Day to day erection and dismantling of 220 V OH line at 06 no. departmental patch for providing lighting power for proper lighting for operation of shovel for a period of 270 days wrt AADOCM, Dhori Area

Amount

Dismantling of pole/street light standard/strut embedded in cement concrete foundation etc. as required.

Dismantling of overhead lines comprising of copper/aluminium overhead conductor, G.I. wire cross arms, insulators etc. as required

Transporting of pole from transport/site to site

Erection of steel pole tubular or rail pole strut concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and re-filling and secured with holding clamps, bolts, nuts, etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia x 1.8 metres long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20 mm x 60 cm), 7/3.15 mm dia G.I. stay wire and strain wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 diameter and above including binding etc. as required

Supplying and erection of 100 mm x 80 mm pin insulator complete with G.I. spindle and nuts etc. as required 220V grade

Supplying and erection of galvanised ‘D’ iron clamps complete with shackle insulator (100 mm x 110 mm), G.I. bolts, nuts and washers, coach screw etc. as required 220V grade

Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long with charcoal/ coke and salt as required. For Transformer

Providing and fixing 25 mm x 5 mm dia G.I. strip on surface or in recess for connections etc. as required.

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with and finished paint as required.

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.

Erection of angle iron/channel iron cross arm on steel tubular etc. as required.

Fitting of light on top of the pole.

Dismantling of light from pole.

G.I. wire 8 SWG

Erection of cradle guard as required

Supplying and drawing following sizes FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. : 1x1.5 sq.mm (for light connection)

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size is in the existing masonry open duct as required. Upto 35 sq.mm. for lighting tower

Providing and fixing 200 Amp. Fuse disconnector switch unit.

Providing and fixing 100 Amp. Fuse disconnector switch unit.

Dismantling of 50/100 KVA transformer with all connection (HT/LT)

Installation of 50/100 KVA transformer with all connection (HT/LT) and testing

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works. Two coats

Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Total impact of GST for the purpose of CTC

M/S UPENDRA ELECTRICAL

M/S KUMAR ENTERPRISES