GE/863/EWS-T-15 OF 2025-26

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr in Charge.

M & L for rendering 12mm thick in CM (1:6) on brick work or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) using WPC 3% by weight of cement (WPC to be measured and paid separately) on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound of approved brand/make.

M&L for preparing New plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting on plastered surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, Pre painted galvatume aluminium Zinc Coating any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr in Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr in Charge.

S & f of mild steel roof trusses(framed),trussed,purlins,crane gantries,rails and fastening and heavy bracket framing (beam,tee ,angle,channel or flat sections) including distance pieces,cleats etc, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over one coat of primer on new or previously untreated steel surfaces exc 10 cm width or girth including preparation of surface complete all as specified and directed.

S & f roof plates with sleeves pieces riveted or welded thereto, and similar roof and ceiling connection complete all as specified and directed.

S & F for 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120 gm/sqm all as specified and directed.

S & F 0.63 mm thick Plain Galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) all as specified and directed.

S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed.

Prepainted galvanume aluminium zine coating GI based plain steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws complete all as specified and directed by Engr in Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed by Engr in Charge.

Dismantling of framed fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section complete all as specified and directed by Engr in Charge.

M&L 2nd class hard wood in scantling timber framed work fixed clean sawn all as specified and directed.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in ceiling etc.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, wall etc

Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.

Taking down Shutters of any description exc 2 sq. m each complete all as specified and directed by Engr in Charge.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and directed by Engr in Charge.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr in Charge.

S & F 35mm Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to Chowkat complete all as specified and directed by Engr-in-charge.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a)

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc as per clause no. 8.24 (b) of SSR 2009 Pt I

S & F Galvanized mild steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed by Engr in Charge.

Supply and Fix plain sheet glass/pin headded glass of 3 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as directed by Engineer-in-Charge.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion exc half brick but not exc one brick in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed .

M & L for Preparation surface of wood and wood based material, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each ditto complete all as specified and directed by Engr in Charge.

M & L For , treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, ditto complete all as specified and directed by Engr in Charge.

M & L for providing cement concrete Type C1 1:3:6 using 20mm graded stone aggregate as in Hold fast block complete all as specified and directed by Engr in Charge.

Supply and fixing mild steel works in bands, straps, supports, stays, bolts, hooks, hold fasts etc, similar articles conforming to Fe-290.Gde-E-165, complete all as specified and directed.

Supply & fixing Aluminium anodised, barrel tower bolt of 100mm long of extruded section and fixed complete all as specified and directed by Engr-in-charge.

Supply & fixing Aluminium anodised, barrel tower bolt of 75 mm long of extruded section and fixed complete all as specified and directed by Engr-in-charge.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of truded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-charge.

S & F 75 mm long extruded mild steel anodised Butt hinges with galvanized mild steel and fix complete all as specified and directed by Engr in Charge.

S & F 100 mm long extruded mild steel anodised Butt hinges with galvanized mild steel and fix complete all as specified and directed by Engr in Charge.

Supply & fixing Aluminium alloy handle of 125mm long fabricated type, anodised complete all as specified and directed by Engr-in-charge.

Supply & fixing Aluminium alloy handle of 75 mm long fabricated type, anodised complete all as specified and directed by Engr-in-charge.

Supply and fixing 2nd class hard wood small fittings, such as brackets of any type latch and hinge blocks, shaped door and window stops and the like including all necessary labours ,articles not exc 200 cu.cm each, complete all as specified and directed by Engr in Charge.

Supply and fixing 2nd class hard wood small fittings, such as brackets of any type latch and hinge blocks, shaped door and window stops and the like including all necessary labours ,articles exc 200 cu.cm but not exc 500 cu.cm each, complete all as specified and directed by Engr in Charge.

S & F in repair 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr in Charge.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed by Engr in Charge.

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

M & L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) over red oxide complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings including tiles not exc 15cm thick complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, including rough finished with out using extra cement complete all as specified and directed by Engr in Charge.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregateas in floor, including rough finished with out using extra cement complete all as specified and directed by Engr in Charge.

Material & labour for 50mm thick cement concrete type C1, 1:3:6 (using 20mm graded agg) as in plinth protection including providing necessary joints n. exc. 2.00 m in length & filled with bitumatic filling complete all as specified and directed.

M & L in repair 12mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in flat or sloping complete all as specifed and directed

M&L in repairs 18/19mm thick particle board, medium density, flat pressed single line layer type or three layer type with BWR type adhesive fixed with screws to timber frame including dismantling existing board complete all as specified and directed by Engr in Charge.

Dismantling of floor,hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified.

Demolition stone slabs and tiles laid bedded and pointed in any mortar, of any description or thickness in floors, aprons etc complete all as specified and directed by Engr in Charge.

M & L Granite (of any type) 18 to 20 mm thik work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick in (CM 1:6) complete all specified and directed

S&F in repair 19 mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers all as specified and as directed by Engr-in-charge.

S & F in repair for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but inclusive of fixing of supply, waste pipe 600 cm long & waste coupling PTMT 32mm dia & 15mm brass C.P. pillar tap) complete all as specified and directed.

S&F in repair bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.

S&F in repair Angle stop valve of PTMT any colour pressure screwed for iron pipe and fixed (15mm minimum weight 90 Gms) 15mm dia fixed to iron pipe complete all as specified and directed by Engr in Charge.

Supply & fixing in repair 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge..

S&F in repair for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed by Engr in Charge.

S&Fin repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr in Charge.

S&F in repair cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr in Charge.

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.

S&F in repair 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors complete all as specified and directed by Engr in Charge.

S & F in repair 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors complete all as specified and directed by Engr in Charge.

S & F in repair 75 mm dia bore PVC (SWR) bends any radius complete all as specified and directed by Engr in Charge.

S & F in repair 110 mm dia bore PVC (SWR) bends any radius complete all as specified and directed by Engr in Charge.

S & F in repair 110 mm dia bore PVC (SWR) junction single 'T' equal or unequalcomplete all as specified and directed by Engr in Charge.

S & F in repair PVC (SWR) 110 mm bore vent cowl complete all as specified and directed by Engr in Charge.

S&F in repair soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall complete all as specified and directed by Engr in Charge.

S&F in repair towel rail 600mm having cat part No ACN-CHR-11115M of Jaguar/equivelent complete all as specified and as directed

S&F in repair wall mixture 3 in 1 system having cat part No FLR-5281 (Floretine) of Jaguar/equivelent complete all as specified and directed

S&F in repair overhead shower single flow, 100mm dia (ABS CP) with shower arm of length 100mm having cat part No OHS-CHR-1989 of Jaguar /equivelent complete all as specifed and directed

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or offering credit as per schedule of credit all as directed.

All as per item above herein before but 20mm bore

S&F 3-layer PP-R Polypropylene random copolymer) of outer dia 20 mm ourter diaconcealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all specified and as directed

S&F 3-layer PP-R Polypropylene random copolymer) of outer dia 25 mm outer dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all specified and as directed

M & L for complete removal of existing treatment of old plastered surfaces of wall & preparation of wall and applying three coats of white wash complete all as specified and directed by Engr in Charge.

M & L for complete removal of existing treatment of old plastered surfaces, preparation of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of oil bound emulsion distemper complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

M & L for writing building Nos, letters or figures (Block,Roman, Italic or Indian) on wall n exc. 30 cm height with synthetic enamel paint complete all as specified and directed .

M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles/granite complete all as specified and directed .

M & L for Vitrified Ceramic tiles Light shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .

M & L for 100 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in surface of hardstanding laid in alternate bays finished even and smooth without using extra cement including spike rolling to surface or making impression of expanded metal, whilst the concrete is green complete all as specified and directed.

M & L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M & L for (100mm thick slab) forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 ,and finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on walls all as specified and directed.

Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified.

M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work, complete, all as specified and as directed.

S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion exc half brick but not exc one brick in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed .

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

S&F MS butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed.

S&F MS butt hinges cold rolled meium weight of size 75 mm etc complete all as specified & directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified

S&F 150mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-In-Charge.

Dismantling of stone slab and tiles of any description or thikness in floors ,apron etc complete all as specified and as directed.

M&L for machine cut kota stone slab flooring of size 550mmx550mmx 18 to 20 mm thick over cement screed bed 20 mm thick cement plaster 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr in Charge.

M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick including screed bed 20mm thick in (CM 1:4) , with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engr in Charge.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed .

Schedule of Credit

M/S JOHN VASSELLY (BID ID -3306099)

M/S Gopal Singh (BID ID -3300451)

chankaya solutions (BID ID -3301287)

SANTOSH KUMAR (BID ID -3300525)