ADDITION/ ALTERATION AND SPECIAL REPAIRS OF OFFICE SPACES OF BUILDING NO T 32 AT INS CHILKA UNDER GE CHILKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick squares/rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm, in floors etc. including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc. Including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match in vertical surfaces such as skirting / dado tiles fixed over and including 10 mm thick backing coat in cement mortor 1:4 complete all as specified and directed.

M&L for Marble "white/green" work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types fixed over and including 15 mm thick screed bed in CM 1:4 including mirror polishing on marble work where ever required to give high gloss finishcomplete all as specified and as directed.

M&L for 20 mm thick Granite stone in steps, jambs, pillars, window cills, cooking platform, office counter set over 15 mm thick screed in CM (1:4) complete all as specified and as directed etc. fixed over and including cement morter (1:4) including pointing in white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite including mirror polishing on marble work where ever required to give high gloss finishcomplete all as specified and as directed.

M&L for RCC type B1 1:2:4 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto all as per above item but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Demolition of brick work/stone masonry built in cement mortar and removal of rubbish from site complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:4.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames) all as specified.

S&F MS flat iron for hold fasts etc all as specified.

Cutting holes in brick walls/stone wall exceeding half brick but not exceeding one brick in cement mortar for inserting holdfasts and making good dismantled protiion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and as directed.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood panels, commercial type on both sides complete all as specified and as directed

M & L for 18 mm thick plywood, grade BWR type BB fixed with screws to timber frame work as in shutter ,shelves , jambs of door opening complete all as specified and as directed.

M & L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive asper manufacturer's instructions complete all as specified and as directed.

M & L for external teak wood lipping 6mm thick fixed withnails for 18mm thick board complete all as specified and as directed

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing as directed

S&F medium weight, stainless steel butt hinges of 100mm size, complete all as specified and as directed.

S & F 150 mm long Brass handles cast type, polished bright complete all as specified and as directed

S & F 250 mm long Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing boltwith rolled or drawn brass bolts and fixed cast type, polished bright complete all as specified and as directed

S & F 150 mm long Brass barrel towerbolts, with cast or sheet barrel and rolled or cast bolts and fixed, polished bright complete all as specified and as directed

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed.

S&F extruded aluminium alloy handles, 150mm long fabricated type, anodised all as specified and as directed.

S&F floor door stopper 150mm overall length of cover plate of brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and as directed.

S&F Powder coated of any colour aluminum frame (minimum thickness of powdere coating 50 micron) for door/windows/ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified. (Note : glass and paticle board shall be measured seperatly.)

S&F powder coated of any colour(thickness of powder coating not less than 50 micron aluminium sliding window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium anodised fittings including locking arrangement and all accessories commplete all as specified and as directed. (Note : glass shall be measured seperatly.)

S&F anodised powder coated of any colour aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). friction hinges type B-21 100mm long (2 no.) suitable handle (2no.) commplete all as specified and as directed. (Note : glass shall be measured seperatly.)

S&F Aluminium powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed.

S&F 4 mm thickness of sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and as directed. Make : Hindustan,Pilkinton glass works Ltd/Modiguard.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed

M&L for preparation of new painted wooden surfaces of any description not otherwise described over 10 cm width or girth of any and applying two coat of synthetic enamel paint over coat of primer of approved shade complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 110 mm bore.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 75 mm bore.

S&F in repairs 110 bore PVC (SWR) bends with access door any radius complete all as specified and directed

S&F in repairs 110 bore PVC (SWR) bends any radius complete all as specified and directed

S&F in repairs 75 bore PVC (SWR) bends with access door any radius complete all as specified and directed

S&F in repairs 75 bore PVC (SWR) bends any radius complete all as specified and directed

S&F in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed

S&F in repairs 110mm bore PVC (SWR) junction double (double T) equal or unequal complete all as specified and directed

S&F Stack clamps 100 mm pipe out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engr-in-Charge.

S&F in repairs GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings of size 25mm bore complete all as specified & directed.

S&F in repairs GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings of size 15mm bore complete all as specified & directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F in repair gun-metal, globe or gate valves size of 25mm bore of dia, with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified & directed.

S&F in repair PVC floor trap with grating including jointing with solvent cement to waste pipe 75 mm dia

S&F in repairs 102mm dia grating doom of fancy chromium plated complete all as specified and directed(Make : Prayag)

S&F in repair chromium plated fancy type 15 mm dia bore of pipe bib taps , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F chromium plated fancy type 15 mm dia bore of pipe bib taps , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair water closet pedestal vitreous china white pattern (EWC) including white colour seat cover and connection to drain and to flush pipe & mild steel chromium plated or aluminised hinging device etc (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.

S&F water closet pedestal vitreous china white pattern (EWC) including white colour seat cover and connection to drain and to flush pipe & mild steel chromium plated or aluminised hinging device etc (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore dia CP two way bib tap cast copper ally fancy type screwed down high pressure, with long shank screwed and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs CP tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all specified and as directred.

S&F CP tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all specified and as directred.

S&F CP fancy type health faucet with hose & hook for EWC including all necessary fittings complete all as specified and as directed.

S&F in repairs PVC soap tray fixing with screw in the wall as specified and as directed.

S&F in repairs PVC low level flushing cistern of 10 ltr capacity fixed including syphonic action type, ball valve, float and handle including brackets etc complete all as specified and directed

S&F PVC low level flushing cistern of 10 ltr capacity fixed including syphonic action type, ball valve, float and handle including brackets etc complete all as specified and directed

M&L for 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repairs vitreous china urinal bowl flat back of size 465 X 355 X 265mm white with grating,union and waste coupling including fixing plugs, beding urinal against wall in CM 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed

S&F PVC connections 15 mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed

S&F in repairs wash hand basin vitreous china white flat back of size 580 X 450mm with brackets, complete all as specified and as directed.

S&F wash hand basin vitreous china white flat back of size 580 X 450mm with brackets, complete all as specified and as directed.

S&F in repair 15mm bore dia fancy type Pillar taps, cast copper alloy, with or without lettered Hot or cold with capstan heads, chromium plated, crewed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore dia fancy type Pillar taps, cast copper alloy, with or without lettered Hot or cold with capstan heads, chromium plated, crewed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 50mm dia pipe Low density polyet hylene pipes (LDPE) of pressure rating 6 kgf/cm2 as in waste pipe to wash basin /kitchen sink/urinal all as specified and as directed.

S&F 32mm bore PVC waste pipe for WHB, sink complete all as specified and as directed.

S&F angle stop cock 15mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and as directed.

Taking down plaster of any description on brick or stone walls, ceilings, fins, fascias, chajjas, parapets etc. (including tiles) raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6, including finishing even and smooth (without using extra cement) complete all as specified and as directed.

M & L 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete curfaces mixed with water proofing compound 200ml per 50 kg weight of cement rendering finished even and fairn and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately.

M&L for 5 mm thick rendering in CM 1:3 on ceiling including finishing the surfaces even and smooth, without using extra cement etc complete all as specified and directed.

Supply only liquid water proofing compound

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat oil bound distemper over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coat oil bound distemper on ceiling complete all as specified and directed.

M&L for preparation of new plastered external wall surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M&L for complete removal of existing treatment and preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coat oil bound distemper on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of external wall surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm the surface even and smooth complete all as specified and as directed.

M&L for complete removal of existing treatment and preparation old surfaces by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and greasy spots of wall and applying two coat of oil emulsion distemper of approved shade on wall over surfaces plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

Preparation of old steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc .

S&F in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in circular arc shape complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as Sub base of hard standing/pathway complete all as specified and directed

Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed .

M&L Point wiring for one light point or one fan point controlled by one switch with two runs of FRLSH grade PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed stranded copper conductor as for earth continuity wire to be drawn in and including PVC casing & caping ( medium grade) not less than 25 mm width with fittings & fixtures including MS sheet metal switch / terminal box 1.22 mm thick upto (200x300)mm size duly covered with backelite sheet cover 3.00mm thick and continutiy conductor shall be connected to common earth and earth dolly and making good disturbed surface to walls complete all as specified & directed . (Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Casing-N- Caping :-Plaza/Prestoplast/Precision)

-Ditto- all as above item but one 3 pin socket outlet 5 Amps on same board.

-Ditto- all as per above item but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty.

-Ditto- all as per above item but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLSH grade PVC insulated unsheathed stranded Copper conductor and 2.5 Sqmm, FRLSH grade PVC insulated, unsheathed, stranded copper conductor as earth wire.

S&F in repairs Sub main wiring using two runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 10.0 Sqmm and one run of 10.0 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in casing & caping wiring of suitable size and all as specified.Note : Two runs of10.0 Sqmm copper wire,one run of 10.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza, Make of PVC Conduit :-Plaza/Prestoplast/Precision)

-Ditto- all as per above item but four run10.0 sqmm and two run 10.0 sqmm earth wire

-Ditto- all as per above item but two run 6.0 sqmm and one run 6.0 sqmm earth wire

-Ditto- all as per above item but two run 4.0 sqmm and one run 4.0 sqmm earth wire

M&L for point wiring with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 4.0 Sqmm, with PVC insulated unsheathed stranded FRLSH copper conductor cable of size 4.0 Sqmm for earth continuity wire, to be drawn in and including PVC casing & caping ( medium grade) not less than 25 mm , MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for DP switch including all necessary wall cutting and making good disturbed surface all as directed and specified.(Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision)

S&F in replacement Ceiling rose,3 terminal PVC/poly carbonate isolated body. Cat No- EASMCRN-HPL make : HPL/Anchor / Cona.

Supply and fixing in replacement including connection of modular switch one way 6 Amps 1 Module complete all as specified and directed.Cat No-: NSWR1W006 (Make : .HPL/Crabtree/Cona/Havells.

Supply and fixing in replacement including connection of modular switch one way 16 Amps 1 Module complete all as specified and directed.Cat No- NSWR1W016 (Make : .HPL/Crabtree/Cona/Havells)

Supply & fixing in replacement including connection modular socket outlet 2 /3 pin 6 Amps 2 modules complete all as specified and directed.Cat No-NSWRX3P006-HPL (Make : .HPL/Crabtree/Cona/Havells)

Supply & fixing in replacement including connection modular socket outlet 2 /3 pin 6/16 Amps 2 modules complete all as specified and directed.Cat No- NSWRX16 (Make : HPL/Crabtree/Cona/Havells)

Supply and fixing in replacement of Modular Fan regulator,120 wattsCat No- NSWRFR2M. (Make : HPL/Crabtree/Cona/Havells)

Supply and fixing of DP switch with indicater-2M, 32 Amp suitable for Split/ window AC (On Off Switch) all as specified and directed CAT No- NSWRDPWI032 Make-HPL/Siemens/Schneider/L & T)

Supply and fixing in replacement white modular cover plate with frame 1 Module complete all as specified and directed.Cat No- NSWRP1MC (Make : HPL/.Crabtree/Cona)

Supply and fixing in replacement white modular cover plate with frame 2 Module complete all as specified and directed..Cat No- NSWRP2MC (Make : HPL/.Crabtree/Cona/Havells)

Supply and fixing in replacement white modular cover plate with frame 3 Module complete all as specified and directed..Cat No- NSWRP3MC (Make HPL/: .Crabtree/Cona/Havells)

Supply and fixing in replacement white modular cover plate with frame 4 Module complete all as specified and directed. .Cat No- NSWRP4MC (Make : HPL/.Crabtree/Cona/Havells)

Supply and fixing in replacement white modular cover plate with frame 6 Module complete all as specified and directed. Cat No- NSWRP6MC (Make : HPL/.Crabtree/Cona/Havells)

Supply and fixing in replacement modular metal flush box 1/2 Module complete all as specified and directed. Cat No-MSSM2MMBP. Make-HPL/Schneider/L&T.

Supply and fixing in replacement modular metal flush box 3 Module complete all as specified and directed.Cat No-MSSM3MMBP. Make-HPL/Schneider/L&T

Supply and fixing in replacement modular metal flush box 4 Module complete all as specified and directed.Cat No-MSSM4MMBP. Make-HPL/Schneider/L&T

Supply and fixing in replacement modular metal flush box 6 Module complete all as specified and directed.Cat No-MSSM6MMBP. Make-HPL/Schneider/L&T

S&F in repairs MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 4 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. (Make/Model :Cat No:of MDBDD04- (HPL/Legrand/Schneider)

S&F in repairs MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. (Make/Model :Cat No:MDBDD08 of (HPL/Legrand/Schneider)

S&F in repairs MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 12 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. (Make/Model :Cat No:MDBDD12 of(HPL/Legrand/Schneider)

Supply and fixing in replacement of VTPN double door DB 6 Way DD VERT W/O MCCB double door suitable for TP/FP 'G' frame MCCB and fitted with bus bar, neutral links and blanking plate, IP-43 (Make/Model- MDBVDD06160TAB, (HPL/Legrand/Schneider)

S&F in replacement MCCB 4 pole, with fixed thermal & magnetic release of breaking capacity upto 25 kA, 415 Volts, 100 Amps. Cat No-TABBASIX1100C4P, (Make:HPL/Legrand/Schneider)

S&F in repairs MCB, SPN. 40 to 63 Amps rating 240, volt, 'C' series, 10 kA (Make Havells NTDPC63- (HPL/Legrand/Schneider)

S&F MCB in replacement SP, 6-32 Amps, 240 volt, 'C' Series, 10 kA ( Make Havells,Cat No.NTSPC06-32 (HPL/Legrand/Schneider)

S&F MCB in replacement TPN, 63 Amps, 4154 volt, 'C' Series, 10 kA ( Make Havells,Cat No.NTFPC63 (HPL/Legrand/Schneider)

Supply and fixing High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. (Make /Model No:- HLPT81420PC(CW) & HLPLEDT8PC20(CW) of HPL or equivalent)

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete-Make HLPT51810PCGCW of HPL

M&L for Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised Iron Wire of size 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & GI Wire

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified and directed

Taking down the ceiling fan of any sweep of any make by disconnecting electric connection from ceiling rose, for carrying out necessary repair such as replacement of old condensers/ rubber bushes/ bearing/ flexible copper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts, rewinding of burnt coil and replacement of suitable size of cotter/split pin as required,reassembling and re - fixing in original position, commissioning, testing complete all as directed by the Engr-in-Charge. Notes :- (a) Rewinding of fans and spares replaced shall be measured and paid seperately under relevent items of schedule. (b) Rate deemed to be inclusive of new flexible copper wire between ceiling rose to fan connector no extra claim what so ever will be entrained by the department. (c) Beyond economical repaired fans will be deposity at MES store

Taking down the Exhaust fan/wall mounting fan heavy duty of 300/380/ 450 mm sweep by disconnecting from the ceiling rose, carrying out necessay repair such as replacement of capacitor/ bearings/ flexible copper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts, rewinding of burnt coil and replacement of suitable size cotter/split pin as required, reassembling and refixing in original position, fixing of louvers/wire mesh commissioning, testing complete all as specified and directed by Engr-in-Charge. Notes :- (a) Rewinding of Exhaust fans and spares replaced shall be measured and paid seperately under relevent items of schedule. (b) Rate deemed to be inclusive of new flexible copper wire between ceiling rose to fan connector no extra claim what so ever will be entertained by the department.

Supply and fix in repair ceiling fan oil capacitor/condensers 2.5 mfd of approved make complete all as directed by Engineer-in-Charge. MAKE : NICCO/Havells/Universal.

Supply and fix in repair exhaust fan capacitor 4 mfd of approved make complete all as directed by Engineer-in-Charge. MAKE : NICCO/Universal/Havells.

M& L for Rewinding of ceiling fan motor of type 1200 mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete all as specified and directed by Engineer- in -Charge.

Supply and fix in replacement of new ball bearing 6201 / 6202 / 6203 including metal filling, machining if required, complete all as specified. Make : SKF/NBC

Supply and fix in replacement of canopy (upper and lower) to match the ceiling fan of make/model as per site complete all as specified.

Supply and fix in replacement of gun metal bush, suitable for any make and sweep ceiling fan/Exhaust fan complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement of fan clamp with nut & bolt and rubber bush suitable for ceiling fan of any sweep and make, complete all as specified.

M&L for spray painting with white synthetic enameled paint after preparation of old surface of the ceiling fan of any make/model/sweep, including filling cavities with filler after cleaning dust complete including writting MES number all as specified and as directed. Make : Berger/Asian/ Jenson & Nocholson

-Ditto- all as per above item but for Exhaust fan of 380 mm sweep of any make and painted with grey colour.

SAHADEV PALAI (BID ID -3369162)

ANIL KUMAR BISWAL (BID ID -3372839)