82630 PROVISION OF COVERED SHED NAME BOARD AT MAIN GATE AND 02 NOS SPLIT AC IN UNIT DINING HALL AT TS AVADI UNDER AGE(I) NAVY CHENNAI

Amount

SCHEDULE 'A' (B/R WORKS)

Excavating in trenches in hard /dense soil , n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and as directed.

Excavating in trenches in hard /dense soil , not exc 1.5 m wide and exc 1.5 m but n. exc 3 in depth for foundation, etc. complete all as specified and as directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) offoundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Material and labour for M-10 Grade plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as foundation filling and mass concrete in drain, complete all as specified and as directed.

Material and labour for M-30 grade using 20 mm aggregtae for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and as directed.

Material and labour for M-30 grade using 20 mm aggregtae for Columns, pillars, piers, posts and struts complete all as specified and as directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) ot less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No 10 above but for 6 to 8 mm dia complete all as specified and as directed.

Supply and fix rolled steel sections in special curved frame structure Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410W (Gde E-250) quality B and upto height 10 metre and including necessary scaffolding, complete all as specified and directed.

Supply and fix rolled steel sections fixed with angle cleats and connecting plates Fe-410 W (gde E-250) quality B etc complete all as specified and directed.

Supply and fix of 16 to 20mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.

M & L for Grouting 50 mm thick under stanchion bases or grillages, etc. including any temporary shuttering to edges with cement mortar 1:2 complete all as specified and directed.

Supply and fix 110 mm dia bore PVC pipes, single socketed in any length with rubber ring joints,fixed to walls,with stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts every 1.5 mtr interval and securing ends of stays to wall or roof complete all as specified and directed.

Supply and fix Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges of thicness 1.25 mm of 100 mm dia complete all as specified and as directed.

Supply and fix Stop ends (for spigot or socket ends) of 100 dia of 1.25mm thick complete all as specified and as directed.

Supply and fix 110 mm bore PVC bends with access doors complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping Screws all as specified and as directed.

Material and Labour for preparation of new steel surfaces over 10cm in width or girth not otherwise described and applying two coats of polyurethane paint over a coat of polyurethane primer complete all as specified and as directed.

M & L for brickwork with fly ash , staraight or curved on plan exc 6m mean radius , built in cement mortar 1:6 cmplete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for Granite (of any type) work (table rubbed and polished ) in steps , jambs, pillars window-cills, cooking platform and like in CM 1:4 incl pointing in white cement 1: 2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and Labour for installation of Signage describing “NAVAL WT STATION AVADI” in English and Hindi total letters width -6.52 Ft X Total Length Height -3.3 Ft with 22 guage -Stainless steel glossy . Letter depth -1-2 in. complete all as specified and as directed.

M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M & L for Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed.

SCHEDULE 'A' (E/M WORKS)

Ponit wiring with 1.5 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and inculding non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concaled including provn of pre fabricated galvanised module box of 2 mm thick of suitable size as required at site for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable for earth continuity, connected to earth duly complete all as specified and directed for the following:

(a) One light point controlled by one switch

(b) One fan (Ceiling/Wall/Exhaust fan) point controlled by one switch (Concealed point)

S & F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

S & F Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed.

S & F Modular white cover plate with frame, 6 module complete all as specified and as directed.

S & F Modular white cover plate with frame, 8 module complete all as specified and as directed.

S & F for Modular Metal flush box,6 Module complete all as specified and as directed.

S & F for Modular Metal flush box,8 Module complete all as specified and as directed.

M & L Ceiling rose, 3 Terminal Polycarbonate, Isolated body complete all as specified and as directed.

S & F MCB DB double door Single pole and neutral 08 way sheet steel phospetised powder painted with 200 amps rated bus bar 240 Volts nautral link, IP : 43 protection , double door flush mounting type, making good the disturbed area as per existing surface complete all as specified and as directed.

S & F MCB DB double door Single pole and neutral 04 way sheet steel phospetised powder painted with 200 amps rated bus bar 240 Volts nautral link, IP : 43 protection , double door flush mounting type, making good the disturbed area as per existing surface ccomplete all as specified and as directed.

S&F MCB SP 6 to 32 Amps 240 Volts, 10 KA complete all as specified and directed

S&F MCB SPN 40 to 63 Amps 240 Volts, 10 KA complete all as specified and directed

Supply & fix LED down lighter, IP66 protection with IP lens ensuring superior lighting levels making it an ideal for low bay applications 40 W complete all as specified and as directed. Make: Crompton Cat part : CIP-311-40-57-HL2-LM-NSG Photon Ultra or equivalent makes as mentioned in the list of makes as approved by AGE(I).

Supply and fix LED Flood light 80 W IP 66, made up of pressure die cast aluminium housing with toughened glass and high power LEDs , system efficacy >110/120 LPW, 10KV SPD included complete all as specified and as directed. Make: Crompton model: profile neo or equivalent makes as mentioned in the list of makes as approved by AGE(I).

S&F Wall fans AC single phase 230 V of size 450 mm sweep with complete set with fixtures, 5 Star rating , metallic body complete all as specified and directed. Make: Bajaj SUPREME PLUS or equivalent makes as mentioned in the list of makes as approved by AGE(I).

S & F sheet metal enclosures VTPN DB 4 way for incorporating MCCB as incomer and SP/TP MCBs as outgoing, IP-43 with metal double door with 250 amps rated copper busbar, 415 volts, as per IS-8623 all as specified and as directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed

Supply ,install and testing split Air conditioner of 1.5 TR capacity inverter type 3 Star rating with indoor and outdoor units (copper condenser coil, copper cooling coil and evaporator including required length of copper tubing and cables for connecting indoor and outdoor units ) complete with cordless remote control unit , with inverter rotary compressor with inbuilt air ioniser and plazma filter for better indoor air quality complete ,complete all as specified and as directed. Make : VOLTAS / BLUESTAR /CARRIER/ O GENERAL/HITACHI. Note : Rate quoted is inclusive of the following:- (i) Drilling hole on the brick wall to facilitate routing of Copper pipe, drain pipe and cable from indoor unit to outdoor unit. (ii) Sealing the hole from outside ,after installation, with white cement. (iii) Pressure testing , cooling performance check and product demonstation. (iv) cable for connecting indoor and outdoor unit upto 3.00 Mtr each. (v) Material and labour for fixing Remote stand in wall. (vi) Copper pipe, upto 3.00 Mtr each.

S & F voltage stabilizer for split AC capacity of 4KVA for split type AC complete all as specified and directed. Make: V Guard/Microtek/Voltas

M & L for single pole and neutral (SPN) sheet metal enclosure with a two pin and earth plug and socket complet with one single pole MCB 240 V, 20 amp complete all as specified and directed.

Material and labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 2 run of 4 sqmm,1 run of 4 sqmm & one run of PVC conduit shall be measured as single unit

Supply and laying LT UG XLPE insulated cable of size 35 Sqmm 3.5 core 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs complete all as specified and directed

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables/pole and getting out of excavated material complete all as specified and directed

Returning, filling in including spreading, leveling, watering, and well ramming in layers not exceeding 25CM thick each excavated soil in trenches after the pipes have been liad and tested complete all as specified and directed

Removing excavated soil to a distance not exceeding 50 meter amd depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed

Supply and fixing high density poythelyne (HDPE) pipes of pressure rating 6kgf/sq/m of size 50 mm for cable protection laid in trenches complete all as specified and directed

M & L for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 in SSR part 1 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 15 mm GI pipe (Medium grade) for protection of earth wire and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable complete all as specified and directed.

S.T.S.CONSTRUCTIONS AGENCIES (BID ID -3213725)

JANANIKARTHIK ENTERPRISES (BID ID -3206566)

SHRI S SANTHAKUMAR (BID ID -3207661)

D Subramani & Sons (BID ID -3208087)

BKR Enterprises (BID ID -3208301)