NIT No GE/ND-81/2024-25

Amount

Taking up or down steel tubing and connections including cleaning for refixing or removal from site with all fittings for 15 mm bore GI tubings complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site with all fittings for 20 mm bore GI tubings complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site with all fittings for 25 mm bore GI tubings complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site with all fittings for 40 or 50 mm bore GI tubings complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site with all fittings for 80 mm bore GI tubings complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 15 mm bore GI tubings complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 20 mm bore GI tubings complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 25 mm bore GI tubings complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 40 mm bore GI tubings complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 80 mm bore GI tubings complete all as specified and directed.

Refixing old steel tubing and connections of 15 mm bore in new or old position (Walls, ceilings, floors etc) with new fittings etc complete all as specified and directed.

Refixing old steel tubing and connections of 20 mm bore in new or old position (Walls, ceilings, floors etc) with new fittings etc complete all as specified and directed.

Refixing old steel tubing and connections of 25 mm bore in new or old position (Walls, ceilings, floors etc) with new fittings etc complete all as specified and directed.

Refixing old steel tubing and connections of 40 mm bore in new or old position (Walls, ceilings, floors etc) with new fittings etc complete all as specified and directed.

Refixing old steel tubing and connections of 80 mm bore in new or old position (Walls, ceilings, floors etc) with new fittings etc complete all as specified and directed.

S&F in repair gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed for 15mm dia pipe (ISI Marked) complete all as specified and directed.

All as per item No 16.00 above but for 20mm dia pipe complete all as specified and directed.

All as per item No 16.00 above but for 25mm dia pipe complete all as specified and directed.

All as per item No 16.00 above but for 40mm dia pipe complete all as specified and directed.

All as per item No 16.00 above but for 80 mm dia pipe complete all as specified and directed.

S & F in repair repair PVC (SWR) pipes single socketed, 50 mm bore in any length with rubber ring joints, fixed to walls (work will carried out up to six story) complete all as specified and directed.

S&F in repair PVC (SWR) bends/Tees and shoes of any radius of 50 mm bore complete all as specified and directed.

Taking down eaves gutter & rain water pipes ( any size or pattern), incl. all fitting, heads , shoes, bends, swan necks, incl cleaning for refixing or removal from site complete all as specified and directed.

S&F mild steel angle iron, flats, tees, mild steel plain black sheet ( 3.15 mm thick in covering) and such similar articles as in framed work for water tanks covers with necessary welding, riveted and pintol hinges, hold fasts for fixing cover, Handle for lifting complete all as specified, steel work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description no other wise provided for as in covers of water tanks complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed.

S&F, in repair, brass chromium plated towel ring square with round flange fixed with steel screw on wall complete all as specified and directed.

Dismantling asbestos cement or fibree sheet corrugated or semi corrugated sheet in roof coverings complete all as specified and directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed.

S&F joist, channels, angles, tees or other sections fixed independently with or without connecting plates, cleats with necessary welding etc as required complete all as specified and directed steel work confirming to Fe-290 Gde E 165 complete all as specified and directed.

Dismantling unframed timber scantlings as in fillets, rails, posts, rafters, purlins etc under 40 sq cm in sectioon complete all as specified and directed.

S&F, in repairs, wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staple size of mesh 12mm complete all as specified and directed.

M&L for 2nd class hard wood ,plain fillets square, rectangular or triangular in section exc 13 & n.exc 25 sqcm in section , wrought, secured with nails complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer incl preparation of surfaces over 10 cm width of girth complete all as specified and directed.

S&F in repair 100 mm dia cast iron rain water socketed pipes swith cement joints with out ears, fixed to vertical surfaces with necessary clamps etc complete all as specified and directed.

S&F in repair 75 mm dia cast iron rain water socketed pipes swith cement joints with out ears, fixed to vertical surfaces with necessary clamps etc complete all as specified and directed.

S&F in repair 75 mm dia cast iron rain water socketed pipes swith cement joints with or with out ears, laid in trenches or in floors complete all as specified and directed.

S & F in repairs, cast iron bend or elbow for cast iron rain water pipe of dia 100 mm complete all as specified and directed.

All as per item No 38.00 above but 75mm dia complete all as specified and directed.

S & F, in repairs, cast iron branch, single for cast iron rain water pipe of dia 100 mm complete all as specified and directed.

All as per item No 40.00 above but 75mm dia complete all as specified and directed.

S & F, in repairs, cast iron offset projection upto 150 mm, for cast iron rain water pipe of dia 100 mm complete all as specified and directed.

All as per item No 42.00 above but 75mm dia complete all as specified and directed.

M&L for uprooting grass/ plants (girth n.exc 15 cm of trunk to any of plants)grown along the pipes or walls chajjas, parapets and roof or any othder location on the building upt sixth storey height including making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth as directed. with necessary scaffolding/form work required for completion of work upto sixth storey height including all safety factor complete all as specified and directed.

M&L for refixing of shutters of any description in same opening after taking down for resecuring ,easying, repairing or adjusting etc exc 1.0 sqm but n exe 2.0 sqm complete all as specified and directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic walls tiles coloured (450x300mm/300x450), 7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over renderning cement mortar 1:4, 10 mm thick for laying vertical tiles in skirting/dado etc complete all as specified and directed.

M&L for light shade vitrified tiles 9 to 10 mm thick ( Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 50.00 above but as in skirting/dado etc over and including renderning 10 mm thick cement mortar 1:4 complete all as specified and directed.

S&F in repair Brass chromium plated toilet paper holder, fixed to wall with CP brass screws complete all as specified and directed.

S&F in repair Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair Stop valves (angle valve type), cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair water closet vitreous china squatting pan of ORISSA pattern size 580 mm X 440 mm white with integral foot rest incl setting the cast iron trap & pan into cement and sand mortar, provn of lime concrete bedding including valveless syphonic action type PVC low level flushing cistern with inlet ball valve float & handle incl brackets of 10 ltrs capacity complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pattern white incl valveless syphonic action type PVC low level flushing cistern with inlet ball valve float & handle incl. brackets of 10 ltrs capacity complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern Ist quality complete all as specified and directed.

S&F in repair PVC (Plastic polymer Cistern) valve less, Syphonic action type,double button flushing cistern of capacity 10 liters, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete complete all as specified and directed.

S&F in repair Health faucet Chromium plated brass with 1.50 m long flexible pipe for WC complete all as specified and directed.

S&F in repair Vitreous, China wash basin, white , flat back , size 550x 450mm excluding taps, waste chain and plug and porcelain stopper but including the brackets, 32mm dia brass chromium plated waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repair Brass CP mixer (Central hole basin mixer) , for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair PVC mirror cabinet of size 330 mm x 430 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed.

S&F in repair Brass chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair toughened corner glass shelf 6mm thick with brass chromium plated guard and fixing arrangements complete of size 300 mm complete all as specified and directed by Engr-in-charge. Make: Jaguar Cat Part No CAN-1173 or equivalent of make as specified in PS.

S&F in repair Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed.

S&F in repair Bib taps, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down screwed for iron pipe, 15 mm bore complete all as specified and directed.

S&F in repair Tubular towel rail 20mm dia 'D' type brass chromium plated 60 cm long between flanges complete all as specified and directed.

Demolition of cement concrete of any description and in any position, provided for and removing rubbish out of MoD land complete all as specified and directed.

Supply only water proofing compound (PIDIPROOF-LW PLUS) or equivelent as approved complete all as specified and directed.

M & L for Plain cement concrete (1:5:10) type E-2 using 40mm brick course aggregate as in filling under floor as in sunken portion complete all as specifed and directed.

M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in flooring, finished fair and even, mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed. Note : WPC shall be measured and paid separately

M&L for 15mm thick cement plastering on brick or conc surfaces in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed. Note : WPC shall be measured and paid separately.

S&F in repair CI nahani trap with grating including jointing to waste pipe , dia of outlet 75mm fixed in PCC 1:2:4 type B1 (ISI Marked) complete all as specified and directed.

Demolition of reinforced cement concrete in roof, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work as specified including removal out side MoD land complete all as specified. Note with necessary scaffolding/form work required for completion of work upto sixth storey height including all safety factor complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in mud stops, roof kerbs, moulded or chamfered on edges including necessary form work as required complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for cleaning RCC OHT of capacity upto 20,000 Ltrs cleaning walls & floors of tanks by wire brushing & gunny bags etc removing all scale, dirt & mud etc and removing out side the MOD land including washing with bleaching powder and painting the internal surface with black japan bituminous paint complete all as specified and directed.

Removal of debrish/malba out side the MD land to any lead, malba accumulated on the roof of block including stacking of malba and bringing the same to down wards with all safety precautions and cleaning the entire roof surfaces , removal of any vegetation/plants with roots on the roof and making good disturbed surfaces with cement mortar/concrete to match the existing specification during removal of plants etc to the entire satisfication of Engr-in-charge complete all as specified and directed.

M&L for preparation of brick/concrete/existing roof treatment of roof surface by racking out joints of brick terracing tile and cleaning and washing down OR cleaning and washing down of concrete surface and make the surfaces free from dust and other contaminate and providing "Coral water seal-132 or equivalent of FOSROC water proofing treatment 3 to 5mm thick layers, trowel finished complete all as per manufacturer instruction and directed (application of treatment shall be done through application of the manufacturer) complete all as specified and directed Make : Coral industries /FORSOC

M&L for 40mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring (of steps in stair case) finished even and smooth with out using extra cement including making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in ground floors and paving not exc 15 cm thick below or above ground floors ( as in steps of stair case) including removal of demolished material out side MOD land complete all as specified and directed.

Cutting chases pinning in making good to facings to brick walls if required & pointing in CM 1:3 to ends or edges or edges of landings steps, cills, sunshades shelves & cutting chases for concealed water tubing or concealed water tubing, etc and making good, cutting n. exe 10cm. girth complete all as specified and directed.

Providing & injecting chemical emulsion for post constructional antitermite treatment along external wall below conc or masonry apron using chemical emulsion @ 2.25 ltrs per linear meter incl drilling and plugging holes etc in apron complete all as specified and directed.

Treatment of soil under existing floors using emulsion @ 1 Ltrs per hole, 300 mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.

Providing & injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same complete all as specified and directed.

M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of alkali-resistant primer paint and 1.5 mm thick wall care putty complete all as specified and directed. Note:- (a) All work shall be done mechanicallythrough authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer. (c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators (d) cost of above mentioned shall also included in quoted rates.

M&L for preparation of old decorated plastered or unplastered surfaces of wall including complete removal of existing surfaces by using mechanical scrapers and filling holes with putty etc and applying one coats of white wash on old decorated surfaces of wall with necessary scaffolding work required for completion of work upto sixth storey height including all safety factor complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on old decorated wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.with necessary scaffolding work required for completion of work upto sixth storey height including all safety factor complete all as specified and directed. Note:- (a) All work shall be done mechanicallythrough authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer. (c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators (d) cost of above mentioned shall also included in quoted rates.

S&F in repair 32 mm dia PVC waste pipe for WHB & sink, 60 cm long union complete all as specified and directed.

S&F in repair 15mm spindle for suitable for hot and cold quarter turn concilled stop cock spindle complete all as specified and directed.

S&F in repair 15mm spindle for quarter turn bib cock spindle complete all as specified and directed.

Providing & injecting chemical emulsion at points of contact of wall as above of skirting work by termite chemical emulsion @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same complete all as specified and directed.

M&L for Washing, rubbing down and stopping of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for Washing, rubbing down and stopping of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for complete removal of existing treatment and applying 1mm thick wall care putty to achived smooth surface and then applying two coats of oil bound distemper over a coat of chalk whitening as priming coat after preparation of ceiling surfaces complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for complete removal of existing treatment and applying two or more coats of Plastic emulsion paint contains an acrylic polymer emulsion, (ready mixed 1st quality) having of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on new work over a coat of primer over 2 mm thickness cement base putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for preparation of old surface and apply one coat Plastic emulsion paint (ready mix 1st quality) having of approved manufacturer, complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for complete removal of existing treatment and applying texture paint as per design and shape and size shall be as directed by engr-in charge with 1st quality of glossy or matte plastic emulsion paint over a coat of base paint over 2 mm thickness cement base putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for complete removal of existing treatment and applying Finishing walls with textured exterior paint of required shade (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm over a coat of primer over 2 mm thickness cement base putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates. (e) Work shall be executed upto 8th floors

M&L for applying one coat of white wash on old decorated ceiling surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for applying one coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for preparation of old surfaces of walls by complete removal of existing and after preparation of surfaces applying primer and further applying two coat of cement base paint complete all as specified and directed Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for complete removal of existing treatment and applying finishing walls with Acrylic Smooth exterior paint of required shade more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for Washing, rubbing down and stopping of old surface and applying one coat of acrylic Smooth exterior paint of required shade complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days days from start date of the said finishing work. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms/their authorised applicators. (d) Cost of above mentioned shall also included in quoted rates.

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick cement plastering in cement mortar 1:4 with WPC @200 ml per bag of cement on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid saparately

M&L for 5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surface and applying one & more coat of white putty min 1 mm thick on wall surfaces over a coat of chalk whiting priming over tow coat of disteemper oil emulsion complete all as specified and directed.

M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M & L for prepapation of new plaster serface of walls and applying two coats of acrylic emultion weather coat paint over a coat of primer over 1mm thick cement base wall care putty complete all as specified and directed.

M&L for french polishing with one or more finishing coats on old polished wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and directed.

Cleaning, Flushing of chocked and desilting of outdoor sewage lines n. exe 300mm internal diameter of any depth upto three meter. The cleaning shall be carried out with mechanized operation by means of diesal/electric operated vehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacty and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. the sludge deposited in the sewage ling shall be fully ceaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipments and with strick supervision complete all as specified and directed. Note:- (a) The service proider/contractor during the mechanised operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) Manual cleaning operation/scavenging is prohibited. (c) The unit rate quoted by the contractor shall deem to include the cost of providing skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/stilt/liquid/mud and sand (in fou position) etc.

Desluding of existing manholes of depth upto 2 mtr (vol of MH exc 0.20 cum but not exc 2.88 cum)for liquid, solids and slurry material by machanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provison of water for jetting and removal of sludge/silt/liquid/mud abd sand (in foul position) etc removed to outside the MoD land/premises at any distance all as directed by engr-in-charge incluidng loading, unloading, digging outt pit of any size in any type of soil, surring sludge/stilt/spoil/mud etc into the pit and sprreying bleaching power over the entire surface complete all as specified and directed. Note:- (a) The service provider/contractorduring the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with machanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour and skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transpotation arrangements.

Desludging including dewatering of septic tank/soak well in dia/ depth and manholes above 2 mtr in depth for liquid and slurry material and removing the sludge from the tank by machanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr andsuction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skiled driver and operator abd supervising Engineer including provition of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, surring sludge/silt/spoil/mud tec into the pit and spreying bleaching powder over the entire surface complete all as specified and directed. Note:- (a) The service provider/contractorduring the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with machanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour 9skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transpotation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud.

Cleaning of manhole and removing the blockage sludge from manhole by manually with the help of bampos/rods/pipes incluidng rodding and flushing the water and dispose off the sludge out side of MoD land complete all as directed at site for any size, description of manhole up to 1.5 m internal depth complete all as specified and directed.

Cleaning of sewer line and removing the blockage by manually with the help of bampoos/rods/pipes including rodding and flushing the water and dispose off tge sludge out side the MoD land upto 200 mm dia pipes complete all as specified and directed.

Cleaning of Gully trap, Nahni trap, Floor trap, WC,WHB,Urinal and sink by removing the sludge dispossed off from out of defence land by mannually or machanically cleaned with water complete all as specified and directed.

Excavation in trenches in any type of soil (Soft/disintegrated) n. exc. 1.5 M wide and n. exc. 1.5 M in depth for foundation for manholes/shafts or sewer line etc. n. exc. 10 sqm on plan & n. exc. 1.5 M in depth & getting out soft loose soil complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exc 15 cm in thick below or above ground level complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete)set in cement mortor & removing demolished material out side defence land (Bore of pipe 100mm) complete all as specified and directed.

M & L for SGSW drain pipe grade 'A' 100mm bore (internal) including laying in trenches and jointing in cement & sand morter 1:2 & testing complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggragated) as in bed including packing under & haunching against sides of SGSW drain pipe 100mm bore after they are laid & tested complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming soil in layers n. exc. 25 cm thick complete all as specified and directed.

Removing excavated materials/surplus soil out side of defence land up to a total distance of 1.5 Km complete all as specified and directed.

Demolition of brick work or stone/ boulder masonary built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with sub class B bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggragated) as in benchning, copings, channels, slightly chamfered or rounded on edge including necessary use of form work complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work or cement concrete surfaces, finished even and smooth without using extra complete all as specified and directed.

Demolition of RCC manhole cover slabs and similar suspended work incl (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

S&F precast RCC 1:2:4 manhole covers slabs any size, thickness with 3 mm thick FL around cover slab complete all as specified Make PPRC, polycrete including reinforcement as per manufacture design with frame complete all as specified and directed.

Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate finishing smooth and refrming benching as required for 150 mm dia pipes complete all as specified and directed.

S&F in repair Cast Iron trap ''P'' for cast iron pipe of size 100mm, complete all as specified and directed.

S&F in repair Cast iron floor trap of size 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4:), complete all as specified and directed.

S&F in repair salt glazed stone ware gully trap of size 180X150 mm squire or rounded mouthed, type "P" complete all as specified and directed.

S&F in repair Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints,laid in trenches or in floors of size 100 mm bore complete all as specified and directed.

S&F in repair Cast iron bends (any radius) with ducks foot or heel rest of size 100mm bore of pipe complete all as specified and directed.

S&F in repair Cast iron bends (any radius) with ducks foot or heel rest of size 75mm bore of pipe complete all as specified and directed.

M/S SONU ENTERPRISES (BID ID -3147324)