SEWAGE AND DRAIN CLEANING AND REPAIR TO SEWAGE LINE MANHOLES AND ALLIED SERVICE UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT

Amount

Cleaning/clearing of sewage line 150mm dia mechanically by using suction (vaccume) machine from WC to manholes or from cleaning eyes including getting out sludge/ waste from manholes and well flushing after cleaning, removing sludge/ waste to low lying area as directed by Engineer-in-charge (upto 1.5m depth from top of MH to bottom of pipe) all as specified and directed. Note : The suction machine and sewer jetting machine shall be arranged by contractor as directed by Engineer-in-charge during the contract period at his own cost.

All as per item No. 1.00 but 200mm dia sewage lines.

All as per item No. 1.00 but 150mm dia sewage lines (exc 1.5m and n.exc 3.0m in depth).

All as per item No. 1.00 but 200mm dia sewage lines (exc 1.5m and n.exc 3.0m in depth).

All as per item No. 1.00 but 300mm dia and upto 450mm dia sewage lines (exc 3.0m and n.exc 4.5m in depth).

Cleaning of manholes mechanically by using suction (vaccume) machine including getting out sludge/ waste from manholes and well flushing after cleaning, removing sludge/ waste to low lying area clearing the inlet and outlet pipe mouth, etc (depth of MH n.exc 1.5m) complete all as specified and directed

All as per item No. 6.00 but depth of MH exc 1.5m and n.exc 3.0m.

All as per item No. 6.00 but depth of MH exc 3.0m and n.exc 4.5m.

Removing the sludge/ spoil after getting out from septic tanks/ cess pool/ manholes to a distance not less than 1500 mtr including loose dirty stones etc, with combined high pressure water, jetting cum suction (vaccum) type machine mounted on vehicle and having facilities of high pressure of water thermoplastic fibre blended water jetting house and through conical/ round shape nozzle pipe and removing outside MH land in low lying area complete all as specified and directed

Taking out existing of NT/ floor trap C1 grating and cleaning of sludges/ slit from NT floor trap including roding CI pipe from NT/ floor trap to gully trap placing back etc in position including removing of rubbish to a distance n.exc 100m complete all as specified and directed

Cleaning the blockage in IWC, EWC, including roding CI pipe after opening the oval asses door of CI bend C1 branch piece (T) etc upto first MH and placing the OAD in position & removing the rubbish to a distance n.exc 100m complete all as specified and directed

Taking out of gully trap cover and CI grating and cleaning of sludges/ silt from gully traps including rodings SGSW/ CI pipe from gully trap to 1st manhole length n.exc 3.0m) and placing back CI grating PCC cover etc in position including removing of rubbish to a distance n.exc 100 RM complete all as specified and directed

Supply and fixing steel fibre RCC manholes covers frames medium duly circular (as per IS 12592) medium duly for clear opening 450/500mm complete all as specified and directed

All as per item No. 13.00 but 600/650mm.

Cutting of grass, growth/ vegetations, bushes or like and similar work and making the workable space for carrying out cleaning of sewage line/ manholes in any location or condition all as specified and directed.

Excavation in trenches in soft /loose soil, n. exc. 1.5 m wide and n. exc. 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

All as per item No. 16.00 but depth exc. 1.5m and n. exc. 3.0m.

All as per item No. 16.00 but depth exc. 3.0m and n. exc. 4.5m.

Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.

Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and directed.

Material and labour 100mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in path laid in panels, concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Demolition and breaking up drain pipes any dia of bore (SGSW, AC or reinforced concrete pipe) set in cement mortar complete all as specified.

Material and labour salt glazed stone ware drain pipes 150mm bore laid in trenches and jointed complete all as specified and directed.

All as per item No. 25.00 but 200mm bore.

Material and labour PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed.

All as per item No. 27.00 but for 200mm bore pipe

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.

Supply and fixing PVC (SWR) junction single (Single T) 110mm bore complete all as specified

Supply and fixing PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

Material and labour brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:4) complete all as specified and directed.

Material and labour brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Material and labour MS work as small articles for handles, holdfasts, steps, rungs, etc knee piece and similar small article complete all as specified.

Material and labour PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.

Material and labour rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately).

Supply only integral water proofing compound all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Material and labour PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in landing, manholes covers, chajjas, shelves and similar articles with plain fair faces, including champers, weatherings, throating etc. set in cement mortar (1:4) complete all as specified and directed.

Material and labour PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water troughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.

Material and labour cutting into existing manholes for connecting 100mm bore new drains by cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 and making good pipe and reforming benching as required finishing even and smooth complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified.

Dismantling 100mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified.

Material and labour for 100mm cast iron pipes with flanged ends, centrifugally class 'A' in any length laid in trenches complete all as specified

Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 100mm bore pipe complete all as specified and directed.

Supply and fixing cast iron tee diminishing pieces or tapers for 100mm bore pipe complete all as specified and directed.

Supply and fixing cast iron floor trap with grating including jointing to waste pipe in run lead joint fixed in cement concrete type (1:2:4) type B-1 diameter of outlet 75mm, complete all as specified and directed.

Supply and fixing mild steel CP grating 125mm dia with centre hole all as specified and directed by the Engr-in-Charge.

Supply and fixing 150mm dia SGSW gully trap set and jointed in cement concrete as in repairs complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia cut to length bent to shape required including bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking out liquid mud/ loose soil in water from drain of any depth including removing and deposited upto 50m distance all as specified and directed

Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed.

Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) including neat cement slurry complete all as specified and directed.

Uprooting of trees, grass, bushes etc from brick wall/roof tiles or any other surfaces of building including dismantling the required brick work/ roof tiles/ mud concrete etc for uprooting the vegetation etc and make good the same to match with existing surface with same material or concrete (1:2:4) type B-1 after pouring the chemical (which destroy the growth of vegetation to the place where vegetation removed). The rate shall include for scaffolding or any other arrangement required during this process upto 10 mtr height complete all as specified.

Demolition of stone sett paving of any description or thickness, laid dry or laid dry and pointed complete all as specified and directed

Material and labour for 100mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub base of flooring complete all as specified & directed.

Material and labour 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hard standings in any pattern as approved, laid over sand cushion and interstices filled with sand using plate vibrator laid over and including 30mm thick sand cushioning complete all as specified and directed.

Material and labour PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, benching, edges of interlocking/ chequered tiles and the like including weathering, slightly rounded or chamfered angles throating, complete including necessary form work complete all as specified and directed.

M/S Vinod Kumar

M/s GURFATEH BUILDERS

G.S. CONSTRUCTIONS

KARTIK BUILDERS

NEWTON ENGINEERS