SPECIAL REPAIR TO BLDG NO P-309 OTM AT EBS BABUGARH AND PROVN OF 02 X SHALLOW WELL IN FARM AREA TO AUGMENT IRRIGATION FACILITIES AT EBS BABUGARH UNDER AGE B/R-II AND AGE E/M-I OF GE (NORTH) MEERUT CANTT

Amount

Demolition of brick work or stone boulders masonary built in cement mortar including all arches, pillars etc complete all as specified and directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes and disposal of debirs complete all as specified and directed

Dismantling, Asbestos cement (Plain,corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work complete all as specified and directed

M&L for brick work with fly ash sub class 'B' old size bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as specified and directed

All as per item No 5 above but except bricks

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed

S&F GI snap grid frame work for false ceiling of size of grid 605x605mm all as specified and Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to steel frame work complete all as specified and directed.

S & F fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions complete all as specified and directed

M&L For Providing and fixing 10mm thick plaster of paris sunk or raised mouldingceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately complete all as specified and directed.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surroundingwall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed by Engr -in charge.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with single cleats or other connecting plates quality conforming to Fe-410W(Gde E-250). quality A complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified and directed

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each complete all as specified and directed

S & F 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed

M & L for Anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) door Shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium Complete fittings including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F, in repair, Double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete all as specified and directed

S&F in repair , Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed

M & L for 1st class wood hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed

S & F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with (SUNMCA) lipping/frame to match complete all as specified and directed

S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a) complete all as specified and directed

S&F, in repair, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F, in repair for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings complete all as specified and directed

S & F in repair for Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed

S&F 100 mm butt hinges, meium weight cold rolled mild steel complete all as specified and directed

S&F aluminium handle cast type anodised 125 mm long complete all as specified and directed

S&F, aluminium anodised barrel tower bolt 150 mm, extruded section complete all as specified and directed

S&F, in repair, Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed

S&F, aluminium anodised barrel tower bolt 200 mm, extruded section complete all as specified and directed

S&F, aluminium anodised sliding door bolts with hasp and stapple extruded section or cast aluminium alloy 300 mm long complete all as specified and directed

S & F, in repair, 18/19mm thick Soild MDF board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to MDF frame work in cup boards, rebated or flat edged fancy handle , Magnite lock complete all as specified and directed.

S&F 1000 ltr White rotational moulded polyethene water storage tank ( cylinderical verticle with closed top) hoisted and fixed in position complete all as specified and directed

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms complete all as specified and directed

S&F in repair gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and wall complete all as specified. complete all as specified and directed.

S&F GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F in Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140 mm complete all as specified and directed

S&F in repairs 15mm brass chromium plated bib cock with wall flange complete all as specified and directed. Make - Jaquar (Cat No- 5041) or equivalent as per make list in PS

S&F in repair angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe complete all as specified and directed

M&L for 18 -20mm thick BLACK/RED(LAKHA) granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall,window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L cement concrete 1:2:4, type B0(12.5mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angle and throating complete all as specified and directed

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L rendering 15 mm thick in cement mortar 1:6 on wall of brick work of concrete surface, finished fair and even complete all as specifed and directed

M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed

M/L for applying two coats of oil bound distemper over 1.5mm thick putty and over one coat primer on newly plastered surfaces of wall complete all as specified and directed

M/L for applying two coats of oil bound distemper over 1.5mm thick putty on wall surface surfaces after complete removal of existing treatment complete all as specified and directed

M&L for complete removal of existing treatment of wall by mechanical complete all as specified and directed

M & L for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed

M&L for applying 1.5mm thick wall care putty water proof making smooth surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises complete all as specified and directed

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in loors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for light shade, vitrified tiles, 8 to10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed.

M&L for light shade, vitrified tiles, 8 to 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350X250X7mm/450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L in repair machine cut kota stone slab flooring 16-20 mm thick over and including 20 mm thick screed bed CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beeswax polishing to receive granite finish complete all as specified and directed

M&L in repair kota stone slab 16-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed

S&F aluminium sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed

S&F in repair 100mm butt hinges, medium weight, cold rolled, mild steel complete all as specified and directed

S&F in repair aluminium anodised tower bolts 150mm long, of extruded section complete all as specified and directed

Supply & fix 150mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed.

S&F framed work such as grill framed guard for fixing arrangement for wire cloth etc complete all as specified and directed

S&F in repair, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed.

M&L for chequered cement concrete colour tiles size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified and directed

M & L for PCC ( 1 : 4 : 8 ) Type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed

S&F 2mm thick Fibre glass reinforced translucent plain sheeting with side lap fixed with coach screw and washer in roof, wall etc complete all as specified & directed

M&L in repairs for Endura colour tiles size 300mm cmx300mmx10 to12mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in cm (1:6) complete all as specified and directed

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, sheathed and connected to common earth and earth dolly in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,suitable for modular fixtures including suitable modular box, suitable sunken box 18 gauge,base plate and outer plate including making good to walls, ceiling etc including white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as directed for: One light/fan/exhaust fan/bell point wiring controlled by one, one way switch/bell push button complete all as specified and directed

All as per Srl item No 79 above but one outlet socket point 3 pin 6 amps on independent board complete all as specified and directed

All as per Srl No 79 above but one outlet socket point 3 pin 6 amps on the same board with other switches complete all as specified and directed

All as per item No 79 above but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire for one 16 amps socket outlet on independent board all complete all as specified and directed

All as per item No.79 above but for wiring in existing conduit for One light/fan/bell point wiring controlled by one, one way switch/bell push button complete all as specified and directed

All as per Srl item No 83 here-in-before but one out let socket point 3pin 6 amps on independent board complete all as specified and directed

All as per Srl item No 83 here-in-before on the same board with other switches complete all as specified and directed

All as perSrl item No 83 here-in-before using 2.5 sqmm copper conductor and with 2.5 sqmm earth wire for one 16 amps socket outlet on independent board complete all as specified and directed

All as per Srl item No.3 here-in-before but using 4 sqmm copper conductor for with 4 sqmm earth wire for one 20 amps socket outlet on independent board complete all as specified and directed

S & F Modular Switch, 1 Module, 6A, AC, 240V, one way ISI Marked and complete all as specified and directed

S & F Modular Switch, 1 Module, 16A, AC, 240V, one way ISI Marked and complete all as specified and directed

S & F Modular Bell Push, 1 Module, 6A, AC, 240V, one way ISI Marked and as specified.

S & F Modular Step Fan Regulator, 2 Module, 120W, AC, 240V, one way ISI Marked and complete all as specified and directed

S & F Modular Socket, 2 Module, 6A, 2/3 pin combined, AC, 240V, one way ISI Marked and complete all as specified and directed.

S & F Modular Socket, 2 Module, 6A / 16A, 2/3 pin combined, AC, 240V, one way ISI Marked and complete all as specified and directed

S & F Modular Power Switch and Socket Unit with factory made poly carbonate modular box, 20A, 3Pin, AC, 240V incl 20A MCB SP and Plug Top ISI Marked complete all as specified and directed

S & F lamp holder, PVC / Polycarbonate type with batten back plate, AC, 240V, Pin type, ISI marked complete all as specified and directed

S & F Ceiling rose surface Bakelite 65x50mm, 3 terminals, AC, 240V, ISI Marked complete all as specified and directed

S & F Call Bell, AC, 240V, SP, ISI Marked complete all as specified and directed

S&F in repairs LED Recess mounted, ceiling pannel, 2'x2' , 36 watts, 240V light fitting with heat exchanger unit complete all as specified and directed.

S & F Wall mounting fancy light fitting with polycarbonate diffuser prewired incl 9 Watts LED lamp complete all as specified and directed

S & F die-cast alluminium housing 6/7 Watt LED concealed / surface mounting down light luminaire in circular shape complete all as specified and directed.

S & F die-cast alluminium housing 10/12 Watt LED concealed / surface mounting down light luminaire in circular shape complete all as specified and directed.

S & F integrated LED tube light fitting surface mounting, poly carbonate batten type, 4' , 240V, T5, 20 watt with warm white/ white tube complete all as specified and directed

S & F Post Top Lantern with acrylic dome suitable for and incl B22 LED lamp 30 Watts complete all as specified and directed.

S & F Garden light with acrylic dome suitable for and incl B22 LED lamp 10 / 12 Watts complete all as specified and directed.

S & F 35W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed by Engr-in-Charge.

S & F in repairs integrated LED tube light fitting surface mounting, Poly carbonate batten,2', 240V, T5, 9/10 Watt complete all as specified and directed

S&F Photo light fitting of 5 to 10 W complete all as specified and directed

S&F Bed side lamp type light fitting of 3 Watt complete all as specified and directed

S & F in repair Metallic Enclosure, SPN DB, 240V, AC, 8 way, double door with 200Amps rated busbar ISI Marked and complete all as specified and directed.

All as per item no 109 above but 12 way with 200Amps rated busbar complete all as specified and directed

All as per item no.109 above but TPN DB, incomer MCCB type, 415V, 4way with 160Amps rated busbar, double door complete all as specified and directed

S/F in repair MCB SP 6 to 32 A, AC, 240V, 10KA 'C ' curve ISI Marked complete all as specified and directed

S/F in repair Isolator DP, 40A, AC, 240V, ISI Marked complete all as specified and directed

S/F in repairs, 4 Pole MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity 16KA with Thermal - Magnetic Release ISI Marked complete all as specified and directed

S&F SPN enclosure with 2 pin earth plug socket complete with one MCB 20Amps complete all as specified and directed

S & F Wall mounting fan AC single phase 230V of size 300mm sweep complete all as specified and directed

S & F Exhaust fan steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed

S & F fan ceiling complete with blades, down rods, electronic regualtor and accessories ,230V, 1200 mm sweep. BEE Five Star rated with Brushless direct current motor (BLDC) complete all as specified and directed

S & F Electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed

M & L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable FRLS with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid PVC conduit concealed of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including taking down old u/s wiring & incl all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

All as per Item No 120 above but with 2 runs of 4sqmm + 1 Run 4sqmm earth wire complete all as specified & directed.

M & L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

M&L for trial bore of 200 mm dia pilot bore upto 200 mtr depth below ground level in any type of soil strata including hard stone/ boulder etc complete all as specified and directed. Development of trial bore by reaming in following steps:- (a) From 200mm to 350mm (b) From 350mm to 450mm (c) From 450mm to 550mm Note: Required material and T&P for boring shall be deemed included in the rate quoted by the contractor

Material and labour for PVC slotted pipe of 200 mm dia, 5mm thick in lieu of casing pipe of 200mm dia complete all as specified and directed

Material and labour for PVC casing pipe of 200 mm dia, 5mm thick including jointing material complete all as specified and directed by Engr-in-charge.

Supply and fixing, connecting and testing of non return valves 80mm dia ISI market, as per IS 5312 both ends fianged GI body with check nuts including jointing materials complete all as specified and directed by Engr-in-charge.

M&L MS cage of suitable size for submersible pump set fabricating out of MS flat 40 x 10 mm. 4 Nos vertical and 4 nos horizontal supports as in frame work to hold the submersible pump set alongwith column pipes safely including applying of two coats of synthetic enamel paint over priming coat of red oxide after preparation of new steel surfaces etc complete all as specified and directed

Yield test for the bore well by continously pumping for 16 hours to determine safe pumping yield complete all as specified and directed.

S&F of pressure gauge 0 to 10 Kg/ Sqaure cm range with necessary siphon and 15mm dia stop valve including 15mm dia GI pipe not exceeding 0.25 mtr in length, 15 mm brass bib cock on rising main inclduing drilling tapping on GI/CI pipe line complete all as specified and directed.

S&F flanged column pipe 80 mm dia bore with suitable gasket, nut, bolt and washer of GI steel water tubes, heavy grade galvanised with all fittings complete all as specifeid and as directed.

S & F, install, testing and commissioning multi stage submersible pump and connected with 80mm dia column pipe and 10 Sqmm copper conductor submersible cable having diffuser casing construction and impellers dynamically balanced rotor and pump shaft with impeller with outlet size 80mm having 30 mtr head and discharging capacity not less than 1300 LPM including disc. suction strainer cable guard etc and coupled with suitable motor suitable for operation on 3 phase 415 volts including lowering into bore well etc complete all as specified and directed. Note: Required material and T&P for erection of submersible pumping set shall be deemed included in the rate quoted by the contractor.

Supply and laying XLPE insulated, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade laid in trenches/ fixed in wall/ pole of cross sectional area of cable 35 Sqmm, 4 core complete all as specified and as directed.

S & F PVC insulated and PVC sheathed multi stranded copper conductor, cable for submersible pump set, ISI marked, confirming to IS-864 of size 3 core 10 Sqmm, 1100 volts grade, including necessary water proof connection to submersible pump at cable lead complete all as specifeid and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5M below ground level, connecting to the Galvanised iron strip 25 x 4mm by means of nuts, bolts, check nuts and washer etc of galvanised iron earth lead protected by provision of GI pipe light grade 40 mm bore from earth electrode to Panel board/ DB's incl. provn of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (Weight not less than 4 kg/ Sqm) and frame of angle Iron 25 x 25x 6mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI pipe light grade 20mm bore dia pipe for watering arrangementperforated at bottom 1.75M long placed on top edge of earth plate, commom salt and charcoal filling test point made out of bronz/ Gun metal with fixing arrangement, funnel, wire mess and earth wowrk in hard/ dense soil, returning in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electrical plate No- 5 of SSR part -I and connection to earth test point complete all as specifeid and as directed. NOTE: Item of Earthing incldues cost of 7.5M long galvanised iron earth lead 25 x 4mm size and protection pipe of 40 mm bore GI pipe light grade.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil and leveling of bottom surface to required level complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ loose soil complete all as specified and as directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

M&L for laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick designation 7.5 kg cm2, laid dry over under ground cable for protection complete all as specified and as directed.

M&L for Galvanized steel tubing 40mm bore dia, light grade, with all fittings for protection of cable with MS clamp, bolt, nuts and washer complete all as specified and as directed.

H.B. Traders

GARG CONSTRUCTION CO