Repair and resurfacing the road inside Port medical campus and around Badapadia market

Amount

Earth work excavation in all kinds of soil from the existing ground level in foundation trenches & levelling, ramming as per requirement etc with all leads and lift disposing the excavated material within a lead of 5 km at locations as directed, dewatering etc with supply of all labour, materials, T&P, hire & running charges of all machineries, Port entry fees, all taxes etc all complete as per direction of Engineer in charge.(Excluding GST)

Scarifying bituminous road surface upto 50 mm depth by mechanical means and disposal of dismantled materials up to a lead of 1000 metres or at identified location, stacking serviceable and unserviceable materials separately including all labour, machineries, materials, T&P,taxes excluding GST, fuel, hire and running charges of all machineries etc. all complete as directed by Engineer-In-charge

Providing & laying 20mm thick premix carpet using 0.27cum of 13.2mm to 5.6mm size crushed stone chipping and 14.60kg. penetration grade of bitumen for 10sqm including hand packing to proper camber and consolidation with PRR including hire and running charges of PRR, hot mix plant, bitumen boilers and all other T & P articles as per specification including Supply of all material , labour , T&P, hire and running charge of Equipments,testing charges etc all complete but excluding GST. as ditrected by EIC. (by using mini batching plant and bitumen boiler at site)

Providing & laying 37.5mm & 75mm thick built up spray grouting for one layers 37.5mm thick using 0.45cum of 25mm to 40mm size hard granite metal and 12.00Kg penetration grade of bitumen for 10 Sqm & 0.12cum of 12mm size hard granite chips as key stone for 10 Sqm spreading over and laying including heating pouring and spreading bitumen metal and chips and rolling with PRR after scraping cleaning the road surface applying tack coat using 3.0Kg of bitumen for 10 Sqm including Supply of all material , labour , T&P, hire and running charge of Equipments , etc all complete but excluding GST. as ditrected by EIC.

Providing & laying 6mm thick precoated seal coat using 0.06 cum of 6.7mm size chips as per sieve analysis and 6.8Kg of bitumen per 10sqm. maintain proper camber and consolidation with PRR including hire and running charges of PRR, hot mix plant, bitumen boilers and all other T & P articles with supply of all material labour transporation hire and running charge of equipments,testing charge etc all complete but excluding GST as directed by EIC (by using mini batching plant and bitumen boiler at site)

Blinding road surface with 6mm thick Quarry Dust over the final surface of bitumen with supply of all material labour transporation hire and running charge of equipments, etc all complete but excluding GST as directed by EIC

Engagement of (JCB) or equivalent excavator for excavation, cleaning of over burden materials, debrises at the site to disposal area along with engagement of required machinery, operator, driver, helper and labour etc. all complete as per direction of Engineer-in-charge (Excluding GST).

Cleaning the existing black topped/Concrete work surface with removal of foreign materials with brooms or soft brushes and finally dusting with compressed air to receive bitumin tack coat with supply of all material labour transporation hire and running charge of equipments, etc all complete but excluding GST as directed by EIC.

Supplying, mixing, transporting, laying in proper level and grade Cement Concrete 1:3:6 (1 Cement : 3Coarse Sand : 6 hard granite graded chips of 40mm & down metal, hoisting, laying in layers, by use of vibrator, finished smooth to the exposed surface, to proper level & gradient curing etc. with supply of all materials, labour, T&P, hire & running charges of all machineries, transportation charges,, etc. all complete as directed by the Engineer-in-charge. (Excluding cost of centering & shuttering).(Excluding GST).

RCC work for precast slab of proportion 1:1.5:3 (1 Cement :1.5 coarse sand : 3 Chips) grade using crusher broken hard granite aggregate of 20mm & down size of approved quality, mixing, transporting, hoisting, laying in layers, consolidating by mechanical vibrator, finished smooth to the exposed surface to proper grade with supply of all materials, labour, T&P, excluding cost of GST, , all transportation charges, engagement hire & running charges of all machineries,testing charge etc. complete as directed by the Engineer-in-charge (But excluding cost of binding wire, cost of Steel & labour charges for cutting, bending, binding, placing of reinforcement and cost of centering & shuttering).

Supply Tor/TMT steel of Fe 500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour,materials, transportation charges, T&P, taxes, etc. all completebut excluding GST as per the direction of Engineer-in-charge. NB: No payment shall be made for extra weight than theoretical co-efficient.

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank ofapproved quality for R.C.C. structures and deshuttering and removing the same after dueperiod with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in -charge.

R.C.C. foundation and footing bases of columns mass concrete & pre-cast slab etc.

RCC wall & fins

Providing and laying 50 mm thick bituminous macadam with hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates 25-10 mm @40%,10-5 mm @40%, 5mm @20% of total volume of chips adding premixed with bituminous binder of VG-30 bitumen of 3.3% of total volume, transported to site, laid over a previously prepared surface with required grade, level and alignment and rolled by PRR to achieve the desired compaction with supply of all material labour transporation hire and running charge of equipments, etc all complete but excluding GST as directed by EIC

Supplying and laying 125 Micron polythene separation membrane with overlapping of 300 mm at joints including cleaning the surface before placing the membrane etc., complete including cost of all materials, labour, T&P, tollage, taxes excluding GSTetc, all complete as directed by the Engineer In Chrage. (N.B. : No payment will be made for overlapping.)

Providing and laying factory made premium M30 grade precast concrete paving tiles of 80mm thick with consistent and uniform quality , white cement based pigmented,lacquer coated, mechanically vibrated / compacted and casted in rubberised mould with interlocking slots of approved size,design,colour and cured through drying process and laying in position with proper level and slope over a minimum 50mm thick coarse sand bed with joints of 3mm thick filled with fine sand including levelling with surface vibrator,tamping ,curing and sweeping with cost & supply of all materials,labour,T&P, machineries,,way bill expenses,transportation,loading at factory end,unloading at site including providing barricades to the working area,testing charge excluding GST ,all testing etc.all complete as directed by the Engineer in charge.

Dismantling and removing R.C.C road slab including stacking the useful materials for reuse and removing the debris within 50m with supply of all labour , materials, T&P etc all complete as directed by Engineer in charge. charge. ( Excluding cost of GST).

Supplying & forming 12mm wide X 85mm deep longitudinal joints by fixing 10mm dia 450 mm long HYSD Bars @ 420 mm C/C painted 50mm at center with anticorrosive paint including providing and fixing bitumen paper ,painting one side of concrete surface (250mm thick ) with bituminous black paint cutting grooves of required size and sealing the grooves with bitumastic filter etc. complete with supply of all labour , materials, T&P etc all complete as directed by Engineer in charge. charge. ( Excluding cost of GST).

Providing and supplying 2.5 mm thick road marking strips (retro-reflective) of specified shade/colours using hot Thermoplastic paint applicator machine fitted with profile shoe,glassbreads dispenser,propane tank heater,driven by experience operator on road surface including cost of material,labour,T&P,cleaning the road surface of alldirt,seals,oil,grease and forign materials etc.complete as per direction of Engineer-in-charge and accordance with application accordance with application specification.excluding GST.

Engagement of Unskilled labour for placing the slab in proper place and reffiling the excavated earth with all leads and lifts with supply of labour,T & P,safety equipments etc.complete as directed by Engineer-in -charge.( Excluding GST)

MAA DAKHINAKALI ENTERPRISERS (BID ID -3235534)

M/s. P N Construction (BID ID -3235755)

LAXMIDHAR ROUT (BID ID -3235396)

Samir Ranjan Barman (BID ID -3233767)