Construction work of fountains in Rajputana, Shiv Park, Nilkanth Mahadev Temple, Narayan Park, Kadam Park in Ward No. 26 of Vidyadhar Nagar Zone.

(4.10.1) Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m

(21.1.7) Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:4:8 (1 Cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size).

(24.1.1) Brick work with FPS bricks of class designation 75 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

(23.1.2) Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

(32.3.2) Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:4(1 cement : 4 fine/ coarse sand)

(34.17.4) Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

(34.10.6) Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall50 mm dia. nominal bore metre

(32.33.1) Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm).

(27.2.1.2) Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.1501 Cm2 to 3600 Cm2 Tiles

(27.3.2) Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in Charge.Granite Work

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (PART-B) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) (NON BSR)

NUMBER #

(1.1)Designing, supply erection, commissioning and testing of 11 mtr. Dia with 80 mm pipes Dome fountain manufactured by ISO 9001:2015 certified company Family Fountains/ Premier/Ripples make inclusive of 151 nos. fountain nozzles with 1/2" aluminium angular bend each fully adjustable for a precision effect. The manifold should be made of MS with. The pipe should be made of Galvanize Iron with flanges, Nut bolts, Gaskets, pipe work, manifold nozzles made of precision machined & including all final epoxy finishing work of pipe surface etc. as per direction of engineer-in-charge. Material of construction of various components Manifold: steel-Epoxy coated Control Valve: Brass/Gunmetal of ISI marked Pipe work: Galvanised iron of ‘B’ Class with epoxy coating on all surface. Nozzle: Ball Joints nozzles of Engineering Plastic with aluminium bend Mounting Stand: fabricated steel-galvanized /epoxy coating

(2.1)Provding and fixing of FRP Fairy Statue Live Size made of Fibre rainforced plastic with natural colours of Fairy Statue 1 nos and heights of 12 fit . as per direction of architect/ engineer in charge.

(3.1)SITC of IP 65 protected LED underwater lighting system manufactured by ISO 9001:2008 certified company with di cast housing 55 watt , 220 V AC LED lamps with dynamic color changing capability avilable in quick connecting cable courpled with various mounting accessories, Ability to create 16.7 million uniform, smooth and brilliant colors with out revealing any lamp image. Gland Shall be IP68, including connections with 2.5 sq mm. copper conductor cable etc. as reqd. Luminaries shall have stainless steel AISI 304 top Ring with chrome plated and housing and totally protected by fused epoxy polyester coating on all surfaces. The wall thickness of Luminaries not less than 5 mm. All external nuts bolt and studs of AISI 304 standard stainless steel with high quality elastomer gasket and a aclric glass. Waterproof luminaries shall be waterproof when fully immersed in water per rating IP 65 .

(3.2)SITC of IP 68 protected LED underwater lighting system manufactured by ISO 9001:2015 certified company Ripples/Premier / Family Fountains make with di cast housing 9x 3W, 12V DC LED lamps with dynamic color changing capability avilable in quick connecting cable courpled with various mounting accessories, Ability to create 16.7 million uniform, smooth and brilliant colors with out revealing any lamp image. Gland Shall be IP68, including connections with 2.5 sq mm. copper conductor cable etc. as reqd. Luminaries shall have stainless steel AISI 304 top Ring with chrome plated and housing and totally protected by fused epoxy polyester coating on all surfaces. The wall thickness of Luminaries not less than 5 mm. All external nuts bolt and studs of AISI 304 standard stainless steel with high quality elastomer gasket and a aclric glass. Waterproof luminaries shall be waterproof when fully immersed in water per rating IP68 and shall have been tested and certified as such by a Govt. of India Test Laboratory.

(4.1)Designing, supply erection, commissioning and testing of 10 HP Monoblock submersible pump of Kirlosker make AC Three phase 380/440 Volt, 50 cycle, supply with foundation bolt, suction stainless steel mesh cover. as per instruction of engineer in charge.

(5.1)Supply of Electric panel for 2x10HP panel comprises of a sheet metal enclosure with hinged front door, back-wall mounting type with provision for incoming & outgoing cable entry, main MCCB, overload relays, contactors, overload tripping etc. L&T/ Schneider make, start stop push button switch & indication lamps etc. complete with internal wiring Lighting system shall be connected by a separate switch and fuse but shall not be energized unless pumps are first switched on. Electric panels protected against dust and jets of water per rating IP-55 Tested and certified by Govt. of india Test Lab. Electrical panel will be at a distance of as per site condition duly tested.Supply and fixing of 7.5HP panel box for above pumps of steel sheet enclosure with front door stand mounting Hut type outdoor panel with detachable bottom plate with provision for incoming & outgoing cable, red oxide under coat and paint finish. Panel comprising 1 No main incoming 2 pole MCB, three nos. back up HRC fuse for pump circuit, Contactors unit with overload relay, start stop push button switch Contactors unit with overload relay, all accessories must be or Cat. I duly tested. as per instruction of engineer in charge

(6.1)Providing and fixing of Proclain mosaic tiles of 50mmX50mmX8mm size manufactured by Cefino, Coral or Pearls and equapproved shade & design with required adhesive over bad of 15 mm thick cement sand mortar 1:3 inclusive nicely finished joints (thickness of joints shall not be more than 1.5 mm) using water proof joints filter (as recommended by manufacturer) & finished with flush pointing in white cement mixed with pigment to match the shade of tiles etc. complete as directed by Engineer In Charge.

(7.1)Designing, supply erection, commissioning and testing of programmable colour changing system with 6 station changing option manufactured by ISO 9001:2015 certified company Philips/Family Fountains make.

(7.2)Supply and fixing of control voltage driver (CVD) for LED lights (12 volt) Premier/Family Fountain make complete as required.

(8.1)SITC of flexible cables for lights 1.5sqmm 4core. Make finolex/ polycab.

(8.2)SITC of flexible cables for Pump 4sqmm 3core. Make finolex/ polycab.

Supply and fixing of 10W speaker AHUJA make complete as required.

Supply and fixing of 50w Amplifiers Ahuja make complete as required.

Providing & Fixing of FRP Garden gazebo having require area 12*12feet thr FRP Roof total area 12*12 feet,total pcs of roof is 6 nos, thickness of roof 2-3 mm & total frame 6 nos.cast iron heavy railing per pcs area 27*14 feet,total railing 3 nos, total frame area 69*29 inch and frame 2*1 inch pipe welded by 12 mm sariya. ombale railing per pcs area 14*18 inch, total railing 6 no, total frame area 69*10 inch, frame 2*1 inch, SQ(IPE WELDED SARIYA), 12 mm thickness of ms plate used in GAZEBO, FRP POLE Area 6*9 inch, 3ft height, thickness 2-3 mm, total poles no. is 6. all equipments should be paint by 2 layer of P.U. paint in multicolour or oven baked powder coated which ever is fesible and possible. All work and joint of pipe, nut should be in proper joint and finishing. All work should be done in engg. incharge.

Providing & fixing MPS of size area 20*16*12 feet, main frame manuafctuered with 75 mm OD pipe b class make tata company pipe31 and 25 mm OD pipe used, all slide are roto lidpe sllde are used, all nut bolts are galvanised. one sprial slide with safety gate (ph:5ft) ONE FRP wave slide saftey gate 10 feet, one window grill, one FRP staircase for better gripping and durability. All equipments should be paint by 2 layre of P.U. paint in multicolour or oven baked powder coated which ever is feasible and possible.All work and joint of pipe, nut should be in proper joint and finishing. All work should be done in engg. incharge.

Providing and Fixing ROTO MPS of size area 26*20*17 feet, main frame manufactured with 75 mm OD pipe b class make TATA company pipe 31&25 mm OD pipe used,all slide are roto lidpe sllde are used, all nut bolts are galvanised. one towet used 14 feet height, one hexagonal tower (ph:5ft) with square and hexagonal decks. one roto lldpe premium spider shape canopy, one small roto lldpe butterfly canopy, one roto lldpe minion canopy, one roto llpde flower canopy, one roto lldpe spiral tube slide with safety gate (ph:5feet), one roto lldpe premium multicolour slide (PH:7feet), one roto lldpe multicolour straight slide with safety gate (PH:7feet), one roto abacus gril, one giraffic grills, two window grills, one lldpe sitting bench, two FRP staircase for better gripping and durability.All equipments should be paint by 2 layre of P.U. paint in multicolour or oven baked powder coated which ever is feasible and possible.All work and joint of pipe, nut should be in proper joint and finishing. All work should be done in engg. incharge.

Please Enable Macros to View BoQ information