Electrification of Proposed shed for Development of Bamboo composite beams at AMPRI, Bhopal

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box/celling rose and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group 'C'.

Wiring for circuit / submain wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required

a) 2 X 1.5 Sq.mm + 1 X 1.5 Sq.mm earth wire.

b) 2 X 2.5 Sq.mm + 1 X 2.5 Sq.mm earth wire.

c) 2 X 4 Sq.mm + 1 X 4 Sq.mm earth wire.

d) 2 X 6 Sq.mm + 1 X 6 Sq.mm earth wire..

e) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

f) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 15 / 16 & 5 / 6 amps modular socket outlet and 15 / 16 amps modular switch, connection, painting etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

12 way double Door

Supplying & Fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" Curve including connections, painting etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps 'c' series, SP, MCB, in sheet steel enclosure, on surface or in recess with chanined metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface/Wall or in recess with G.I. nut,bolt, spring, washer connections etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240 volts 'C' series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single Pole

b) Single Pole and Neutral

c) Triplae pole with neutral

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required

a) 3 1/2 x 70 sq.mm

b) 3 1/2 x 95 sq.mm

c) 3 1/2 x 120 sq.mm

d) 3 1/2 x 240 sq.mm

Supplying and fixing follwing modular Switch/Socket on the exixting modular plate & switch box including connections excluding moddular plate etc as required.

a) 5/6amps switch

b) 3 pin 5/6 Amps Socket outlet

c) 15/16 A switch

d) 6 pin 15/16 A socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make - BEC/Kissan/Kasta/ Supreme/ Sudhakar/ Reliance)

Supplying and fixing of following sizes of steel conduit alongwith accessories in surface/recess including painting in case ofsurface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following ways surface/ recessmounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required .

a) 4 Way (4+12), double door,

Supplyiong and Fixing following size/ Modular plate, GI box alongwith modular base & cover plate for modular switchesin recess ets as required

6 module

Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses,connections, earthing etc. as required.

Supplying and Fixing TP sheet steel enclosure on surface/recess along with 32 amps ,415 volt 'C' curve TP MCB complete with Connection ,testing and commissioning etc as required

Supplying & laying at site XLPE Insulated PVC Sheathed steel Armoured under ground Electric cable with aluminium conductor for working voltage upto and including 1100 Volts to IS:7098 (Part-1) or IS:1554 (Part-I) with latest amendment as applicable of size 3 1/2 x 35 sqmm (make :Finolex /CCI/Polycab/ RR kable)

Supplying & laying at site XLPE Insulated PVC Sheathed steel Armoured under ground Electric cable with aluminium conductor for working voltage upto and including 1100 Volts to IS:7098 (Part-1) or IS:1554 (Part-I) with latest amendment as applicable of size 3 1/2 x 70 sqmm (make :Finolex /CCI/Polycab/ RR kable)

Supplying, installation, testing & commissioning and Replacement ( dismelting and dissconnect all existing supply of the old panel and reconnected with new panel) of old outdoor panel with Outdoor type double door MV feeder pillar, having in-built locking arrangment, suitable for 415 V, 3 Phase, 50 Hz AC supply system having front surface area not less than 1.5 sq.mtr. fabricated from CRCA sheet steel of 2 mm thick for frame work, covers & doors, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 630 Amp capacity extensible type TPN Aluminium Alloy bus bars of high conductivity, DMC/SMC bus bar supports, with short circuit with stand capacity of 31 MVA for 1 Sec, bottom base a size of MS section not less than 50mm x 50mm x 5 mm thick, alongwith 1.0 Mtr. long legs of same size entire panel shall have a common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, having solid connections from main bus bar to switch gears with required size of Aluminium Bus bar and control wiring with suitable size FRLS PVC insulated copper conductor Single core cable for votlage & current respectively, cable alleys, cable gland plates i/c providing following switch gears : (The depth of LT Panel shall not be less than 300 mm.), complete as per CPWD specification. (The board shall be dust & vermin proof free standing type Mounted on base channel of MS section.Installation with brick foundation pedestal of suitable size)

A (Incoming)-a) 400 Amp, 4 Pole, MCCB, having breaking capacity 36 kA, thermal and Magnetic release, with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle. - 1 No. b) 3 Nos.(R-Y-B) Phase indication LED lamps with protection MCB/fuses - 1 Set, c) Multi-function metre (MFM) with to read V, I, Hz, PF, KW & KWH complete with 3 Nos. resin cast CTs of 400/5 Amp, class 1.0 accuracy and 15 VA burden, with control wiring - 1 Set. (d) Danger Plate shall be 150 mm X 100 mm of mild steel - 1 No. B) Bus Bar - Electrolytic high conductivity TPN aluminium bus bars of minimum of 400 Amps capacity suitable for 415 V, 3Phase, 50 Hz AC supply-100% neutral with heat shrinkable coloured sleeves and i/c DMC/SMC bus bare cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec. C) Out going - a) 250 Amp, 4 Pole, MCCB, having breaking capacity 36 kA, Thermal and magnetic release with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle.- 3 Nos. b) 160 Amp, 4 Pole, MCCB, having breaking capacity 25 kA, Thermal and magnetic release with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle.- 2 Nos. c) 100 Amp, 4 Pole, MCCB, having breaking capacity 25 kA, Thermal and magnetic release with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle.- 2 Nos.

Supplying, installation, testing and commissioning of Air circulautor fan 450mm sweep min 1350 RPM , 100 CMM at the wall ,thermal overload protection for long lasting motor, royale finish and smooth oscillation (similar to Crompton make model SStorm2 ) including all accessories,connection complete as required.(Make : Usha /Havells/ Crompton/Khatain)

Supplying,installation,testing and commissioning of prewired LED compact light fitting of following type complete with all accessories etc. recess/surface/panel/flase ceiling i/c connection with 3 x 1.5 sq. mm FRLS PVC insulated copper conductor wire earthing etc. as reqd.

a) LED BETTEN fittings surface/wall mounted in 4 feet length, 20 W ,6500K , decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, envoirmental friendly energy efficient suitable i/c connection with 1.5 sq. mm FRLS PVC insulated, copper conductor , single core cable & earthing complete etc. as reqd.

Supply and installation of Mid way light having minimum 40 watt Envoimental friendly , energy saving long life corresion resistance mounting in tracess/recesses/ surface with having IP65 LED light.

Supplying installation testing & commissioning of 60-80 watt integral LED flood light fitting with driver inside a PDC Housing, IP 66 based energy saving envoirmetal friendy highly efficient, reliable with Driver & all accessories i/c connection complete etc. as required.

Supplying installation, testing and commissioning of 3 pole 160Amp MCCB 25 KA, in existing panel including interconnection etc.as required (make legrand/hager /semans/L& T)

Supplying and fixing following rating, four pole, 415 V, isolatorin the existing MCB Disgtribution board complete with connections, testing andcommissioning etc. as required

Supplying installation, testing and commissioning of 3 pole 63 Amp C Curve MCB 16 KA, in existing panel including interconnection etc.as required ( (make legrand/hager /semans/L& T)

SUPRABHA TECHNICAL SERVICES

ALASKA ELECTRICALS