Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 CrAccepted-AOC | ₹15.8 Cr Quoted ₹16.1 Cr | L1 | Accepted-AOC BOND SIGNED |
| 2 | L2₹16.2 CrRejected-Finance | ₹16.2 Cr | L2 | Rejected-Finance Rejected |
Tender Value
₹16.4 Cr
EMD Value
₹30 L
Closing Date
26 Mar 2020, 12:00 pmClosed
Superintending Engineer
Pratapgarh Circle, PWD, Pratapgarh
Under State Road Fund Widening and Strengthening of Patti to Aspur deosara Block in District Pratapgarh
2020_CEALD_450564_1
1166/93C/etendering/P.F.C/2020 Dt 06.3.2020(1)
Open Tender
Civil Works
365 days
PRATAPGARH
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,714
Exn. Engg.Provincial Division, PWD, PRATAPGARH
₹30 L
Pratapgarh Circle, PWD, Pratapgarh
27 May 2020
18 Mar 2020
26 Mar 2020
18 Mar 2020
26 Mar 2020
18 Mar 2020
24 Mar 2020
Construction of embankment with approved material obtained from ROW with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. as per MoRTH clause 3.16 & 305
Earthwork for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading of tippers trimming bottom and side slopes in accordence with requirements of lines grades and cross sections nad transporting to the embankment location within all lifts and lead upto 1000 m
Construction of granular sub-base by providing coarse graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401
Providing, laying, spreading and compacting graded approved quarry stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver. complete as per clause 406
Providing, laying and spreading and compacting graded stone aggregate to wet mix macadem specification inculding Premixing the matreial with water at O.M.C. with 1% cement (OPC) and 3.5% bitumen emulsion (SS-2) in mechnical mix palnt (pag mil) carriage of mixed material by tipper to site. Laying in uniform layer in sub base/base coarse on well prepared sub base and compacting smooth wheel roller of 80-100 KM To achive desired density including, lighting barricating and maintence and diversion as table no. 400.11/ 400.12 and technical specification no. 406
Providing and applying tack coat with bitumen VG-10 grade using pressure distributor at the rate of 0.30 kg per sqm (dry and huge surface) on the prepared surface cleaned with mechanical broom completely including the cost of all labour, T&P. As per MoRT&h no 503
Providing and laying bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508
Earth in excavation in ordinery soil for foundation and tranchage lead up to 30M. And lift upto 1.5M.
Providing and Laying 40mm. Guage ballast with stone dust Complete as in foundation
Cement concrete 10:5:1 with 40 mm brick ballast fine sand & cement.
Supply and Laying of 1000 mm dia H.P. NP3 Including cartage upto site laying with coller joint filling in cement mortor with Jute, labour T&P etc.
Supply and Laying of 600 mm dia H.P. NP3 Including cartage upto site laying with coller joint filling in cement mortor with Jute, labour T&P etc.
Supply and Laying of 350 mm dia H.P. NP3 Including cartage upto site laying with coller joint filling in cement mortor with Jute, labour T&P etc.
Class 150 Brick in 1:4 cement and fine sand mortor
Cement Pointing on brick works with 1:2 cement & sand mortor with fine sand
Plaster over Brick work 20mm thick making coping plate on both side in 1:4 cement & fine sand mortor.
Excavation in foundation in ordinary soil (Loam clay, or sand ) including lift upto 1.5 m & lift up to 30.0 Mtr & including filling,watering and ramming ofexcavated earth in to the trenches or in to the space between the building and the sides of foundataion trenches or in to the plinth and removal & disposal of surplus earth as directed by the Engineer- In-Charge up to a distance of 30.0 Mtr from the foundation trenches .
Concrete in foundation with 4 cm. (1½") gauge approved stone ballast,approved coarse sand and cement in proportion of 1:3:6 including supply of all materials, labour and T&P etc. required for proper completion of the work.
First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials,labour and t&p etc required for proper completion of the work.
Reinforced Cement Concrete work with cement,approved coarse sand and 2 cm. gauge approved stone ballast in proportion of 1:1.5:3 in slabs excluding supply of reinforcement and its bending but including its fixing bending the same with 24 B.W.G.G.I.binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work.Binding wire cost being included in the item.
Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks
Struck pointing with cement mortar consisting of one part cement & two parts of fine sand of 1.25 F.M. including supply of all material,labour and T&P etc required for proper completion of the work.
J.P.ENTERPRISES
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid