BALANCE WORK for Construction of AYURVEDIC COLLEGE CUM HOSPITAL at AKHNOOR

Amount

Earthwork in all kinds of soil excavation by manual means over areas (Exceeding 30cm and upto 1.5 Mtr in depth, 1.5 M in width as well as 10 sqm on plan) including disposal of excavated earth upto 50 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed all kind of soils.incl backfilling with available exacavated soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregat/brick bat) 40mm nominal size crushed.

Providing and laying in position cement concrete of 1:3:6 grade (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level. And above

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in cement mortar 1:6 (1 cement : 6 fine sand). Foundation and plinth and super structure upto floor V level.

Half brick masonry with bricks of class designation 75 in foundation, plinth and superstructure upto floor V-level in cement mortar 1:4 (1 cement : 4 coarse sand).

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars.

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Foundations, footings, bases of columns.

Suspended floors, roofs, landings, balconies and access platforms.

Columns, pillars, piers, abutments, posts and struts.

Walls (any Thickness) I in foundation and above ncluding attached pilasters, buttresses, plinth and string courses etc.

Edges of slabs and breaks in floors and walls upto 20cm wide.

15mm cement plaster on the rough side of single or half brick wall of mix in 1:4(1 cement : 4 fine sand).

10mm cement plaster of mix 1:6 (1 cement : 6 fine sand).

Supply and laying of R.B.M/good earth in layer includind watering compacting complete including carriage complete

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) (M-20 Grade ) Foundation incl. carriage complete

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) (M-20 Grade ) incl. carriage complete

Providing and laying mat/glossy finished full-body vitrified premium quality floor tiles of 60x60cm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make of Somany, Kajaria, Rak make in colours and shade Ethnic-Berlinetta White, Crown White, Dacia White, Dacia Green, Dacia Pink, Dacia Ivory, Dacia Grey, Dacia Brown, Dacia Pearl, Dezzling White, Evalia, S&P Grey, S&P Brown, Ultra White, Haze Grey and Border of Royale- Crown Mint, Crown Pink, Crown Snow, Micra Brown and Radiant- Lawrence Gold, Lawrence Bianco, Lawrence Grigio, Lawernce Moka, Lawrence Jaisalmer, Nuvro Brown, Nuvaro Mocha, Nuvaro Grey, Nauvaro Nero, Nuvaro Crema, Nuvaro Bianco, Nuvaro Beige laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with matching Epoxy etc. complete.

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like Rak, SOMANY, KAJARIA or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skirting, risers of steps and dodos over 12mm thick bed of cement mortar 1:3 (1cement : 3coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ceramic glazed floor tiles (non-skidding) 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming to IS : 13755 of Rak, SOMANY, KAJARIA or equivalent make in colour such as white, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.

Providing and laying 16mm thick Granite of any colour and shape (area of slab upto 0.5 Sqm) gang saw cut flamed (pre moulded and pre polished), machine cut for stairs steps and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. (laboratory shelves)

Extra for providing opening of required size and shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble / stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone/brick bat aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work with one or two coat of cement primer

Finishing wall with premium acr)'lic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 litre/1 Osqm over and including base Coat of water proofing cement paint app-lied @ 2.20kg/1 Osqm)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic itemWith float glass panes of 5.50 mm thickness (weight not less than 13 .. 50 kg I sqm)

Providing and fixing 3mm thick ACP sheet (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion

For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (incudig Fittings such as Tower bolt 6" ,Tower bolt 10" ,Aral 12" , I hook , Tower bolt 10" , Aral 12" , I hook,D hande,long hancle,locks etc complete.

Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and sapling of girth upto 30cm measured at height of 1m above the ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer and synthetic enamel paint including welding and bolting with special shaped washers etc.complete. Hot finished seamless type tubes for eves boarding

Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charg 8.3.2 Granite Work

Providing and fitting of ms precoated strip 600mmX2mm to cover construction / expansion joint from in side \ outside complete

Steel work welded in built up sections frame work including cutting, hoisting, fixing in position and applying a primary coat of approved steel primer using structural steel etc as required in grating frames guard bar, ladder, railing, bracket gates and similar work

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement

Filling the gap in between aluminium frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 24.10.1 Upto 5mm depth and 5mm width

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and filling stone in concrete (plum) including cost os stone and carriage complete

Cutting holes upto 15x15 em in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work)

15mm dia. Nominal bore

20mm dia. Nominal bore

25mm dia. Nominal bore

Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. Made of G. I. wire of dia 4mm incl a coat of primer and two coat of synthetic enamel paint

Supplying at site Angle iron posts & struts .pf required size including bottom to be split and bent at'right angle in opposite direction for 10 em length and drilling holes upto 10 mm dia etc. with ms flat 40mm complete.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(make of Jaquar, Cera or equivalent).

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass Centre Hole Basin Mixer(01 Nos), 32 mm C.P. brass waste of standard pattern(01 Nos), Pedestal (01 Nos) including painting of fittings and brackets, cutting and making good the walls wherever required. Makes:-Jaquar/Hindware/Cera

Providing and fixing white vitreous china laboratory sink with C. I. brackets, C.P. brass chain with rubber plug 40mm C.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the walls wherever required :including angle valve and sink mixer complete600x450mm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing

Rectangular shape 453x357 mm

Providing and fixing C.P Brass Soap Dish. Makes:- Jaquar/Hindware/Cera

Providing and fixing health faucet with hose pipe for european water closet complete in all respect of approved quality Makes:- Jaquar/Hindware/Cera

Providing and fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws .Makes:- Jaquar/Hindware/Cera

Providing and fixing C.P brass bib cock with Auto closing System with Built in control Cock with Wall Flange of approved quality Makes:- Hindware/Jaquar/Cera

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser/cisterns points. Makes:- Hindware/Jaquar/Cera

15 mm nominal bore

Providing and fixing C.P. brass bottle trap for wash basin including CP waste fittings complete 32 mm dia complete in all respect of approved quality. Makes:-Jaquar/Hindware/Cera

Providing and fixing C.P. brass Wall Mixer Makes:- Hindware/Jaquar/Cera Ref: Hindware /Jaquar /Cera

Providing and fixing pvc Based soil, waste and vent pipes suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing.

110 mm dia. Pvc 6kg pressure socketed pipe with rubber ring joints .

75 mm dia. PP SWR socketed pipe with rubber ring joints .

Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required. Makes:- Astral/SFMC/Finolex

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo em,possed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot" and single piece M.S. sheet outer box with slide plate etc. complet~ as per the direction of Engineer-in charge

Providing and fixing of mosquito mesh in window/ door shutter complete

Madan Lal

Kewal Khajuria

Dev Raj Bhagat

AVG Contracts and Supplies pvt ltd