Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹34.0 L+₹3.0 L (9.61%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹34.1 L+₹3.1 L (9.91%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
18 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Srinath PL
GE I Kanpur Cariappa Road Cantt Kanpur 208004
PERIODICAL SERVICES AND OTHER MISC WORKS AT DSC LINE, NARANG VIHAR AND OTHER UNITS UNDER AGE B/R-II OF GE(I) KANPUR
2022_MES_539473_1
GE(I)/KAN/T-44 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
KANPUR
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (I) KANPUR
₹80,000
Yes
6 Oct 2022
20 Jul 2022
25 Aug 2022
20 Jul 2022
18 Aug 2022
4 Aug 2022
60 days
Amount
M/L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying one coat of white wash on wall complete all as specified and directed.
M/L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying one coat of white wash on ceiling complete all as specified and as directed.
M/L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of cement base paint on wall with brush complete all as specified and directed.
Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. applying Two coats of cement base paint (approved colour) over a coat of primer complete all as specified and directed.
Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling complete, with help of hand opeated sander or by manual where it is feasible and preparing the surfaces smooth including necessary repair to depressions/cracks by wall care putty/POP and applying two coats of exterior weather proof anti algae (Product : Asian Paints Apex) 100% acrylic emulsion over a coat of exterior water based primer. The primer and paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed. (Make : Asian Paint or equilvalent of makes as specified).
Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling complete, with help of hand opeated sander or by manual where it is feasible and preparing the surfaces smooth including necessary repair to depressions/cracks by wall care putty/POP and applying two coats of exterior weather proof anti algae (Product : Asian Paints ACE Sparc) 100% acrylic emulsion over a coat of exterior water based primer. The primer and paint will be applied through with aireless spray techonology with max working pressure of 3300 PSI by Trucare graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed. (Make : Asian Paint or equilvalent of makes as specified.
M/L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of oil bound distemper (any Colour ) on wall with brush complete all as specified and directed.
Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall complete , applying a coat of 1mm thick wall care putty with the help of machine (mechanically) on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc. complete as per manufacturer's instructions and directed at site. Make- Birla / JK white and applying two coats of oil bound distemper (any colour) with the help of machine (mechanically) over a coat of primer complete all as specified and directed.
M/L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour)complete all as specified and as directed.
M/L for preparation of old painted surfaces of iron and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour )complete all as specified and as directed.
Demolition of brick work built in cement mortar complete all as specified and as directed .
M&L Brick work old size sub class ' B' bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specifed and directed.
M&L 15mm thick rendering on fair faces of brick wall in CM (1:4) finished even & smooth complete with using WPC all as specified and directed. Note WPC shall be measured and paid separately
M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5 mm thick cement plaster on ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour on over a coat of primer over applying a coat of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed.
M&L for preparation of new surfaces of wall and Applying two coats of cement base paint over a coat of primer on wall complete all as specified and directed.
M & L preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.
M & L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, including 10mm thick rendering in CM(1:4) complete all as specified and directed
M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed.
Taking down chowkhat or frames with shutter (without taking of shutters from the frame) n. exc 1.5 sqm complete all as specified and as directed.
Taking down chowkhat or frames with shutter (without taking of shutters from the frame) exc 1.5sqm but n.exc 4.00sqm complete all as specified and as directed.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with MS Square tube edges will be painted to match with prelam sheet as per specification & drawing incl. making good the damaged wall with plaster or concrete complete all as specified and directed.
S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face as per specification & drawing, complete as specified and directed.
S &F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel pin, anodised and fixed, Type C-21, complete all as specified and directed.
Supply and fixing 150 mm aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm size extuded aluminium handle fabricated type anodized complete all as specified and directed.
S&F 3 track window frame(124mmx50mm) shutter of uPVC solid foam profile window sill element FP 12419 (124mmx19mm thick) and 3 track sliding element FP 7132(71mmx32mm) grooved sill element. Sliding shutter are made of vertical and horizontal stile element FP7128(71mm Wx 28m thk) having GI 'C' section (39mmx19mmx19mmx0.60mm thick stiffener and telescopic 'L' corner, Infill panel is clear to translucent PC sheet Or 5 mm thick glass is fixed in the shutter using beading element 12 mm W x 10mm thk by SS headless nails including SS wirecloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with S.S staple pins window frame is strengthen by GI clamps (120x120x75mm) at all four corners. External /internal cover moulding/architrave is provided to cover gap between masonary wall and frame due to plumbing error in masonary work and elegant look all complete as specified and directed.
S&F, aluminium chequered grills , weight n.exc .0.50 kg / sqm and fixed all as specified and directed by Engg- in Charge.
M&L for rigid PVC foam profiles ventilator. Horizotal frame member is made of profile of required size 88x12mm and vertical member strips are made of 71 mmx28mm with MS pipe stiffener (19x19x0.8mm thk) vertical frame member with help of required size CSK screw and adhesive. Total unit is fixed with help of bracket/fasteners including 4 mm thick frosted glass and SS Jalli as per requirement.
M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden /metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick figured glass pin haded type and glazing with oil putty in squares n. exc 0.5sqm in each pane complete all as specified and directed.
S&F in 3mm thick Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each incl hacking out complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and 1.40 mm averaage width of operature fixed with tinned tacks or galvanished wire staple complete all as speficied & directed.
S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifed. (Make : Blue Star/Nirali as approved by GE).
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc and complete all as specified and directed.
M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking flatforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Labour only for making rounding to edges of granite slab in cooking platform and complete all as specified and directed.
S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed.
S&F in repairs waste pipe for Sink/WHB/Urinal, length exc 0.75m and complete all as specified and directed.
S&F, stainless steel curtain rods of 20mm dia as in doors/ windows pelmets.SS brackets fancy type , including screws and other necessary fitting for fixing brackets SS Funnels for 20 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.
Supply only water proofing compound.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge). minimum compressive strength 50 N/mm2 modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in charge
KALI CHARAN PANDEY
Khushi Muskan Engineer & Developer
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .