Miscellaneous works related to footpath, SWD, Development of surrounding areas of buildings at different locations using grass pavers etc in Anushaktinagar, Mumbai

Amount

Abstract Sheet

Part I - Civil Works

Description of Work / Item(s)

Amount

Part I - Civil Works

Earth work excavation over areas in all soil by mechanical means / manual means upto 1.50m deep to required profile, level, grade, camber, dressing the sides, back filling, compacting in layers not exceedoing 150mm thick, ramming and preparing the bed for foundation including dewatering , shoring etc if required,disposing the surplus excavated materials at identified place within colony etc. complete all as per specification and directed by the Engineer-In-Charge.

Providing and laying dry rubble stone hard core soling of 150mm consolidated thickness in sub base to required levels and lines with first quality rubble, hand set, well packed including filling the interstices with smaller stone chips, supplying & finishing/blinding the surfaces with approved blinding quality murrum/ stone dust including watering, consolidation etc. all complete as per specification drawings & as directed by EIC.

Cutting bituminous road surfaces and reinstating the same with serviceable matetrial and PCC including scrapping wherever required including disposal of unserviceable materials at identified places within Colony etc. complete all as directed by the Engineer-in-Charge.(PCC shall be paid separetly under relevant item)

Providing and fixing 60 mm thick (min.) factory made reflective (Glossy/ Smooth finish ) interlocking paver blocks of approved make & Bruce/ Colorado shape of (M/S.Super tile or other approved Equivalent), approved colour, shade, size, shape paver blocks manufactured with cement concrete grade not less than M-35. including supplying & laying 50 mm thick well graded stone dust evenly spread over the sub base including consolidation of sub base properly vibrating with the surface vibrator, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including removing existing shahabad stone and storing serviceale materials and disposing off the debris at the designated place within the colony,including taking permission from statutory authority etc complete all as per specification and as directed by the Engineer in charge.

Providing and fixing 80 mm thick (min.) factory made reflective (Smooth finish) interlocking paver blocks of approved make (M/S.Super tile or other Equivalent),approved colour, shade, size, shape glossy paver blocks manufactured with cement concrete grade not less than M-40. including supplying & laying 50 mm thick well graded stone dust evenly spread over the sub base including consolidation of sub base properly vibrating with th surface vibrator, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including removing existing shahabad stone and storing serviceale materials and disposing off the debris at the designated place within the colony,including taking permission from statutory authority etc complete all as per specification and as directed by the Engineer in charge.

Providing, laying and fixing precast interlocking refecltive and textured grass paver blocks of following grade of M/S Super tiles or other approved equivalent of approved colour, shade, size, shape manufactured with cement concrete grade not less than M-35, over layer of 50 to 100 mm thick murum as levelling/cushioning layer over well compacted sub-base , finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including preparing the surface by levelling,dressing, spreading additional murum brought from a lead of 500 mts ,rolling the subgrade with 8 to 10 ton roller, disposing off the surplus debris/soil if any at the designated place within the colony, etc complete all as per specification and as directed by the Engineer in charge.

a) 80 mm thick grass paver block of M-35 Grade of approved design, pattern and colour

Providing and fixing colored paving chequered cement tiles of approved Shot blasted finish top surface of 30mm thick of size 300mm x 300mm of M/s.Super Tiles(Super precast and Infrastructure) or equivalent approved manufacturers as per approved design,pattern,shade for flooring and dado/skirting laid over concrete parking or footpath in 20mm thick cement mortar 1:4 bedding and jointed with cement slurry & grouted with pigment of matching shade including filling the joints and disposal of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per drawing, specifications etc, all as directed by EIC.

a) For flooring

Labour charges for removing existing Kerb stones and raising the bottom level by PCC 1:3:6 andrefixing the Kerb stones into line and level, jointingwith cement mortar 1:3, curing &including painting etc complete all asas directed by the Engineer in charge.

Providing and fixing Hydraulically pressed factory made kerb stones full bull nose /half battered from approved manufacturers like M/s Super Tiles or other approved equivalent , made up of cement concrete grade not less than M-30 and having size 500 X 325 X 125 mm , of approved including removing the existing kerb stone stacking at designated place by EIC, necessary form work, compaction, finishing, curing, fixing with CM 1:3, jointing and pointing in cement mortar 1:3 including earth work and 75 mm thick & 200 mm wide PCC 1:3:6 for foundation below kerb stone etc. complete all as per specification and as directed by the Engineer in charge

Labour charges for removing and relaying existing 60/80mm interlocking paver blocks/ Shabad tile including supplying & laying 50 mm thick well graded stone dust evenly spread over the sub base including consolidation of sub base properly vibrating with th surface vibrator, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface including removing existing shahabad stone and storing serviceale materials and disposing off the debris at the designated place within the colony,including taking permission from statutory authority etc complete all as per specification and as directed by the Engineer in charge.

Painting the Kerb stones of both existing and new ones in pattern with two coats of flat oil paint of approved colour and shade over one coat of approved primer including preparing the surface by brushing manually/washing with water jets wherever required and complete all as per specification and as directed by the Engineer in charge.

Providing & laying Design Mix Reinforced cement concrete of M-30 grade using graded stone aggregate of 20mm max. size including mechanical mixing, placing , vibration, consolidation, finishing, curing, providing & filling expansion joints wherever necessary etc.all Complete at all floors and heights / levels, in drains / nullah as specified including dewatering, if any ( excluding cost of form work, shuttering & steel reinforcement which shall be paid in the relevent item) as per drawings , specifications and as directed by Engineer-in-charge.

Extra charges for concreting with Ready Mix concrete.

Reinforcement for reinforced cement concrete conforming to IS at all floors & levels including, supplying, cutting, bending, fixing and tying in position with 1.6 mm dia soft drawn annealed binding wire including cost of binding wire, labour etc. complete all as per specifications and as directed by the Engineer-in-Charge. Note:Binding wire required for the work will have to be supplied by the contractor & the same will not be measured for payment.

a)With high yield strength deformed bars Fe 500 grade

Providing and Laying of Plain cement concrete using graded stone aggregate of 20 mm max size including consolidation, finishing, curing, cost of form work, shuttering, centering etc.complete all as directed by the EIC.-

Brickwork 230 mm thick using bricks as specified using readymix cement mortar 1:4 in including curing, raking out joints above ground level simultaneous pointing below ground level etc. complete as per specification and as directed by the Engineer in charge.

Random rubble masonry using spotless black trap or approved locally available stone in cement mortar 1:6 including raking out joints, simultaneously flush pointing using through bond stones at every 900 mm in horizontal & vertical courses of each layer, curing etc. complete all as per specifications, directed by the Engineer-in-Charge.

a) Rubble stone supplied by contractor

a) Rubble stone supplied by department

Cement plastering 20 mm thick using in Readymix CM 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per and applied over stone wall or brick walls or concrete surfaces at all floors and levels, including repaired surfaces as per manufacturer's specification, including scaffolding and removing existing damaged/ worn out plastering and disposing off debris out side colony etc. complete all as per specifications and as directed by EIC.

Providing and fixing structural steel M. S. Angle, M. S. Chanel, M. S. Flat etc for fencing/grating at all levels and location as per existing design and pattern including supplying, cutting, fabricating, welding , erecting and fixing in position, including necessary scaffolding including painting whole angle with two coat of Epoxy paint of approved shade and on coat of approved epoxy primer etc. complete all as per direction of Engineer-In-Charge.

Providing and laying non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in proporation of 1:2 laying to the levels, slope and as per the drawing and specification and as directed by the Engineer-In-Charge including testing of joints etc. complete.

150mm dia RCC Hume pipe class NP2

Painting Paver blocks with two coats of Indigo floor paint paint of approved colour, shade & make including preparing surfaces by cleaning etc. complete all as per specifications & as directed by the Engineer-in-Charge

b) On Paver surfaces with two finishing coats .

Providing and spreading manually red garden soil free from stones, pebbles etc.at site on grass paver blocks to fill the voids/ opening of grass paver blocks , wateing to settle the red soils, sweeping/brooming to clean the paver block surfaces, as directed by the Engineer-in-Charge & as per specifications. (Quantity will be taken as per truck body measurement filled with red garden soil without deduction of any voids. )

Supplying, erecting & fixing in position 12 gauge G.I. concertina wire fencing to existing barbed wire fencing /masonry wall work which consist of procuring G.I. concertina of approved quality, brand and of diameter as indicated below, erecting and fixing the same to top /side of ‘Y’ shaped angle provided over coping of compound wall, fixing concertina over ground along inside of compound wall including welding / screwing concertina to M.S. ‘Y’ angle to compound wall including cost of materials, labour, scaffolding etc. complete all as directed by the Engineer-In-Charge.

a) 600mm dia GI concertina to side / top of ‘Y’ shaped barbed wire fencing.

Supplying and fixing in position, 2 ply, 12 gauge, 4 spikes at 100 mm c/c G.I. barbed wire to M.S. angles / RCC wooden posts including supplying and fixing necessary ‘J’ hooks, bolts, nuts, washers, staples as required etc. including scafolding etc. complete all as per Engineer-In-charge direction.

Demolishing plain cement concrete works / stone masonary/ road cutting by chiseling at all levels including scaffolding, disposal of materials outside of colony etc, complete all as directed by the Engineer - in- charge.

Carrying out miscellaneous works like localised chock clearing of drains, drain cover holes, removing and replacing settled drain covers, cleaning of muds/debris accumulated on roads, making ways for clearing ponding waters at various locations within Anushaktinagar, all complete as directed by the Engineer-in- Charge. Note: 1. Work done by a labour in full day shall be treated as one job.

Levelling, dressing and Disposal of debris such as excess earth/ boulders/debris etc required for clearing the roads/footpath/parking areas etc as per requirement and disposing of above debris within Anushaktinagar at the designated place as identified by EIC including loading manualy or mechanically and transportation, all complete as directed by Engineer-in-Charge Note: 1) Voids @30% shall be deducted from fully loaded truck measurements. 2) Measurements will be taken as per Truck body. 3) Debris which cannot be loaded by JCB, has to be collected, lifted and loaded manually. 4) After removal of debris, the agency shall ensure proper leveling of surface.

Raised and cut pointing to stone work with readymix cement mortar 1:4, including raking out joints, pointing neatly and finishing the joints as specified below including curing, scaffolding etc. complete all as directed by the Engineer-in-Charge.

Providing and applying one coat of base primer (Apex Ultima protect of M/s. Asian paints or Aquatech of M/s. ICI Dulux or equivalent) and two top coats of acrylic water proof exterior coating of Weathershield flexx rainproof system of M/s. ICI Dulux or other approved equivalent make and shade over the sand face / form finished surfaces / rough cast plaster at all locations as required, thoroughly mixed and applied at an interval of 6-8 hours for each successive coats and ensure consumption of 0.47 ltr/Sqm for 3 coats,(base coat @.29 Ltr/sqm & two top coats @0.18 Ltr/sqm ) for sand face surfaces including preparation of surface, cleaning and filling the cracks and crevices with Latex caulking crack filler etc. Complete generally as per the manufacturer's specification and as directed by the EIC.

a) Over sand faced plastered / Form finished surfaces/ RRM walls

ANS Constructions.com

ANS Constructions.com