CERTAIN MISC REPAIR TO WSA AND NEARBY BLDGS UNDER GE AF TECH AREA AGRA

Amount

Demolition of plain or corrugated steel /AC/ Fibre/ sheeting any gauge, thickness of roof coverings etc complete all as specified and directed.

Demolition of wrought iron or mild steel of any description at any position not otherwise provided for.etc complete all as specified and directed. by Engr-in-Charge.

S& F Mild steel angle iron, cut to shape as directed including drilling holes notching for wire as in wind ties for roof including securing bolts etc including all necessary welding for similar work confirming to Fe 290 Gde E-165 and necessary bolting or riveting upto any height of bldg complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering ridge/valley gutturs etc, fixed with self tapping screws etc complete all as specified and directed.

M&L for preparation of new iron or steel surfaces of any description, over 10cm in width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

Taking down existing door frame / shutters of area n. exc 60 Sqm with required tools & plant, without causing damage to other components of Bldg for repairing work and re-fixing the door shutters in same position after necessary repairs ie oiling and Greasing etc complete all as specified and as directed. Note :- (a) Damages if any, caused due to poor workmanship shall be made good by the contractor at his own cost to match with the existing complete without any extra cost to the department.

S&F in repair top wheel made up of taplon / cast iron wheel, including fixing only ball bearings 02 Nos circlips, 01 No shaft of dia 25 mm x 120 mm long or size as per required at site , including necessry welding, drilling and other fittings etc all complete and all as specified and as directed.

Supply and fix in repair ball bearing roller of of size 100 x 60 mm, or size as per site requirement complete all as specified and as directed..

Demolition of cement concrete (unreinforced) of any description and any position not otherwise specially provided for , all as specified and as directed.

Supply and laying new coarse sand of uniform grade spreading, leveling watering and well ramming in layers 50mm thick etc complete all as specified and directed. Note: Sand for filling shall be 1.18mm single size and and sand shall be pass 100% through 2.36mm sieve and shall be 100% retain on 600 micron sieve

Supplying and laying polythene film 400 micron thick with and including side and end over laps etc complete all as specified and directed. Note: Finished work shall be measured without considering overlap to arrive quantities for payment.

M&L for providing (PQC) pavement quality concrete as per design mix having minimum flexural strength of 44kg/sqcm in field using minimum 400 kg of cement per cum and mixed with non circular/triangular synthetic fiber as per manufacturer instruction laid to level / gradient and camber using paver including all lateral support and form work etc complete all as specified and directed. Note: Non circular/triangular fiber to be measured and paid separately at supply only rate

Supply only polyester non circular/triangular fiber 12mm long with circum circle dia meter 30-35 micron designed for melting point of 240 to 260 degree celsius and having specific gravity of 1.34 to 1.4 etc complete all as specified and directed.

M&L for finishing of concrete slabs pavements by brooming without using extra cement etc complete all as specified and directed.

M&L for forming dummy /construction joint 10mm wide and 22-23mm deep and providing a backup rod 12mm dia and top 12-13mm primed and top 10mm above backup rod sealed with using polyurethane based sealing compound with suitable primer as per manufacturer's recommendations leaving 2-3mm recess at top incl 3mm wide saw cut upto 95mm depth etc complete all as specified and directed. Note: Joint filling operation shall be carried out mechanically by the rep of manufacturer of sealant)

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to a distance exc 1.5 Km but not exc 5.0 Km etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on external wall surface on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation by applying of new surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Normal / comoflage pattern, as per manufacturers instructions etc complete all as specified and as directed.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M&L for preparation of old surface of walls (external surfaces) and finish walls by applying Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in Normal pattern, as per manufacturer instructions, incl cleaning and ensure that the surface to be painted is free from any loose, dirt, fine cracks are to be filled with wall care putty (1mm thick) or mixture of white cement and fine sand (in the ratio 1:3) complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of distemper oil emulsion white or tinted with roller, over complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified & directed by Engr-in-charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section,embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified & directed by Engr-in-charge.

Dismantling chain link fencing wire mesh, of any type and size complete all as specified & directed by Engr-in-charge.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation complete all as directed by Engr-in-charge.

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 complete all as directed by Engr-in-charge.

Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engr-in-charge) complete all as directed by Engr-in-charge.

Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc,including necessary bolting complete all as directed by Engr-in-charge.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured) complete all as specified & directed by Engr-in-charge.

S&F in repair concertina coil 900 mm dia ( in stretched position), hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips( 18 SWG), fixed to the MS angle iron/precast RCC fencing post with and including binding wire complete all as specified & directed by Engr-in-charge.

M & L for prepararing old decorated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as directed.

M&L for Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil etc complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding/backing, rubbish off the premises etc complete all as specified & directed by Engr-in-charge.

M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete/sub base of paving etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 50 mm thick etc complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over and including cement screed base20mm thick in cement mortor 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed.

M&L for ATT along the extenal wall below concrete or masonary apron using chemical emulsion @ 2.25 liters per linear meter including drilling plughing holes etc complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ 1.00 litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1part of cement: 2 part of coarse sand) to match the existing floors etc complete all as specified and as directed.

M&L for cleaning of drain n.exc. 60 cm wide and n.exe 60cm in depth by removing deposited soft / loose soil vegetation / grass and other foreign material and removal of excavated material to a distance exc 50m but n.exc 100m and deposited wherever directed complete all as specified and directed.

deva engineers (BID ID -3068757)

M/s M S Sharma and Co. (BID ID -3068268)

JEE JEE BUILDERS (BID ID -3080040)