General Fund 2024-25 Perundurai Town Panchayat

Amount

Plastering in Cement Mortar 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Dadooing the walls with glazed tiles of 15 c.m x 15c.m 6mm size laid in cement mortar 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.Open well 1HP 50Mx25lpm

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Supplying and fixing in position Indian make beveled edge mirror of approved Quality and brand PVC /Fiber framed 600x450x5.5mm thick mirror Shelf type with hard board backing of approved colour fixed with brass screws rawl plug complete complying with standard specification (the mirror should be got approved by the executive engineer before use on works)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. Complete

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD233)

Supply and filling of ISS HBG metal to site including all cost ,conveyance, unloading and filling in Rain water harvesting Pit complete etc.40mm ISS HBG Metal for RWH

20mm ISS HBG Metal for RWH

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point (SD 40)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point (SD10)

Supplying and Fixing of Titanium coated stainless steel sheet (SS304) fabricated Letters of approved size as directed by departmental officers, including cost and conveyance etc. complete complying with standard specification.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of Paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outer members which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Painting two coats new iron work for doors, windows and ventilators using iron bars, window grills weld mesh screen in opt courtyard etc., with two coat synthetic enamel paint and approved quality and color including priming coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and fixing of study table with cabin to site each cabin length =0.90M,W=0.60M,Height of table top from ground = 0.77M,cabin partition height from table top = 0.43m the cost including of all material charges, making charges, required hinges at bottom support, nails, screws for joints and labor etc. complete

supplying and fixing in position of porcelain soap dish size 150mm x 150mm x 50mm dia with necessary accessories,etc complete complying with standard specifications and as directed by departmental officers

supplying and fixing in position approved best quality SS Towel Rack 600mm long with Lower Hanger of same materials including cost of teak wood plugs and cp screws , etc. complete complying with standard specifications and as directed by the departmental officers

supplying and fixing in position approved best quality 5W Led spot light and and Gate light Including all other connection accessories charges , etc. complete complying with standard specifications and as directed by the departmental officers LED spot light

Gate light

Preparing Front Elevation & 3D Drawing ,print out, Consulting and all other charges etc.complete as directed by the departmental officers .

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organization (WHO) Standards with following accessories.(a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pebble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equivalents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.

Supply and Fixing of 75 Inch 4K Ultra HD interactive display with the following specifications CPU - Quad Core A55,O/S - Android 9, writing mode - Finger and pen, Ram & Rom 4GB & 32 GB, Back light - Dled,Resolution - 3840 x 2160,Touching Technology type - Infrared Touch Technology, Ports - RJ45 - 1, Wi-Fi - 1, Hotspot - 1, RS232 - 1, HDMI - 1, 3.5mm (line out) - 1 USB 3.0 - 3, micro USB port - 1 including all necessary electrical connections etc Complete.

Supply and Fixing of ARMOURED LAN & CCTV CABLE, Network video recorder for CCTV, PoE switches for CCTV IP camera, Hard disk for NVR , Cameraconnectiors Set of all connector (BNC,RJ45, RCA) for the cameras and supply and Run co - Axial cable with power / PVC conduct and accessories with the following items etc Complete ARMOURED LAN & CCTV CABLE Cat-6 (PWD SOR Pg. No -164)

NETWORK VIDEO RECORDER FOR CCTV HIGHER END16 Channel - 2 SATA (PWD SOR Pg. No -165)

PoE SWITCHES FOR CCTV IP CAMERA - HIGHER END 8 Port (PWD SOR Pg. No -165)

HARD DISK FOR NVR - HIGHER END 4 TB (PWD SOR Pg. No -166)

CCTV Camera 8MP IP camera with night vision

M M R CONSTRUCTIONS (BID ID -1087085)