Rejuvenation of existing road side illumination system from north side of welcome gate to starting point of municipal area on 12no road by supply, fitting, fixing of street polls, energy saving LED Street Light 120watt and cable including Painting o

Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980) for following designation and of following, dimensions 410-SP-33; 9.0mtrs: 164 Kg Make: reputed brand.

S/F M. S. loop box (10 SWG) of size 10.3/4 “x 8.3/4” x 5" Each 1147.00 (269mm x 219mm x125mm) having almirah type cover complete with special type locking arrangement including S/F 8 “x6” x1/4" (200mm x 150mm x 6 mm) bakelite sheet 1 no. 4-way ebonit connector block, 1 No. 15 Amp fuse unit fitted inside the box and suitable size danger board riveted on cover of the box outside & fixing the box with pole by means of M.S. Clamps of 1"x1/4" (25mm x 6mm) of suitable length and encasing the box by 1:3:6 cement concrete with graded stone chip (3/4" down). The depth of the concrete should be 60cm x 54cm x 54cm including plastering and neat cementing and S/F 2 Nos. compression gland of suitable size and making all necessary connections as reqd.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportionand Dimension indicated below), having 600x660x150 mm thick CC (4:2:1) base block below sole plate/ pole with hard jhamametal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 km from Store to Work-site including filling up the excavated earth pit with shifted soil and ramming properly. Upto 9 mtr. Size: 0.6m x 0.6m x 1.70 mts.

Extra on items 3 above, for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Supplying, delivery and fixing of 1.5 mtr. Long GI Single Arm Bracket (with minimum 48.8 mm OD GI Pipe, but will be suitable for pole and LED fixture)

Painting Block Letters or Digits within a circle / square as required, with "Black Japan" paint of approved make & brand, the size of letters and digits as given below: Size 50 mm and upto 75mm

Supplying and Delivery of 120W LED fitting, New generation energy saving & environmental friendly long life versatile pressure die cast alminium IP66, road way luminarie with high power LED as light source. CHIP Make : reputed brand Make : reputed brand conforming to latest NABL accreditation. Inbuilt stilco filled Potted LED Driver should be given and is should be BIS certified. With installation of CCMS facility. System Efficiency : Greater than or equal to 120 Lumen/Watt LED should be warranty for 5 years with LM 79 report should be submitted

Supply, delivery and laying of 3 core 2.5 Sq.mm. Flexible Multicore Copper cable as per IS 694 (connection from Loop box to Light Fixture) Make: reputed brand & test report should be submitted.

Supply of 1.1 KV grade XLPE insulated Aluminium conductor armoured Cable 4 core 16 Sq.mm. Make: reputed brand test

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed