SPECIAL REPAIRS TO BLDG NO T 31 COOK HOUSE AND DINING HALL OR OF MED REGT AT SANYAT LINE UNDER GE EAST DELHI CANTT 10

Amount

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including taking down of old AC sheet roofing complete all as specified an directed.

S & F pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including taking down of old AC sheet roofing complete all as specified an directed.

M&L false ceiling with 4mm thick designer 'E' Board of size 595x595mm fixed over snap grid of GI powder coated inverted Tee or'L' section suspended from ceiling with Butter fly clip & hold down clip or 2-3 mm thick GI wire tie with ceiling/trusses/purlins etc with suitable arrangement(at any height) ,including taking down old ceiling complete with following speification. (a) Main runner/ Cross tee size 29x24.7x0.8mm. (b) Wall angle of size 22.2x22.2x0.65mm. (c) Size of grid 600x600mm. (d) Two coats oil bound distemper one side of board. (e) Powder coating on exposed side of tee/angle.

M & L for brick work with subclass `B` bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete including demolition of brick work built in cement mortar with all quoins, arches, pillars etc complete all as specified and directed.

Dismantling unframed timber workas in scantling in fillets, rails,post rafters ,purline etc under 40 Sqcm in section complete all as specified and directed.

Dismantling framed timber work as inscantling in fillets, rails,post rafters ,purline etc overr 40 Sqcm in section complete all as specified and directed.

S&F rolled mild steel Fe-410w (Gde-E-250) quality 'B' as in Roof trusses (framed ) , trussed, purlins, crane gantries , rails and fastening and havy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and directed.

S&F Joist,channel,angle or tee sections fixed as in rafter or purlins ,without connecting plate etc (cut to ordinary lengths i.e.with in 20mm of the length indicated) of grade Fe -290-(Gde E-165) complete all as specified and directed

Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L for preparation of 0ld surfaces of wall after complete removal of existing treatment & applying two coats of Oil bound distemper complete all as specified and directed.

M & L applying two coats of cement based paint on newly plastered or unplastered surfaces of wall over a coat of primer including preparation of surfaces, complete all as specified.

M&L for prepration of plastered or unplastered surfaces of wall and applying alayer of wall care puty 3 mm thick to make the surface smooth for receiving wall finish& applying two coats of Oil bound distemper complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded agg as in plinth protection finished even and smooth w/out using extra cement complete all as specified and directed.

M & L for preparation of new or previously untreated steel or iron surfaces of any description not other wise described over 10cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces exc 10 cm width or girth, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

M&L aluminum alloy powder coated (50 micron) anodized door frame of section 100 mm x 44 mm x 2mm thick,door shutter of aluminum section of size 85 mm x 44 mm x 2 m thick, top rail and both stylesof size 100mm x 44 mm x 2mm thick,lock rail and bottom rail of size 115 mm x 44 mm x 2 mm thick including aluminum anodized snap beading and rubber packing,& 5.5 mm thick froasted designer glass(as approved ), . 100 mm long alm butt hinges - 04 Nos each leaf, 200 mm long tower bolt-2 Nos each leaf, 200 mm long fancy type Alm handle- 02 Nos on each leaf, 4 lever brass 100 mm long mortice lock, & double action floor door spring heavy duty suitable for 1 m wide shutter for each leaf complete all as specified and directed.

S&F anodized aluminum alloy powder coated standard hollow section for window three tracks including aluminum frame/chowkhat with following specifications including anodized aluminum snap beading, channels, 5mm thick tinted glass, glazing clips joint cleats, rubber gasket etc and other accessories complete all as specified and directed:- (a) Frame of section:- 83.50mm x 44.45mm x 1.60mm thickness (b) Sliding window section (Channel):- 61.85mm x 31.75mm x 1.2mm thickness (c) Sliding shutters of section:- 40mm x 18mm of 1.20mm thickness with locking arrangement Note:- (i) The rates also including the cost of cutting, waste and making good disturbed surface matching with existing surface and finish as directed. (ii) Minimum thickness of powder coating shall be 50 micron

S&F 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides including one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

M&L for 30 mm thick 2nd class hard wood glazed/gauzed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (not backing) removing serviceable tile to store and rubbish off the primises complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick set and joint in neat cement slury and pointed in white or colour cement to match including rendering r 10 mm thick in CM 1:4, complete all as specified and as directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for colour chequered cement concrete tiles 30x30x2.5 cm ,machine pressed ,set jointed and pointed in neat cement slurry in floors with grey cement and pigments including 15mm thic screed bed in CM 1:6 complete all as specified and directed.

M&L for 50mm th PCC 1:3:6 type C-2 using 40mm graded agg as in sub base complete all as specified and directed.

Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing,or removing from site complete all as specified.

Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing,or removing from site complete all as specified.

S&F tubes medium grade galvanised steel with all fittings fixed to wall or laid in floors for 15 mm bore complete all as specified..

S&F tubes medium grade galvanised steel with all fittings fixed to wall or laid in floors for 20 mm bore complete all as specified..

S&F in repair rotational moulded polythene water storage tank three layered (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples incl ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed ,complete all as specified in SSR Part I

S&F in repair rotational moulded polythene water storage tank three layered (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples incl ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed ,complete all as specified in SSR Part I

S&F in repair vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as specified and directed.

S&F in repair piller tap, cast copper alloy with capstan heads, chromium plated fancy type screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long screwed shunks and fly nuts screwed for iron pipes or brass ferrule 15mm bore complete all aspecified and directed.

S&F in repair Bib taps, 15mm dia , fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, complete all as specified and directed.

S&F in repair Stop valves/Angle 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair Stop valves 20mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long complete all as specified and directed.

S&F 150 mm long, mild steel barrel tower bolt ,stove enamelled black withbright bolt and fixed complete all as specified and directed.

S&F 125 mm long, mild steel pressed handle oval type ,stove enamelled black complete all as specified and directed.

S&F 100mm butt hinges mild steel medium weight cold rolled complete all as specified and as directed.

S&F 300 mm long, mild steel sliding door bolt ,stove enamelled black withbright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate,fixed complete all as specified and directed.

Demolition, Cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified.

M & L for Cement concrete,1:3:6 type C-2 ( using 40mm graded stone aggregate) as in surfaces channels & drains complete all as specified and directed

M&L machine cut kota stone slab flooring 18-20 mm thick with uniform texture (size not less than 60 Cm on either edge)laid over screed bed 15mm thick in cement morter 1:6 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polished complete all as specified.

Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty conductor, fabricated branded metal flush box duly make embossed, concealed in walls with suitable Bakelite/Hylem sheet for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:-

(a) One light/Fan/Bell point controlled by one switch

(b)One socket outlet point 5/6 Amps on independendent board

(c ) One socket outlet point 5/6 Amps controlled by one switch on same board along with other switches.

All as per item No 61 above but with copper conductor cable FLRS 2.50 sqmm for one 3 pin socket outlet,15 Amps concealed and including provision of 2.50 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.Make for wiring cable.

M&L for switch piano flush type, single pole, one way, 5/6 Amps complete all as specified and directed.

M&L for switch piano 16 Amp, single pole, flush type, one way complete all as directed.

M&L for socket outlet 2-in-1, 5/6 Amps flash type complete all as specified and directed.

M&L for socket outlet 2-in-1, 5 pin 16 amp flash type complete all as specified and directed.

S&F electronic ceiling fan regulator , step type for ceiling fan 120 w -soket type all as specified and as directed. .

S&F in repair Sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 10 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories(Concealed) in walls all as specified and as directed.

S&F in repair Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories(Concealed) in walls all as specified and as directed.

Material and labour for laying of LT underground cable XLPE insulated, PVC sheathed, galvanised steel strip / wire armoured, aluminium conductor, 1100 volts grade, of size 16 Sqmm 2 core suitable for earthed system laid in duct / trench / along pole / wall etc including making connection complete all as specified and directed. Note : 1. The cost of AI thimbles/lugs and cable galnd etc is incl in quoted rate and no extra payment will be made for it. 2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid seperately.

Material and labour for laying of LT underground cable XLPE insulated, PVC sheathed, galvanised steel strip / wire armoured, aluminium conductor, 1100 volts grade, of size 25 Sqmm 4 core suitable for earthed system laid in duct / trench / along pole / wall etc including making connection complete all as specified and directed. Note : 1. The cost of AI thimbles/lugs and cable galnd etc is incl in quoted rate and no extra payment will be made for it. 2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid seperately.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soil complete all as specified.

Removing excavated material (soil) n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

M&L sand cushioning with a layer of fine sand 8cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified .

M&L for brick proctection to cable using old size class 'B' bricks, laid flat, dry but jointed, laid lengthtwise perpendicular to the axis of cable complete all as specified and directed.

Supply and fixing in repair MCCB incommer Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

S &F industrial type SPN enclosures with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.

S & F of MCCB TPN 125 Amp with over load and short circuit protection and rupturing capacity not less than 25 KA as specified.

Supply and fixing MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

M&L for MCB, SPN 10KA , 40 to 63 Amps, C curved type all as specified and directed

S&Fin repair LED tube light fitting diffused type suitable for 22 Watt to use retrofit T-8 LED tube light with extrubed aluminium heat sink for efficient heat disspiation alopng with integrated HF electronic driver complete all as speciofied .

Supply and fixing in repair 12 watt LED mirror light fitting T-5 (Fancy Type) and making all electric connections complete all as directed. Make : Syska Cat part No SSK-T5-12W or equivalent in approved makes

S & F in repair recess mounting 2x2 square flat panel ultra slim scoop LED light 36/42 W cool white 5600-6000K, input voltage 50HZ with driver/transformer ect suitable for AS/GB/POP ceiling incl making electric connection complete all as directed.

S & F in repair wall mounted LED light fitting,of 9Watt , fancy type including LED 9 Watt bulb etc and making all electric connections complete all as specified and directed.

S & F in repair LED bulb of 9Watt ,for batten holder complete all as specified and directed.

S&F ceiling rose surface PVC 65x50 mm type with three terminals. PVC/Polycarbonate isolated body complete all as specified.

S & Fin repair energy efficicent LED fittings 45W LED 6K suitable for street/builing area light pressure diecast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and directed.

Supply and fixing in repair street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

M&L in replacement for TV wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7mm dia taped suitable for telephoe wiring and making all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit complete all as specified and directed. Note : The PVC Conduit and conduit accessories shall be measured and paid seperately.

S & F in replacement of Modular TV socket (RJ 11 Socket Jack) 01 Module size including MS Box and modular sheet complete all as specified and directed by Engr -in- Charge.

S & F in replacement of lamp holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 600 mm x 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation complete all as specified and directed

R. S. Associates

sunil traders

M/S GEETANJALI ENTERPRISES

MAA SANTOSHI ENTERPRISES

imran construction company

GURBAX SINGH AND CO.

M/s Shubh Enterprises

JAGDAMBA CONSTRUCTION COMPANY