Loading…
Loading…
Tender Value
₹5.5 Cr
EMD Value
₹11.0 L
Closing Date
21 Sept 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
RCF HQ
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.(See detail in tender document)
Definition of Similar work:- "Any civil engineering work other than track work."
7 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All credential documents submitted through DSC i.e. all document received in E-tenders , will be treated as self attested by tenderer & considered valid for evaluation and there will be no compulsion of manual attestation.
Provision of floor tiles (550 No. Qtrs.) & renovation of toilets/bathroom (400 No. Qtrs) in type-II quarters in main colony at RCF, Kapurthala.
RCF-CE-WA-EOT-29-26-27~RCF
RCF-CE-WA-EOT-29-26-27
Open
Works - General
12 Months
Kapurthala, Punjab
₹0
₹11.0 L
21 Sept 2026
31 Aug 2026
7 Sept 2026
42 items across 2 schedules · ₹9,11,047.4 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 12 | 7,365.15 | 88,381.8 |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 50 | 8,288.35 | 4,14,417.5 |
| 3 | Area of slab over 0.50 sqm | Sqm | 400 | 4,425.35 | 17,70,140 |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 10000 | 1,063.45 | 1,06,34,500 |
| 5 | 30 mm thick shutters | Sqm | 340 | 2,333.5 | 7,93,390 |
| 6 | 100x10 mm | Each | 1600 | 39.1 | 62,560 |
| 7 | 100 mm | Each | 800 | 28.25 | 22,600 |
| 8 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 4000 | 408.25 | 16,33,000 |
| 9 | 30 mm thick plain PVC door shutters | Sqm | 1000 | 2,455.1 | 24,55,100 |
| 10 | Fixing with adjustable lugs with split end tail to each jamb | Metre | 1800 | 511.4 | 9,20,520 |
| 11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 1000 | 935.6 | 9,35,600 |
| 12 | Size of Tile 600 x 600 mm | Sqm | 21200 | 1,286.6 | 2,72,75,920 |
| 13 | Size of Tile 600x600 mm | Sqm | 2550 | 1,466.5 | 37,39,575 |
| 14 | One or more coats on old work | Sqm | 280 | 50.6 | 14,168 |
| 15 | Orissa pattern W.C Pan of size 580x440 mm | Each | 100 | 3,850.65 | 3,85,065 |
| 16 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 10 | 2,007.1 | 20,071 |
| 17 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 400 | 219.75 | 87,900 |
| 18 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 9750 | 45.05 | 4,39,237.5 |
| 19 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 15 | 219.35 | 3,290.25 |
| 20 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 300 | 5,540.55 | 16,62,165 |
| 21 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | Each | 400 | 1,404 | 5,61,600 |
| 22 | 610x460 mm bowl depth 200 mm | Each | 300 | 3,337.85 | 10,01,355 |
| 23 | 10 litre capacity - White | Each | 100 | 1,023.05 | 1,02,305 |
| 24 | 32 mm dia | Each | 400 | 104.35 | 41,740 |
| 25 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | Each | 400 | 204.7 | 81,880 |
| 26 | PN - 16 Pipe, 25mm OD (SDR-7.4) | Metre | 7000 | 501.6 | 35,11,200 |
| 27 | 15 mm nominal bore | Each | 1200 | 74.8 | 89,760 |
| 28 | 15 mm nominal bore | Each | 800 | 594.75 | 4,75,800 |
| 29 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 400 | 109.85 | 43,940 |
| 30 | 15 mm nominal bore, 165 mm long, weighing not less than 110 gms | Each | 1200 | 156.65 | 1,87,980 |
| 31 | 100 mm nominal dia | Each | 400 | 33.2 | 13,280 |
| 32 | 125 mm nominal dia with 25 mm waste hole | Each | 600 | 45.25 | 27,150 |
| 33 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | Each | 1500 | 136.6 | 2,04,900 |
| 34 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms | Each | 400 | 106.15 | 42,460 |
| 35 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 2000 | 433.95 | 8,67,900 |
| 36 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 300 | 1,019.8 | 3,05,940 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
EOT-29-26-27.pdf
ATTACHMENT
SpecialData29.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .