of manufacturer is included in unit rate.2 Rate of all T&P transport , crane etc icluded in unit rate
Supply, installation, testing and commissioning of Refrigerated air dryer unit of capacity 300 Cfm, heavy duty complete with Control Panel and accessories Complete all as specified and directed by Eng-in-Charge.
Supply , laying,testing and commissioning of XLPE insulated ,armoured heavy duty electric cable Aluminium conductor, 1100 volt cross sectional area 120 Sqmm 3.5 core incl thimble, end termination to the existing panel board Complete all as specified and directed by Eng-in-Charge.
M&L for earthing complete with galvanized steel earth plate Electrode 600mm x 600mm x 6mm thick buried directly in ground earth pit not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5mt below GL connected to 25 x 3mm GI streep upto 7.5 m long by mean of GI bolts ,nuts,check nuts & wasters and connected to earthing test point & earth dolly all as shown in electrical plate No 3 of SSR part I 2009 & as specified and testing on completion including earth work & excavation in any type of strata , PCC (1:3:6) type chamber precast slab 50mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric of XPM, weight not less than 4 Kg /Sqm) with cast iron frame ,funnel with water pipe of 20mm dia GI medium grade , wire mesh and lugs etc complete all as directed by engr-in-charge.
Om Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .