Repair and maintenance of 220v OH line from sub-station to Joriya Mandir for street light under SDOCM.

Amount

Supply of RCC pole

Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete(1:3:6)layer on top with including excavation and refilling etc as required.

Dismantling of overhead lines comprising of copper/ aluminum overhead conductor, G.I. wire, cross arms, insulators etc. as required 10 span x 2 wire x 40 mtr x 0.214

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. asrequired 10 span x 40mtr x 2 wire x 0.214

Supplying and erection of100mm X80mm pin insulator complete with G. I. Spindle and nuts etc. as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent/ HPMV/ HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and erection of 100mmX110mm shackle insulator withG. I. Bolt, nuts and straps etc. as required.

Supply and erection of nut bolt & clamp for bracket

Supplying and erection of stay set complete (galvanized) with 19/ 20 mm dia X 1.8 meters long stay rod, anchor plate of size 45 cm X45cmX7.5mm, thimble, stay clamps, turn buckle (20mm X60cm), 7/4.00 mm dia G.I.stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Transporting of pole

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of1m above ground level and removal of rubbish upto a distance of50 m outside the periphery of the area cleared

GI wire 8SWG + Erection of 8 SWG GI wire as required 10x3x40x0.132

Erection of cradle guard as required 10 span x 32 Nos

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per meter) cross arm for 2 wire overhead line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle iron/channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Total impact of GST for the purpose of CTC

M/s Sanjay Supplier

M/s Arvind Kumar Singh