WATER SUPPLY SCHEME DALELGARH OF BLOCK MALERKOTLA1 DISTRICT SANGRUR PRWSSIP Component 2ai

Amount

Component -1

Providing and installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed make capable of delivering 427 LPM against a head of 85 mtr (15.00 BHP) along with including M.S. Column Pipe of suitable size 80mm=50 mtr (in 3 mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respect as per standard Specifications.

Providing & Fixing Electric Panel Board (ISI marked) Consisting of electric appliances such as Automatic star Delta Push Button with oil immersed starter, Main switch, VM ampere Meter, E LCB, shunt capacitor, single phase Preconter, including lamps, Kit-kat etc. Complete in all respect.

Repair of Pump Chamber

White washing scraping inside of Pump Chamber as per CSR item no. 8.31 (a)

Scraping of snowcem robbiacem etc. (as per CSR item no. 8.31 (a)

White washing 2 coat inside of Pump Chamber

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Scraping of plastering of Pump Chamber (as per CSR item no. 8.31 (c))

Plastering 1:4, 12.5mm thick on Pump Chamber (as per CSR item no. 15.9)

Painting two coats excluding priming coat with ready mixed paint in all shades on old wood work With special quality paint Qty. as per item No. 5

Supplying & fixing glass panes including special metal sash putty of approved make.

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

Repair of door & window.

Repair of OHSR

P/F OHSR Jali

CI Cover of OHSR

Repair of Wall leakage including scraping & plastering

Painting of OHSR pipes including cost of labour & material complete in all respects.

Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.

Providing & fixing aluminium ladder inside the tank.

Cement concrete 1:8:16 with 40 mm gauge stone aggregate to be used instead of brick ballast.

Conglomerate floor 40mm cement concrete topping 1:2:4

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Cement concrete 1:8:16 with 40 mm gauge stone aggregate to be used instead of brick ballast.

Conglomerate floor 40mm cement concrete topping 1:2:4

Repair of Corner pillars.

Repair of Gate pillars.

Structural steel work in angles, tees and flats, riveted or welded including cutting fixing all gusset plates with hoisting and erecting in position.

Iron work paint (as per CSR item no. 16.19 (a)) Main Gate of w/w = 3.34 sqm Pickets = 24 x 0.22 = 5.28 sqm Total = 8.62 sqm

Finishing walls with exterior decorative cement based paint such as snowcem an new work in two coats of main gate piller & corner piller

Provision for making new connection with exit pipe line as per analysis A-20

Thrust bearing through out the pully/ road or any other obstacle at the depth of 1 mtr. to pass pipe

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Automated water controller switch to start or stop the pump based on water reservoir level.

Component -2

Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Component -3

Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.

PVC pipe 63mm o/d 6Kg/sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 3No. With each of Size 0.9m x 0.9m

Size 0.9m x 0.9m

Size 0.6m x 0.6m

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 90 mm o/d

Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25

PVC pipe 63 mm o/d

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=4.50 mtr (as per CSR 28.36 (a)) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Painting on Board both sides including priming coat , printing & Map as per Water Supply & Sanitaton standard

Cost of Component -4 (Operation and Maintenance)

Provision for sodium chloride for disnfection of water Complete in all respect

Credit of Old machinery and 6 No. Sluice Valves (-)