Repairs/replacement of various types of shed under AGE(I) (U) B/R Delhi Cantt-10.

Amount

Dismantling AC sheeting, CGI sheet, galvalume sheet or roof covering sheet of any description, in any position & any pattern roof coverings.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed.

M&L for PCC type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S&F of pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws with bent to a curve (of any radius as per required) complete all as specified and directed by Engr-in-Charge.

S&F of pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws with bent to a curve (of any radius as per required) complete all as specified and directed by Engr-in-Charge.

S&F of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and directed.

S&F of Fe-290 (Gde-E-165) rolled roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of new surfaces complete all as specified.

M&L for two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description n exc. 10 cm in width or girth incl preparation of new surfaces complete all as specified.

Demolition of brick masonry work built in cement mortar or cement lime mortar complete.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar(1:6) complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L for 10mm thick rendering plaster in cement mortar(1:6) on brickwork or concrete surface of wall (Internal Surfaces) finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for two coats of oil bound distemper including preparation of new plastered internal surfaces of wall over one coat of wall care putty (not less than 1mm thick) complete all as specified and directed.

M&L for preparation of new plastered external surface of walls, pillars, cornices, chajja, facia, dropwall, parapet, roof projection and applying two coats of weather proofing coats of 100% Premium acrylic emulsion exterior paint with Graco 490 spray machine, having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqm including applying 1mm thick external wall care putty over disturbed surface during preparation or any reason with sanding for smooth surface, Allow 6-8 hrs to dry the surface for painting of subsequent coats etc. all work, complete all as specified and as directed.

Dismantling stone slabs or tiles of any description or thickness in floor complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 1500 Mtr and away from MoD land to low lying areas complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base .

M&L for machine pressed precast concrete interlocking paver block with glossy finish of any size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade fixed with grey cement and no pigment including 50mm thick sand cushioning complete all as specified and directed by Eng-in-Charge.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded agg) in kerbs , rounded or chamfered on edges including necessary form work complete all as specified and directed.

RIZCON (BID ID -3108303)

M/S GEETANJALI ENTERPRISES (BID ID -3106029)

M/S GR construction compony (BID ID -3104821)

HIRA SINGH AND SONS (BID ID -3107091)

B. S BUILDERS (BID ID -3106873)