Special repairs to septic tank storm drain and sewage line and Provision of Sailors Cafeteria at ICGAS Chennai under GE (I) (CG) Chennai

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation, etc., and getting out in hard / dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soils complete all as specified and as directed.

Removing excavated soil exceeding 500m and not exceeding 1.5 km and depositing, levelled not exceeding 1.5m from GL where directed complete all as specified and as directed.

Demolition of Brickwork built in cement mortar including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Demolition and breaking up drain pipe, 200 mm dia( salt glazed stone ware) set in cement mortar laid in trenches including removal of debris off the premises not exceeding 100 meters complete all as specified and as directed.

Demolition of reinforced cement concrete of any description in any position including cutting reinforcement as required to facilitate demolition and removal of debris off the premises outside the MD land complete all as specified and as directed.

Material and labour for Plain Cement concrete 1:3:6, type C-2, using 40mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified and as directed.

Material and labour for Brick work with fly ash bricks in CM 1:4 straight or curved on plan exceeding 6 meters mean radius complete all as specified and as directed.

Material and labour for Precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in man hole/gully trap cover slabs (for man holes/gully trap etc) set in cement mortar 1:4 including necessary form work complete all as specified and as directed.

Material and labour for plain cement concrete Type-B1(1:2:4 ) (using 20 mm graded stone aggregate) as in coping, benching to manholes and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specifed and as directed.

Material and labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipes of 200 mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Supply and fix in repairs 110mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors /fixed to walls with clamps complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Material and labour for Mild steel TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:3 mixed with water proofing compound finished fair and even without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Material and labour for Rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished fair and even without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.Make:Impermo/Roff/Fosroc

Cleaning of septic tank including removal of Sludge/waste water outside MD land using mechanical sewage sucking arrangement considering 1000 litres of sewage per unit (one Cum) and washing with water etc including applying disinfectant etc of various capacity of tanks complete all as specified and as directed. Note: Rate quoted by the contractor shall be deemed to include for the safety precautions of the contractor men working in foul condition including insurance cover for the tradesman employed by them.

Material and labour for Reinforced cement concrete (Design mix M 30 ) in slabs supported on walls and the likecomplete all as specified and as directed.

Material and labour for Steel form work to soffits of suspended slabs such as roof slabs,floor slabs and similar works not exceeding 200 mm thick (horizontal or slope) with rough finished surface of concrete complete all as specified and as directed.

Supply and fix PVC(SWR)vent cowl 110 mm dia .Make:Finolex/Trubore/Supreme

Supply and fix in repairs 110mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors /fixed to walls with clamps complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Material and labour for Providing cement concrete Type B0 1:2:4 using 12.50 mm graded stone aggregate in lintels upto 1.50 metre clear span cills ,steps ,parapets and railings upto 60 cm height ,copings,bed plates ,water troughs and the like including weathering, slightly chamfered angles and throatingcomplete all as specified and as directed.

Material and labour for 75 mm thick Plain cement concrete 1:3:6 Type B-2 using 40 mm graded stone aggregate as in plinth protection including necessary form work complete all as specified and as directed.

Excavating over areas not exceeding 1,50 metre deep and getting out in soft/loose soil complete all as specified and as directed.

Demolition of Concrete in groud floors and pavings not exc 15 cm thickness (below or above ground level ) un reinforced including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Removing excavated soil exceeding 250m and not exceeding 500 m and depositing, levelled not exceeding 1.5m from GL where directed complete all as specified and as directed.

Material and labour for 100 mm thick Plain cement concrete 1:4:8 Type D-2 using 40 mm graded stone aggregate as in sub base . Floors and pavings including necessary form work complete all as specified and as directed.

Material and labour for Brick work with flyash brick (Modular size), straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces , finished even and fair without using extra cement complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement mortar 1:3 on fair faces of ceiling concrete surfaces , finished even and fair without using extra cement complete all as specified and as directed.

Material and labour for Screed bed or bedding layer in cement mortar 1:6 , 15 mm thick for laying floor finishes complete all as specified and as directed.

Material and labour for Screed bed or backing coat in cement mortar 1:3 , 10 mm thick for laying skirting/dado etyc complete all as specified and as directed.

Material and labour for Vitrified Light coloured tiles ,Premium quality 10 mm thick ,(Square/Recangular)area of each tile not exc. 0.36 sqm in floors and wall etc etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Preparation of newly plastered of walls by including pilasters and cornice etc and brooming down washing with water and applying two coats of oil bound distember over a coat of alkali resistant primer primer complete all as specified and as directed.

Material and labour for Preparation of newly plastered of ceiling and brooming down washing with water and applying two coats of oil bound distember over a coat of alkali resistant primer primer complete all as specified and as directed.

Supply and fix Anodised aluminium snap grid frame work (size of grid 605 mmx605mm) ceilingcomplete all as specified and as directed. Note:(i)Type of Grid : Armstrong Shilhouette grid .(ii)Minimum thickness of anodisation shall be 15 microns. (iii) Make of aluminiumgrid : Jindal/Hindalco/Indal

Material and labour for Hangers 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G I flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia ,40 mm long complete all as specified and as directed

Supply and fix 12 mm thick gypsum board Panels 600 mmx600 mm suitably placed in false ceilig grid aluminium as per specification complete all as specified and as directed.Make:Armstrong/Gyproc/M/S Gypsum (India) Ltd

Supply and fix in repair vitreous china wash basin, white , Oval shape under counter of size 550 mmx400 mm fixing over granite counter slab including 32mm dia bore 900 mm long PTMT waste pipe complete all as specified and as directed.

Supply and fix waste coupling of PTMT(half or fully threaded) of 32 mm boinimum weight :45 gms complete all as specified and as directed.

Supply and fix in repair Fancy type chromium plated pillar taps, LONG NECK ,15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make:Jaguar/Metro

Supply and fix PVC connection pipe 15mm dia with PTMT nuts at both ends of length 450 mm long complete all as specified and as directed.

Supply and fix galvanised steel water tubing of bore 15 mm, medium grade, ISI marked including all fittings such as bends, elbows, tees, short pieces, connectors back nuts, diminishing piece, caps plugs and unions etc laid complete laid in floors / fixed to wall and ceiling complete all as specified and as directed. Make:Tata/Jindal/Prakash Surya

Supply and fix in repairs PVC connection pipe 15mm dia with PTMT nuts at both ends of length 450 mm long complete all as specified and as directed.

Supply and fix in repair stainless steel sink with draining board ,kitchen bowl size 410 mm x 330 mm x 160 mm and overall size of 915 mm x 460 mm made out of 1 mm thick steel with plug and washers and waste pipe including bedding in cement mortar on to dwarf wall including fixing cantilever cast iron brackets and connecting union to waste pipe etc., all as per manufacturer's instructions complete all as specified and as directed. Make :Nirali/Joyna

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating shall be of 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters , Fixed type without sash bar , aluminium section weighing 0.55 kg/sqm including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation shall be of 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters , Side hung type without sash bar , aluminium section weighing 0.55 kg/sqm including joining cleats, glazing clips rubber neoprene packing including anodised aluminium fittings such as peg stay 150 mm long -01 no,Hinges type B-21 .100 mm long-02 nos,Handle -01 no , anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation shall be of 50 microns.

Supply and fix 4 mm thick Sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm each pane complete all as specified and as directedMake :Saint gobain/Modi guard/Gold fish

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Marble (Makrana white)18 to 20mm thick (table rubbed and polished) in steps,jambs,pillars,window cills, cooking platforms eand like over and including 10 mm thick cement mortar (1:4) and laid over grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified and as directed.

Material and labour for Rounding to edges of stone slabs one edge such as steps and cooking platfotms complete all as specified and as directed.

Material and labour for Glazed ceramic coloured tiles , Premium quality in vertical surface such as skirting,Dado/Risers of size 350x250x x 7mm thick / 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing surface complete all as specified and as directed.Note :Make of Glazed ceramic tile:Johnson/Khajaria/Somany

Material and labour for 75 mm thick M sand filling under floors or in foundation including watering and consolidation as oin pavings complete all as specified and as directed

Material and labour fot Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness ,M-35 Grade as in pavings complete all as specified and as directed

Supply and fix Powder coated aluminium shutters for doors, aluminium section weighing 0.55 kg/sqm including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation shall be of 50 microns.

Supply and fix Aluminium body(Die cast) door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of width 851 to 1000mm and weight between 61 to 80 Kg complete all as specified and as directed.Make: Hardwyn/Everite (ISI Marked)

Supply and fix Brass rebated mortice lock ,vertical type ,4 lever ,size 75 mm complete all as specified and as directed. Make: Godrej/Harrison/Dhanraj

Supply and fix 19 mm thick BWP Grade Marine Plywood fixed to walls or BWP Frame as insert in shutters /shelves of cup board shutters ,door shutter inserts etc complete all as specified and as directed.Make :Kitply/Century Ply wood

Supply and fix 0.40 mm thick Laminated sheet bof approved colour fixed over shutters /shelves of cup board shutters ,door shutter inserts etc pasted with fevicol complete all as specified and as directed.Make :Virgo/Asis

Supply and fix 0.80 mm thick Laminated sheet bof approved colour fixed over shutters /shelves of cup board shutters ,door shutter inserts etc pasted with fevicol complete all as specified and as directed.Make :Virgo/Asis

Supply and fix 60 mm long Chromium plated brass auto hinges fixed with CP screws complete all as specified and as directed.Make : Crown/Classic/ESS ESS

Supply and fix 125 mm long Stainless steel handle fixed with SS screws complete all as specified and as directed.Make : Crown/Classic/ESS ESS

Material and labour for Granite slab ,20mm thick (table rubbed and polished) in cooking platforms and like over and including 10 mm thick cement mortar (1:4) and laid over grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation for laying of cable etc., and getting out in soft/loose soil complete all as specified and as directed.

Supply and lay in trenches / floor / roof / wall XLPE Insulated sheathed, screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 Volts grade with stranded aluimnium conductor of size 35 Sqmm 3.5 Core, including testing and commissioning complete all as specified and as directed.. Make:CCI/NICCO/GLOSTER

Supply and lay common burnt clay building bricks ,sub class B ,designation 75 ,old size bricks, laid in horizontal to UG cable complete all as specified and as directed..

Supply and fix MCCB ,415 Volts, 16 KA ,4 Pole of capacity 63 amps complete all as specified and as directed..Make:Siemen/Schneider.

Supply and fix sheet metal enclosure powder coated double door for Board distribution with built in 200 Amps rated bus bar, MCB DB TPN 4 way , 415 Volts suitable for mounting MCBs/Isolators complete all as specified and as directed. Make:Indo Asian/L&T/Siemen

Supply and fix MCB TPN 63 Amps, 415 Volts of rupturing capacity 10 KA , C series complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB 5-32A single pole 240 Volts of rupturing capacity 10 KA , C series complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and includingconsealed non metallic rigid PVC conduit of 20 mm dia along with 1.5 sqmm unsheathed FRLS multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including 1.6mm thick Modular terminal boxes covered with 3 mm thick laminated hylem sheet cover for mountling switches, socket, fan regulators etc complete for one light/fan point controlled by one switch complete all as specified and as directed.Note: Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and includingconsealed non metallic rigid PVC conduit of 20 mm dia along with 1.5 sqmm unsheathed FRLS multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including 1.6mm thick Modular terminal boxes covered with 3 mm thick laminated hylem sheet cover for mountling switches, socket, fan regulators etc complete for one 3 pin socket outlet, 5 amps independent point controlled by one switch complete all as specified and as directed.Note: Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Supply and fix Modular switch socket combination 3 pin 6 Amps flush type 240 V AC complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix Modular switch socket outlet multipurpose combination 3 pin 15 Amps and one pin 5 ampsflush type 240 V AC controlled by one switch complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix Modular switch 6 Amps one way flush type 240v AC complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix modular metal box ,Flush type , 4- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 4- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix 5 Star rating ceiling fan 1200mm sweep suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor complete all as specified and as directed Make : Crompton/ Orient /Bajaj

Supply and fix Exhaust fan 300mm sweep with heavy duty motor ,70 W ,1600 m3/miniute air delivery ,1400 RPM rated speed suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor complete all as specified and as directed Make : Almonard/Khaitan

Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN021C LED20S PSU CDL GR or M/S Wipro Cat Part No D632065 20W-6500K

Material and labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground vertically (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth strip of 4 mm dia as earth lead up to the body of existing panel by means of bolts,nuts check nuts and washers of GI all as shown in electric plate No 3 connecting to earthing test point including necssary exacavation in any earth strata , PCC chambers in PCC 1:3:6 type C1, RCC 1:2:4 type B1 cover slab 50mm thick with 8 mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle watering pipe of GI 20 mm dia medium grade connected to main switch board or main control board , funnels, lug and charcol,salt etc all as applicable and as per plate No 3 of SSR part 1 connecting test point and testing on completion complete and all as specifed and as directed . Notes:-The rates quoted is inclusive of galvanised earth strip of 4 mm diamm conductor upto a length of 7.5m from the earth pit.

Supply and Install Hi wall split units Indoor, outdoor (Copper Condenser coil, Copper cooling coil and evaparator including required length of copper tubing and copper cables for connecting indoor and outdoor units) complete cordless remote control unit and with in-built ioniser and plasma filter for better indoor air quality with BEE 5 Star rating ,Inverter Type and stabilizer free operation of capacity 1.50 TR ,Year of manufacture 2021` filled with Refrirgerant Gas R-32 complete all as specified and as directed. Make: CARRIER/ O GENERAL/ HITACHI Note : The rate quoted by the tenderer shall inclusive of the following provisions :- (i) UPVC drain pipe not less than 20 mm dia from indoor unit (any floor) to upto ground level/ near to drain to be fixed with proper size base plate with clamps complete. (ii) Copper pipe 12.70 mm dia and 6.35 mm dia with 20SWG thickness refrigerant Piping with 19 mm thick Closed Cell rubber nitrile, Class "O"- arm-flex insulation and including connection complete up to 3 metre included in this item and beyond 3.00 mtr will be measured & paid separately under respective items. (iii) GI powder coated brackets 16 SWG of required size:02 Nos including grouting with suitable size fastners

Supply and fix Copper pipe 12.70 mm dia 20SWG thickness with refrigerant Piping with 19 mm thick Closed Cell rubber nitrile, Class "O"- arm-flex insulation and including connection complete all as specified and as directed.

Supply and fix Copper pipe 6.35 mm dia 20SWG thickness with refrigerant Piping with 19 mm thick Closed Cell rubber nitrile, Class "O"- arm-flex insulation and including connection complete all as specified and as directed.

Supply and fix Wiring for Circuit / Submain Wiring of FRLS cable size 2 x 4.0 sq.mm along with earth wire of size 1 x 4.0 sq.mm, Single Core, PVC insulated copper conductor (Fire Retardant) Cable in surface/recessed drawn through and including non metallic rigid PVC Conduit of size 25 mm dia complete all as specified and as directed. Note: (i) Rate quoted shall include for cutting chasing and making good surfaces (ii) Three runs of 4 Sqmm wire and PVC conduit shall measured as one unit. (iii)Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. (iv)Make of PVC conduit : Avon plast/ Kon seal / Garware

Supply and fix Single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed . Make:Indo Asian/ABB/L&T

DJ Group