REPAIR /MAINT OF INTERNAL WIRING, LED LIGHT FITTINGS WITH OTHER ALLIED WORKS IN NP AND OFFICER ENCLAVE AT 24 ED UNDER AGE(I) AF MANAURI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose, pendants, regulators, sockets, lamp holders, light fittings etc removing old unserviceable material from site and serviceable material to site for keeping in safe custody and making good disturbed surfaces of wall, floor etc. all as directed.

Material and Labour for Point wiring with PVC insulated, unsheathed single core, nominal area 1.5 sqmm with multistranded copper conductor FRLS Cable 1100 volts grade drawn into and included rigid PVC conduit (concealed) with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sqmm unsheathed multistranded copper conductor FRLS Cables as earth wire connected to earth dolly incl metal junction box, grid plate and cover plate suitable for modular switches, sockets complete including making good the disturbed surfaces for the following:- Note : (i) Quoted rate shall be included cost of chasseing,cutting, concealing conduit, metal boxes, grid plate and cover plate, plastering and coloring etc to surface of wall / beam/ roof etc as site required matching with existed surface. (ii) Switches, sockets, etc shall be measured and paid for separately. (iii) Colour/ model of Modular accessories shall be approved by Engineer in Charge.

(a) One light point controlled by one way independent switch.

(b) One fan point controlled by one way independent switch.

(c) One bell point controlled by one way independent switch.

(d) One 3 pin 5 Amps socket out let point on same board controlled by one switch.

(e) One 3 pin 5 Amps socket out let point on independent board controlled by one switch.

(f) One light point for two way switch controlled by one switch.

(g) All as per above item No-2 here in before but power point wiring for 15 Amps socket outlet using 2.5 sqmm copper conductor cable FRLS insulated unsheathed for phase and neutral and 2.5 sqmm as earth wire complete.

(h) All as per above item No-2 here in before but power point wiring using 4 sqmm copper conductor cable FRLS insulated unsheathed and unsheathed copper conductor of 4 sqmm as earth wire complete.

Supply and fixing modular switch, flush, one way 6 Amps, single pole, 1 module

Supply and fixing modular switch, flush, one way 16 Amps, single pole, 1 module

Supply and fixing modular switch, two way 6 Amps 1 module

Supply and fixing modular bell push 6 Amps 1 module

Supply and fixing modular socket 6 A, 2/3 pin combined 2 module

Supply and fixing modular socket 16 A, 3/5 pin combined 2 module

Supply and fixing modular type power unit single phase 220 volts 32 Amps socket and control switch ISI marked 3 module complete

Supply and fixing bell ding dong type AC 230 volts single pole

Supply and fixing ceiling rose surface type 65 mm x 50 mm, 2 to 3 terminal.

Supply and fixing modular fan regulator step type 120W 2 module

Supply and fixing LED tube light fitting with frame, driver etc in 20 W 4 feet long white colour mounting on tow Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible conduit pipe from ceiling rose to fittings complete including taking down to old light fitting in all specification with connecting accessories as directed. Note:- (i) Make:- Bajaj cat No BCLSBAL 20W CW or equivalent model of make as specified in list of makes Appendix ‘B’ to Particular specifications. (ii) Light fitting of other make of higher capacity may be used without any price adjustment.

Supply and fixing LED tube light fitting with frame, driver etc in 10 W 2 feet long white colour mounting on tow Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible conduit pipe from ceiling rose to fittings complete including taking down to old light fitting in all specification with connecting accessories as directed. Note:- (i) Make:- Bajaj cat No BCLSB 10W NW or equivalent model of make as specified in list of makes Appendix ‘B’ to Particular specifications. (ii) Light fitting of other make of higher capacity may be used without any price adjustment.

Supply and fixing angular base plate type PVC holder with 10 W LED bulk head light fittings incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete including taking down to old light fitting in all specification with connecting accessories as directed. Note:- (i) Make:-Bajaj cat No BIBWP 10W LED or equivalent model of make as specified in list of makes Appendix ‘B’ to Particular specifications. (ii) Light fitting of other make of higher capacity may be used without any price adjustment.

Supply and fixing LED street/ Bldg security light fittings 30 watts energy saving incl making all electric connection using three core copper cable drawn through in PVC flexible conduit pipe from ceiling rose to fittings and mounting bracket made out by GI pipe light grade in 25 mm dia of bore in required length bend in 120 degree fixed with clamp made out by GI strip in size 32 x4 mm using nut bolt and washer etc complete including taking down to old light fitting in all specification with connecting accessories as directed. Note:- (i) Make:-Bajaj cat No BCLST 30W LED I or equivalent model of make as specified in list of makes Appendix ‘B’ to Particular specifications. (ii) Light fitting of other make of higher capacity may be used without any price adjustment.

Supply and fix in replacement of sheet metal enclosure distribution board TPN, 4 poles ,double door, 4 way with 200 Amps rated copper bus bar vertical type with MCCB, four pole, 415 Volt ,100 Amp rating, 16 KA ultimate breaking capacity thermal magnetic base operated as incomer incl concealed in surface of wall and making all connection using gland, thimbles in required size complete all as specified and directed. Make:- Legrand/ Seimens/ L&T Note:- Quoted rate shall be included cost of MCCB , cutting plastering , coloring to surface of wall to be concealed etc all site required matching with existing surface.

Supply and fixin replacement sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts complete.

S&F MCB, Single pole and neutral, 230 volt, 63 Amp rating 10KA, C series fixed in DBs catered herein before.

S&F MCB, Single pole and neutral, 230 volt, 40 Amp rating 10KA, C series fixed in DBs catered herein before.

S&F MCB, SP, 230 volts, 6 to 32 Amp rating, 10 KA, C series fixed in DBs catered herein before.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 35 sqmm 4 core (earthed) in trenches including cutting, providing aluminium lugs suitable size and cable glands and nut bolts etc with electrical connection in terminal box and testing and commissioning complete including taking out to XLPE/ PVC insulated cable in all specification all as specified and as directed by Engr-in-Charge.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 sqmm 2 core (earthed) in trenches including cutting, providing aluminium lugs suitable size and cable glands and nut bolts etc with electrical connection in terminal box and testing and commissioning complete including taking out to XLPE/ PVC insulated cable in all specification all as specified and as directed by Engr-in-Charge.

Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for wall foundation etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm thick in soft/loose soil.

Removing excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point.

M&L for sand cushioning (dry sand) to under ground cable for cable protection with layer of 8 cm deep before laying the cable and 15 cm depth after laying the cable, complete all as specified and as directed by Engr-in-Charge. Note : Only punned thickness of sand will be measured and paid.

M&L for brick, sub class 'B' well burnt, laid dry flat in trenches for protection of cable over LT/HT cable, complete all as specified and directed by Engr-in-Charge.

Labour for boring to hard standing/ plinth protection/ road etc in depth minimum 60 CM for crossing the GI pipe 40 MM dia of bore complete all as directed. Note :- Quoted rate shall be included cost repair to disturbed surface as site.

Supply, fixing on surface of wall / beam pole etc and laid in trench GI tubing light grade in size 40 MM dia of bore with all fittings complete.

M&L in replacement of unserviceable sub main wiring with two single core FRLS PVC insulated unsheathed stranded copper conductor cable confirmimg to IS-694 with copper conductor of size 6 sqmm and drawing through non rigid metallic PVC conduit (concealed in wall) incl 6.0 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth conductor connected to earth and earth dolly in conduit including connecting to main board including non metallic PVC conduit medium grade not less than of 25 mm dia size with all accessories as specified and directed by Engr-in-Charge. Note : Two single core copper conductor of 6 sqmm including earth wire of 6.0 sqmm including PVC conduit will be measured as single unit length

M&L in replacement of unserviceable sub main wiring with two single core FRLS PVC insulated unsheathed stranded copper conductor cable confirmimg to IS-694 with copper conductor of size 4 sqmm and drawing through non rigid metallic PVC conduit (concealed in wall) incl 4.0 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth conductor connected to earth and earth dolly in conduit including connecting to main board including non metallic PVC conduit medium grade not less than of 25 mm dia size with all accessories as specified and directed by Engr-in-Charge. Note : Two single core copper conductor of 4 sqmm including earth wire of 4.0 sqmm including PVC conduit will be measured as single unit length

Labour for re-calibration to energy meter single phase static for accuracy class 1.0, 240 V 50 Hz temper proof with replacement to old defective part required for making serviceable and re-setting by authorised agency Incl cabin made of GI sheet 2 mm thick in three side and front wire cage mounting on angle iron frame in size 25x25x5 mm fixed with surface of wall using nut bolt and washer etc incl making all connection as existed and directed. Note :- Test certificate issued by OEM shall be deposited in this office.

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 25 MM bore for protection of GI strip from earth electrode and 15 MM as watering with wire mesh funnel charcoal dust, common salt, PCC (1:2:4) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed.

Supply only of insulation tap 25 Mtrs long 12.5 CM width ISI marked suitable for 440 volt grade. Note:- (i) Fixing shall be done by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only to PVC holder with base plate polycarbonate type ISI marked with fixing squire suitable for 440 volt grade 3 pin complete. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only fan regulator stepped electronic flush type 120 Watt 215 volts ISI marked original manufacturer complete. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only PVC insulated multi core copper conductor flexible cable in size 1.5 Sqmm x 3 core for length 100 RM in one roll complete. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only 5 A switch piano flush type 215 volt one way single pole. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only bell AC multi music type complete. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only socket outlet 2 in 1 , 5 pin 5 Amps ISI marked. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only socket outlet 2 in 1 , 5 pin 16 Amps combination ISI marked. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply and fixing in replacement single pole and neutral 4 way double door type with 200 Amp rated bus bar sheet metal enclosure distribution board complete.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri if not mentioned in BOQ.

M/S VIJAY SINGH

M/S AM ENTERPRISES