Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.5 LAdmitted-Finance | ₹22.5 L | L1 | Admitted-Finance |
| 2 | L2₹24.1 LAdmitted-Finance 108 BADA CHAKA NAINI ALLAHABAD | ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | ₹24.1 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Tender Fees EMD not Deposited |
| Sl No | Description | Qty | Unit | KHUSHI ENTERPRISES L2 | HARE KRISHNA ENERGY PROJECTS L1 |
|---|---|---|---|---|---|
| 1.00Safe loading carriage including unloading & proper stacking of following store materials from any Electy.Store of Lucknow Zone to work site/JE Dump Store. | |||||
| 2.00 | 33 KV Bus Isolator | 1 | No. | 2,000 ₹2,000 | 1,500 ₹1,500 |
| 3.00 | 33 KV Lightening Arrester | 3 | No. | 500 ₹1,500 | 100 ₹300 |
| 4.00 | 33 KV VCB 800 Amp., 750 MVA | 1 | No. | 6,000 ₹6,000 | 5,000 ₹5,000 |
| 5.00 | 33 KV CT 200/100/1 Amp. | 3 | No. | 1,000 ₹3,000 | 1,000 ₹3,000 |
| 6.00 | ST/Joist Girder Pole 11 Mtr. | 48 | No. | 700 ₹33,600 | 850 ₹40,800 |
| 7.00 | ST Pole 13 Mt Long-SP-70 | 2 | No. | 700 ₹1,400 | 1,000 ₹2,000 |
| 8.00 | Extra Cost of Stay at Right Angle | 8 | No. | 100 ₹800 | 100 ₹800 |
| 9.00 | 8.5 Mt. Long PCC Pole | 3 | No. | 600 ₹1,800 | 550 ₹1,650 |
| 10.00 | LT ABC conductor (3x50+1x35+1x16) | 150 | Mtr. | 8 ₹1,200 | 10 ₹1,500 |
Tender Value
₹28.4 L
EMD Value
₹28,360
Closing Date
22 Dec 2025, 12:00 pmClosed
SE EWCL
ELECTRICITY WORKS CIRCLE LUCKNOW MVVNL, TIPE IV/3, TRANSMISSION STAF COLONY, DEVA ROAD, CHINHAT, Lucknow
CONSTRUCTION OF 33 KV TAPPING LINE FROM 33 KV PTC LINE AND 33 0.4 KV 250 KVA SUBSTATION FOR GIVING URBAN SUPPLY TO JAWAHAR NAVODAYA VIDYALAYA UNNAO UNDER DEPOSIT SCHEME
2025_MVVNL_1098564_2
22/EWCL/2025-26
Open Tender
Electrical Works
90 days
Unnao
AS per PQR
2 documents required · 2 mandatory
₹3,540
Superintending Engineer Electricity Works Circle L
₹28,360
26 Dec 2025
16 Dec 2025
22 Dec 2025
16 Dec 2025
22 Dec 2025
16 Dec 2025
Amount
Safe loading carriage including unloading & proper stacking of following store materials from any Electy.Store of Lucknow Zone to work site/JE Dump Store.
33 KV Bus Isolator
33 KV Lightening Arrester
33 KV VCB 800 Amp., 750 MVA
33 KV CT 200/100/1 Amp.
ST/Joist Girder Pole 11 Mtr.
ST Pole 13 Mt Long-SP-70
Extra Cost of Stay at Right Angle
8.5 Mt. Long PCC Pole
LT ABC conductor (3x50+1x35+1x16)
V-type cross arm 100x50x6 mm, MS Channel 9.6 Kg./mtr
Polymeric 11 KV Disc Insulator B&S. Type 70 KN.
11 KV Disc Insulator B&S. Type 70 KN.
Disc Fittings Dog/ Racoon 70 KN.
Disc Insulator B&S. Type 70 KN.
Polymeric 33KV Pin Insulator
33KV Pin Insulator
33KV Pin with Nut
M.S. Angle Iron 65x65x6mm, 4300 mm long 2/6/8 no. Bracing, with 4/12/16 clamps (5.8 kg./m)
M.S. Angle Iron 65x65x6, 3200mm long, 5.8 Kg/Mtr. for cable with clamp
Top channel 125X65mm, 3200 mm long (13.10 Kg./m) with clamp
Dropper Channel M.S. 100x50x2600 mm
MS. Channel 100X50 mm (9.6 Kg/mtr.) for Cable Stand
MS Angle 75x75x6mm (6.8 KG/mtr) for Cable Stand
MS Channel 125x65, 3.2Mtr. Long 1,2,3,4 No Pieces for Top channel. 13.10 Kg/Mtr.+wastage.
MS Angles 75x75x8, 2.6mtr long, total 5.2 @ 8.9 Kg/Mtr.
MS Angles 50x50x6mm for bracing type members of T.G./B.G./Trench
MS Round of 32 mm dia for earthmat (6.1 Kg/Mtr.)
GS/GI Earthwir
Earthing complete
ACSR Dog Conductor
Stay Set Complete
33 KV XLPE Cable 3x120 sq.mm.
LT XLPE Cable 3.5x400 Sq.mm.
LT XLPE Cable 3.5x240 Sq.mm.
33 KV XLPE C/J/Kit (Outdoor) of size 3x120 sq.mm.
33 KV XLPE C/J/Kit (Indoor) of size 3x120 sq.mm.
33 KV Pilfer proof metering cubicle
3 PH-4 W Static TVM 33 KV
33/0.4 KV 250 KVA Transformer
33 KV Single T/F Control Pannel with Structure.
Earth Mat Laying of earth mat in the switchyard by laying of M.S. Round of 32 mm dia in 500 mm deep trenches with M.S. Round 32mm dia,3Mtr. Long earth electrodes as per drawing. The work includes welding of the M.S. Round, connecting all steel structures in the switchyard with the earth mat by means of G.I. strips of size 50x6mm as per item below.
Excavation of earth for laying mat
Driving of earth electrode.
Laying of earthmat (M.S.) Bar including cutting, shaping and binding etc)
Preparation of joints, proper making and welding; of main earthmat bar joints and applying, bitumen impregnated Paint on joints i.e. End Joints. Cross Joints, Lap Joints.
Welding of riser strip with earthmat and department structure body (One set means one riser strip welding to main equipments).
Fabrication, Errection & Grouting of Substation Structure:
Bus Isolator Structure: Fabrication of Isolator Structure 3.5 mtr in height as per Drg. digging of two no. pits of size 1.075x0.9x0.3 mtr. providing Stone Pad at the bottom of the pit and grouting of two legs of the isolator structure in CC(cement coarse sand and stone grit of 20mm gauge) of the ratio 1:4:8 in block of 1.075x0.3 mtr. including all civil material, T&P complete in all respect. The work includes dragging, shifting up to 40 Mtr., raising and erecting the two legs with runner on proper alignment and level and plumb. Both plinths of the isolator structure shall be properly finished with smoothing of edges.(All decentralised materials to be provided by Contractor).
Lightening Arrestor, Post Insulator,Fuse Set & CT Structure : Fabrication of Lightening Arrestor, P.I. & CT Structure 3.5 mtr. in height as per Drg. digging of two no pits of size 1.075x0.9x0.3 mtr. providing stone pad at the bottom of the pit and grouting of two legs of the Structure in CC(cement coarse sand and stone grit of 20mm gauge) of the ratio 1:4:8 in block of 1.075x0.3 mtr. including all civil material, T&P complete in all respect. The work includes dragging, shifting up to 40 Mtr., raising and erecting the two legs with runner on proper alignment and level and plumb. Both plinths of the structure shall be properly finished with smoothing of edges. (All decentralised materials including Post Insulator to be provided by Contractor).
Plinth of VCB : Construction of Plinth of size 2.0 mtrx1.5mtrx0.9mtr. suitable for erection of upper structure of 33KV VCB including grouting of anchor bolts in proper alignment and level. Scope of work includes excavation of foundation base and concreting in CC 1:3:6 (cement, find sand & stone grit) 1st class brick work in cement mortor ratio 1:4:8.(All decentralised materials to be provided by Contractor).
Erection and installation of 33/0.4 KV 250 KVA T/F
Erection and installation of 33/0.4 KV 250 KVA T/F in a levelled position of the plinth. The work includes shifting of T/F to the site & installation within the S/S premises, assembling, fixing and fitting of all accessories with required packing and filling of T/F oil upto desired level. Ensuring that there is no leakage and all jumpering & connection are included in the scope of work. .(Copper L-Piece, Al-lugs, Cable Glands and nut-bolts & washers etc. to be provided by Contractor)
Earthing of T/F (Body & Neutral), LA/CT/PI/VCB Structures by way of boring and lowering of 40mm dia, 2.9 mm thick GI Pipe B class from ground upto the water level (minimum 60 feet deep) as per standard practice as per RESPO/REC Drg with making of earth pit of 300x300 mm & 1 feet deep with Cover. (All materials to be provided by Contractor).
Fabrication and erection of cable support made of two pieces of MS channel 100x50mm, 3.0 mtr. long joined to each other by means of 5 no. MS Flat 50x6mm pieces of size 150mm long each by welding at equal intervals as per drawing and grouting in block of size 300x300x700mm (1:4:8) complete. This includes providing of required MS Clamp made of MS Flat holding the cable including nuts & bolts and fixing of XLPE cable .(All decentralised materials to be provided by Contractor).
Installation of Bus Isolators: Assembling and installation of line/ bus isolator on the isolator structure adjusting of opening mechanis in proper alignment so as to ensure smooth operation of the same. In case of line isolator proper operation of earth links shall also be ensured. The work includes fabrication & proper connection with earthmat/earthing by G.I. earth strip 50x6mm proper fixing if required (All decentralised materials to be provided by Contractor).
Installation of P.I. & Lightening Arrestors : Assembling, installation & mounting of 3 No.(1set) L.A. & Post insulator on the L.A & P.I. Structure/complete with making earth connections (separate) with GI Strip 50x6mm. The work includes fabrication for fixing if required. (All decentralised materials to be provided by Contractor).
Installation of CT: Installation of 3 No.(1 set) CT on the CT Structure along with CT Junction Box. The work includes fabrication, proper fixing of C.T. with making earth connections(Earth Mat/earthing) with GI Strip 50x6mm and control wiring connection, proper commissioning & testing.(All decentralised materials to be provided by Contractor).
Installation of VCB: Installation of 33KV VCB complete work with making earth connections(Earth Mat/earthing) with GI Strip 50x6mm including control wiring, commissioning & testing (All decentralised materials to be provided by Contractor).
Installation of LT MCCB Panel :
Supply & installation of LT MCCB Panel (One incoming (630 AMP)+ 3 Outgoing (250 AMP)) and fixing of LT MCCB Panel on foundation providing G.I. Bolt & Nuts of proper size in proper position and alignment. This includes checking, complete work with mounting of P.T. on incoming S/G with proper testing, connetion of earthing & commissioning of switchgears.
Fixing and making Bus Bar connections in between all switchgears after cleaning and tapping with H.T. Tape, empire tape and PVC tape properly, providing and fixing of 6 mm thick Bakelite separators and plugging of all opening & holes with plastic compound complete work as per required.
Shifting carefully and installation of 33KV Single Transformer Control Panel in Control Room including fixing, bolting & grouting of above as per required and testing, commisioning complete work as per required.
Earthing of 33 KV Switchgears & Equipment: Earthing of 33 KV Switchgears equpiment by lowaring and boring of Chemical Earthing outside of switchyard and connecting through G.I. Strip 50x6mm with indoor/outdoor equipments with making of earth pit of 300x300 mm & 1 feet deep with Cover. (All the material provided by the contractor)
Painting of all structures and equipments with good quality ISI Mark one coat of red oxide primer & two coats of Aluminium Paint. (All materials to be provided by Contractor).
HT Cable Laying :
Laying & dressing of 33 KV 3x120 Sq.mm XLPE cable from 33 KV O/G Switchgear by excavation of trench in the ground of size 450mm wide, 900mm deep providing 150mm fine sand cushion below & above the cable. The cable shall be duly protected by bricks, sand & stone slab and refilling & ramming of the left out soil. Spare cable shall be left and buried in the trench in the shape of rings at both ends. Cable laying work includes unrolling, cutting, making ring and sealing both ends of the cable. (All decentralised materials to be provided by Contractor).
Laying & dressing of LT XLPE Cable 3.5x240/400 Sq.mm from LT MCCB Outgoing. Cable laying work includes unrolling, cutting, making ring and sealing both ends of the cable. (All decentralised materials to be provided by Contractor).
Hoisting of 33 KV Cable with 100 mm dia 3 Mtr. long GI Pipe on the feeder cable before mounting the cable on the double pole, lifting, mounting and clamping of 33 KV feeder cable boxes on the feeder double pole structure and making connection including supply of cable mounting clamps. The work includes the sealing of GI Pipes, lower end of the pipe is to be buried into the earth by about one foot.(All decentralised materials to be provided by Contractor).
Construction of Control Cable trench of size 300x300mm including brick work 1:4 in wall of the trench, brick ballast work in 1:5:10 on foundation plaster 12mm thick with coarse sand 1:4 and surface finishing with cement, providing MS Strip at an interval of 0.5 Mt. and MS Angle (25x25x5mm) running on both the edges of trench. (All decentralised materials to be provided by Contractor).
Construction of welded frame type control cable trench cover 0.5 Mt. long suitable for trench including cost of MS/Tor Bar.(All decentralised materials to be provided by Contractor).
Supply and laying of following size Copper Control Cable through underground/cable trench/trenching SGR interlinking through proper connections to T/F Control panel/protection board/Battery and Battery Charger/Bunch joints, Relay 33/11KV T/F junction Box/33KV VCB, CTs etc. as per site conditions:
2x2.5 Sq.mm
4x2.5 Sq.mm
Supply and fixing of Control Cable Trey
Fixing of Single Core PVC Cable, 1x240/400/630 sq.mm. & fixing between Transformer incoming 3x300 Sq.mm XLPE Cable and Transformer 11 KV/LV Side Bushing connector for reducing of tension at LV Side Bushing.
Supply and Installation of 24 Volt Battery and it charger with connections to existing control circuit complete in all respects.
Construction of T/F Plinth Size 2x2x1.5 mtr with M.S. Channel 125x65 mm on Top
Laying of LT ABC conductor (3x50+1x35+1x16) for switchyard &out door Lightening with all connector,deadend clam&suspenssion clamp on 8.5 Mtr PCC pole.
Soli Filling with interlocking tile fixing work complete
Installation of 33 KV Pilfer Metering Cubicle in meter room with both side cable connection with proper loading,unloading and staking
Installation of 33 KV CT/PT Metering Pole Mounted Unit on Double Pole outside consumer premises with both side cable connection with proper loading,unloading and stacking.
Metering room with gate of size (10x10x10) Cu. Ft. for 33 KV Metering Cubicle and control room with gate of size (10x10x10) Cu. Ft. for 33 KV VCB Control Panel & LT panel (both saperate)
Testing & Commissioning of all equipment
33 KV High Pressure Testing
Earthing for Main Meter Cubical /CT PT Unit by way of boring and lowering of 40mm dia, 2.9 mm thick GI Pipe B class from ground upto the water level (minimum 60 feet deep) as per standard practice as per RESPO/REC Drg with making of earth pit of 300x300 mm & 1 feet deep with Cover. (All materials to be provided by Contractor).
Chemical Earthing of 33 KV Main Meter Cubical /CT PT Unit by lowaring and boring of Chemical Earthing outside of switchyard and connecting through G.I. Strip 50x6mm with indoor/outdoor equipments with making of earth pit of 300x300 mm & 1 feet deep with Cover. (All the material provided by the contractor)
Chain link fencing of Sub Station With Gate & ToeWall for 11/0.4 KV 250 KVA T/F Substation 4x4 Sq.mm.
Fixing & supply of 40 watt. LED street light complete fitting and of standard quality ISI markwith water light fittings, elbow etc. complete in all respect and suitable for above supports.(All materials to be provided by Contractor).
Erection of the following support through digging pits complete in all respect including cutting, making holes, fixing of all types of accessories as per RESSPO/REC drawing. (All type of clamps nut & bolt, washer to be provided by contractor.)
Providing & Fixing of Stone Pad (300x300x75 mm)
33 KV Single support of ST Pole 11mtr long.with X Arm, Pin insulator with all accessories as required.
33 KV Single support of ST Pole 13 mtr long.with X Arm, Pin insulator with all accessories as required.
33 KV Double pole structure on S.T. Pole 11mtr long complete with Top Channel, bracing & all other acessories as required
33 KV End Type Double pole structure on S.T. Pole 11mtr long complete with Top Channel,bracing.& all other acessories as required
Tri Pole structure on ST Pole 11mtr long complete with Top Channel,bracing.& all other acessories as required
Four Pole structure on ST Pole 11mtr long complete with Top Channel,bracing.& all other acessories as required
Stud Pole structure on ST Pole 11mtr long complete with all acessories
PCC Pole 8.5 mtr long. with LED street light & all accessories as required.
Concreting of supports with cement, concrete (CC will be of cement coarse sand & Stone Grit) Grouting will be done with the help of wooden/steel formers in a block of size 450 mm x 450 mm x 1/6 of the full length of the support in the CC 1:4:8 ratio and plinthing of supports upto 300mm above ground level as per RESPO/ RES. drawing including back filling and proper ramming.
Earthing of supports with Earth Electrode 2.5 mtr. length including excavation of pit and driving M.S. Rod upto proper depth and connecting the earth electrode with the help of 6 SWG G.I. Wire and earthing lugs. RESPO/ RES. drawing.Earthing of each section pole is also to be done. (All type of clamps nut & bolt, washer to be provided by contractor.)
Erection/fixing for 33 KV Stay set with stay wire 7/8 SWG and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in size 0.60x0.60x0.3 mtr. ratio 1:4:8 of cement, sand and concrete (CC will be of cement coarse sand & Stone Grit). (All type of clamps nut & bolt, washer to be provided by contractor.)
Laying, spreading, lifting, Stringing, jointing and final sagging of ACSR Dog Conductor in accordance with profiles and sag chart including binding, jumpering and fixing of all accessories in 3 nos. conductor in parallel with PG Clamp binding wire etc as requested for job.
Guarding between two poles like single/double/Tri./Four Poles etc. to guardLT/11 KV/Telephone lines, Road/River Crossing etc. with G.I. Wire 6 SWG and G.I. Wire 8 SWG including fixing of guarding channel of requested site with clamps and nuts and bolts as per RESPO/ RES. drawing
Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of job. (All materials to be provided by Contractor).
Single Pole of 11 M S.T.P
Single Pole of 13 M S.T.P
Double Pole of 11 M S.T.P
Tri Pole of 11 M S.T.P
Four Pole of 11 M S.T.P
End Type Double Pole of 11 M S.T.P
Stud Pole of 11 M S.T.P
Providing & Fixing of 33 KV SMC Danger board ( as per RESPO/REC)with Clamp & Nut Bolt
Providing & Fixing of 33 KV SMC Number Plate ( as per RESPO/REC) with Clamp & Nut Bolt
Providing & Fixing of G.I. Barbed wire (2 Kg./pole)
Looping of branches of trees along the route of Line and disposal of the same after obtaining permission of competant Authority.
Cable Route Marker
Processing for NOC from Electrical Safety Department/Forest/Irrigation & Road Restoration.
KHUSHI ENTERPRISES (BID ID -5759184)
Bidder Name
KHUSHI ENTERPRISES
HARE KRISHNA ENERGY PROJECTS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
SBD22.pdf
Tender Documents • 0.97 MB
TenderFormSchedule.pdf
Additional Documents • 0.27 MB
BOQ_2025683.xls
BOQ • 8.14 MB
Download all tender documents and submit your bid