| 1 | Supply of BEE approved 5 Star rated Inverter type split Air Conditioning unit | Supplying of BEE approved 1.5 TR 5 Star rated Inverter/dual inverter type split Air Conditioning unit having nominal rated cooling capacity not less than 5100 watts with copper Evaporator and Condenser coil and Rotary Compressor suitable for operation on single phase 230 V + 10%, 50 Hz AC supply, minimum room air flow 500 CFM and minimum Indian Seasonal Energy Efficient Ratio (ISEER) 5.20, filled with R32 / R410A refrigerant gas with installation kit comprising of standard lengths of copper refrigerant pipes, PU/ foam insulation, drain pipe and interconnection copper cable etc. complete as reqd. Please Note The manufacturers/ suppliers shall give a warranty of the air conditioner for 15 months from date of supply or 12 months from date of installation whichever is earlier. Thereafter 4 years (48 months) additional warranty on PCB (Indoor & Out door printed circuit board) card and 9 years (108 months) additional warranty on the compressor. | 100 | nos | bsnl01002130 | 60 |
| 2 | Installation testing and commissioning of 1.5 TR 5 Star rated Inverter Split AC Units | Installation, testing , & commissioning of 1.5 TR Split A.C. Unit, mounting / Fixing of indoor & outdoor unit,fixing of refrigerant piping with expanded polythene foam insulation, laying of cable for interconnections and laying drain pipe of standard length which is supply along with AC unit, minor civil work i/c making holes on wall for laying refrigerant pipe lines, control cable and drain pipes and closing the extra openings with cement sand, making good the damages etc. as reqd.(Extra length of Refrigerant piping & cable shall be paid extra) | 100 | nos | bsnl01002130 | 60 |
| 3 | Providing and fixing of Lshaped powder coated MS Bracket | Providing and fixing of suitable size L- shaped powder coated MS bracket (2 nos. per set ) for fixing of the outdoor unit of the split A/C units and fixing on wall with anchor bolts, drilling holes etc. complete as reqd. | 100 | sets | bsnl01002130 | 60 |
| 4 | Providing and laying of additional copper refrigerant pipes | Providing & laying of additional refrigerant copper pipe for suction & discharge line (size not less than 1/4inch & 1/2inch dia) or as recommended by the manufacturer along with expanded polythene foam insulation i/c cutting ,brazing /making joint etc as reqd. The measurement shall be taken on linear basis for one circuit which includes suction & discharge line & foam insulation. | 400 | mtrs | bsnl01002130 | 60 |
| 5 | Supply and laying of extra copper cable for Split AC units 3 core 2.5sqmm | Supplying & laying of 3 core 2.5 sqmm PVC insulated & sheathed copper cable for electrical connection of indoor and outdoor units of ACs etc as reqd. (Finolex/L&T/Polycab/Havells) | 400 | mtrs | bsnl01002130 | 60 |
| 6 | Providing and laying additional drain pipes | Providing and laying of additional drain pipe of size 20 mm /25mm dia polythene / U PVC (M class-ISI) pipe along with all accessories and fixing on surface of wall with saddles/ C-clamps (if required) suitable for drainage of condensate water etc. as reqd. | 300 | mtrs | bsnl01002130 | 60 |
| 7 | Providing and charging of additional refrigerant gas | Providing of additional R32 /R410A refrigerant gas (if required) and charging /top up into the Split AC units etc. as reqd. | 40 | kgs | bsnl01002130 | 60 |
| 8 | Supply and fixing of MCB protected Socket outlet box | S/F of MCB protected Socket outlet 4 module with metal box comprising of 01no. 25Amps socket and 01no. 25Amps Plug and 01no. 25Amps C series SPMCB for Split AC units i/c connection, testing etc. as required. (Make- Legrand /Havells/HPL/Standard) | 40 | nos | bsnl01002130 | 60 |
| 9 | Supply of 20Amp 3pin metal clad industrial plug | Supply of 20 Amp 3 pin metal clad industrial plug suitable for 220-230 volts single phase 50 Hz AC supply confirming to IEC60884 1 | 40 | nos | bsnl01002130 | 60 |
