Execution of balance work for the Construction of 100 Bedded IPD Block at District Hospital Kishtwar.

Amount

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make (Jindel or Hindalco) conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge glazing,panelling and dash fasteners to be paid for separately.) section to bused for frame101x48x3mm Powder coated aluminum (minimum thickness of powder coated 50 microns)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.)

With floating glass panes of 5.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and fixing 12mm of preliminated particle board flat pressed three layer or graded wood particle board ( conforming to IS:12823 Grade-1) in paneling fixed in aluminum partition frame with CP brass / stainless steel screw etc.complete.

Prelinminated board with decorated lamination on both sides

Providing and fixing powder quoted to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface incl. scaffolding

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.( 1 mm thick) incl. scaffolding

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm incl. scaffolding

Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:( Two coats) incl. scaffolding

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required ( 0.63mm thick with zinc coating not less than 275gm/m2

Providing ridges or hips of width 60 Cm overall width plan GS Sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washer complete( 0.63 mm thic with zinc coating not less than 275gm/m2)

Providing and fixing 32 mmx250 mm plained eves boarding of 2nd classs kail wood

Providing and fixing of Armstrong fibre acoustical suspended ceiling system with Dune Supreme ( bevelled trengular) edge tile with armstrong 1.5mm exposed.

Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Sadar Ali stone ( 1623.30 -150.00 for patti)

Black jet(150 + 170.49) = 320.49 Say 321.00

Extra for making of mouldings of granite stone in stair and also in wall cladding

Providing and fixing of 10mm thick wall cladding tile double charged vertified tile of approved make ( Kajri, Somany and Rack) of size 1200mm are equivalent on wall surface on 15 to 230mm thick cement motor 1:4 including filling of joint with grout to match the shade of slab

Extra for filling of grooves of required width with epoxy of approved make

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Plumbing , Sanitary Installations:-

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid

(European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.(Single piece)

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually control(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 liter white P.V.C automatic flushing cistern.

Providing and fixing G.I inlet connection for flush pipe connecting with W.C. pan.

Providing and fixing wash basin with C.I/M.S. brackets, 15mm C.P. brass taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whenever required:

White vitreous china wash basin size 630 x 450 mm with a pair of 15mm C.P brass pillar taps.

Round basin 405 x 355 mm with single 15mm C.P. brass pillar trap. (Stainless Channel steel)

Providing and fixing white vitreous cement china pedestal wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes respectively. 1 Urinal basin with 5 litre white PVC automatic flashing cistern.

Providing and fixing Urinal Partition/Division Plate.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard.

Rectangular shape 453x357mm

Rectangular shape 1500x 450mm

Providing and fixing 600x120x5mm glass shelf with edge round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Semi rigid pipe 40mm dia

Flexible pipe 40mm dia

(B). C.P. Fitting

Providing and fixing of 15 mm CP bib cock of approved make ( Jaguar make) having code no. CON CHR 037 confirming to IS 2980

Providing and fixing of CP Angle value of Jaguar make having code no. CON CHR053

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040mm bowl depth 225mm

Providing and fixing of CP mixer of approved make having code no. 167 B

Providing and fixing of 600 mm long tower rail of approved make having code no. 1111

Providing and fixing of scuare tower ring having code no. 1121

Providing and fixing of CP soap dish of approved make having code no. 1131 N

Providing and fixing of CP paper holder of approved made with necessary screw and plastic gatti make having code no. 1151

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia

Providing and fixing 10mm sand CP grating for gully, floor or nahani trap.

Providing and fixing of CP couping for urinal

Providing and fixing C.P. brass bottle trap for wash basin including CP waste fittings complete 32 mm dia complete in all respect of approved quality. Makes:-Jaquar/Hindware/Cera

Providing installation and testing of Geyser of approved quality and manufacture jagwar make mounted on bolted, well anchored in wall and connected with hot and cold G.I. connection with superior angle values as required: (25 litres capacity) Make:- Hindware, Jaquar

Providing installation and testing of Geyser of approved quality and manufacture jagwar make mounted on bolted, well anchored in wall and connected with hot and cold G.I. connection with superior angle values as required: (35 litres capacity) Make:- Hindware, Jaquar

Water Supply, CP Fittings, Disposal System:-

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Concealed work, including cutting chases and making good the walls etc.

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Internal work (Exposed on wall)

2532 (32 mm OD) pipe

3240 (40 mm OD) pipe

4050 (50 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. External work

4050 (50 mm OD ) pipe

Providing and Fixing of Thermal Insulation for Hot Water Lines made out of Flexible Elastomeric Foam of Closed Cells Structure Having a Thermal Conductivity of 0.038 W/m.K at 200 Deg C water Vapour Permeability of Cu.m 5000 as Required including accessories i.e Adhesives/Tape on all Joints as per the satisfaction of the Engineers Incharge.

1620 (20 mm OD) pipe

Providing and fixing unplasticised PVC connection pipe with brass unions: 45 Cm length

15 mm nominal bore

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing toilet paper holder with Flap made out of C.P Brass Makes:- Jaquar/Hindware/Cera C.P Brass

Providing and fixing C.P Brass Soap Dish. Makes:- Jaquar/Hindware/Cera

FAYAZ AHMAD BUTT

JAGDISH CHANDER SHARMA