Oil bound distempering painting of 100 No houses T1 to T6 exterior paint of 64 No. houses T5 Sector 3 and addition of toilet adjoining to house No 2 T8 in existing area of BBMB colony Talwara Township during the year 2025 26

Amount

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying one coats to get required finish (AOR Attached)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface. (CSR item No. 16.11) A&C-1

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint with special quality paint. (CSR item No. 16.19.)

Scraping White wash and colour wash (CSR item No. 8.31.)

Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres with cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm (CSR Item no. 31.1(a)

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10 Sqm over and including base coat of waterproofing Cement Paint applied @ 2.20 Kg/10 Sqm

Pointing with cement mortar (1:3) on brick work in substructure as per Technical Specifications

Addition of toilet adjoining to house No. 2 T-8 in existing area of BBMB Colony Talwara Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.(CSR item No.6.6)

Cement concrete 1:4:8 with stone ballast 40mm gauge using concrete mixer volumetric type[CSR Item No. 10.11](ii)

Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type (CSR item No. 10.13 ii) A&C-1

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc ( CSR item no. 9.8 )

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete ( CSR item no.18.17)

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade Using Concrete MixerM20 ( CSR item no.21.32 e( i )

First class burnt brick laid in cement sand mortar 1:4 in first storey up to 4 meter[CSR Item No.11.8]

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth(CSR Item no. 11.7)

Damp proof course 2.5cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded [CSR item No.10.28]

12.5 mm thick cement plaster 1:5 [CSR item no.15.10]

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure 4kgf /cm²) conforming to IS:4985, including fixing with MS clamps U-PVC pipes (working pressure 4 kgf. / sqcm) pipe 110 mm dia. ( CSR item no.13.74 (i))

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing[CSR Item no.13.13(i)]

Plastering on underside of ceiling 10mm thick cement plaster 1:4 [CSR Item No.15.44}

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.[CSR Item no.14.72]

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete[CSR Item no.14.128]

Kapoor Sail wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position.[CSR Item No.17.15(xiv)] Single rebate 60 x 100 mm

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2202-1 (1999) Decorative with teak facing on both sides edges lipped with teak with laminated core(IV)35mm thick [CSR Item no.17.27c(iv)] A&C-2

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt)For shutter area up to 0.50 sqm (CSR Item no. 17.23 i)

Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3 ( CSR Item no.13.51)

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 ( CSR Item no.13.45)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface( CSR Item no.16.11) A&C-1

Wall painting with plastic emulsion paint of approved brand and \manufacturer to give an even shade (two or more coats) (CSR item no. 16.63)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface. Complete as per specifications (CSR Item No.16.73)

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects 110mm o/d pipe CSR 29.43 a

Providing & fixing 560 mm, 500 mm and 450 mm internal diameter circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD). RCC Man hole cover with Frame 450mm i/d RCC manhole cover with frame as per ISI Heavy Duty (CSR 29.34 Ac ii)

Providing and fixing in position C.I. gully trap cover weighing approximately 7.26 kg and frame for gully trap chamber clear opening size 300mm x 300mm and out side size 330mmx330mm including painting the exposed surface with 3 coats of black bitumastic superior paint of approved manufacture etc. (CSR 30.75)

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 15mm i/d (CSR 28.36 a).

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 20mm i/d (CSR 28.36 b).

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. CSR 30.85 a

Providing and fixing in position C.P brass extension piece 25mm long to 50 mm long of approved make (To the Approval of Engineer- in-charge) with various fixtures complete in all respect (CSR 30.64 B)(i)

Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect C.P brass 15mm Angle valve without flange [CSR item No. 30.66 c]

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 550 mm x 400 mm x 815 mm CSR item no 30.32 (ii)

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect Vitreous chinaware standard white half pedestal for wash hand basin. (CSR item no. 30.43(ii)

Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect. (CSR item no. 30.38)

Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect. (CSR item no. 30.3 a)

Providing and fixing in position towel rails/ ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect C.P brass towel ring (CSR item no. 30.58 b)

Providing and fixing stainless steel Health faucet complete in all respect. (CSR- 30.24)

Providing and fixing in position CP Brass Grab Bar of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws co20mplete in all respect.(CSR30.12)

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. [CSR item No. 30.80]

Providing and fixing in position 5mm thick beveled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm,C.P brass screws and washers and S/S studs on top complete in all respect (as required by the Engineer-in-charge)(CSR-30.61(a)) Size 600mmx450mm

Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect. (CSR-30.20)

Providing and fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. (CSR-30.72) (b) PVC tube connection of size 15mm x 450mm with C.P Brass nut.

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect(CSR-30.60)

Providing and fixing in position storage type automatic electric water heater pressure non pressure type thermostatically controlled single phase vertical wall mounted of approved make (to the approval of engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 mtr three core flexible cord with plug, non-return valve and pressure release valve complete including fixing and testing complete in all respect.(CSR 30.101(A)ii 25 Ltr capacity water heater.

Providing and fixing in position SWR UPVC special for soil waste vent or anti-siphonage pipes as per as per IS- 14735 including cutting and wastage etc. cutting holes inwalls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipes Elbow 90 Degree (All side socketed) (CSR 30.81(iii) B v)

Providing and fixing in position SWR UPVC special for soil waste vent or anti-siphonage pipes as per as per IS- 14735 including cutting and wastage etc. cutting holes inwalls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipes Vent cowl (CSR 30.81(iii) B vi)

Providing and fixing in position SWR UPVC special for soil waste vent or anti-siphonage pipes as per as per IS- 14735 including cutting and wastage etc. cutting holes inwalls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipes P Trap/Floor Trap 110mm x 110mm (CSR 30.81(iii) B ix)

Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100 volts grade ton be laid in heavy gauge PVP, fire retardant conduit pipe 20/25 mm dia. (2mm thick), ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules for having electronic fan regulators, bell push, electronic buzzer, 3pin6Amp., 3pin 16/20Amp. Sockets and 6Amp, /16/20Amp. Switches (screw type Modular Accessories) etc. And covered with frame plate etc., & including the cost of required number of Modular switches/sockets, step type electronic fan regular 100walts, PVC connectors (for fan for box and electronic buzzer, steel hooks, Circular Inspection Box (Recessed Type Deep Type) PVC conduit pipe & copper wire and other petty material etc., including the cost of cutting and filling of chases. (34.02) Wiring light point. CSR Item No.34.02(ii)

Wiring 6 Amp. wall socket point CSR Item No. 34.02(iv)

Wiring 16/20 Amp. power plug control point. CSR Item No. 34.02(vi)

Wiring light point with double control switches CSR Item No.34.02(viii)

Overall size 2.5sq.mm (Un sheathed) CSR Item No.34.09(iii)

PVC Flexible Pipe 20mm dia. CSR Item No. 34.12(xxv) (a)

Bidder Name

Amount in Words

RATTAN BUILDERS PVT LTD (BID ID -858231)

M/s Liak Ahmed (BID ID -857397)

Ranjit Singh Randhawa Contractor (BID ID -857924)

SARJIT SINGH & CO. (BID ID -856427)

SARJIT SINGH & CO. (BID ID -856427)

Ranjit Singh Randhawa Contractor (BID ID -857924)

RATTAN BUILDERS PVT LTD (BID ID -858231)