Construction Of Tharuk Sarai Building At Tangtse Durbuk.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by engineer-in-Charge. All kinds of soil.

Providing and laying dry stone pitching in horizontal level including cost of stone complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centring and shuttering including strutting, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts

Centring and shuttering including strutting, propping etc. and removal of form work for: Lintel, beams, plinth beams, girders, bressumers and cantilevers

Centring and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms.

Random Rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering complete : 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 35 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

French spirit polishing, Two or more coats on new works including a coat of wood filler

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.)

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc

Providing and fixing local ornamental shingtsak including French spirit polishing complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and fixing 12mm thick ply wood with 4” wide paneling T&G with necessary cornice and polished two or more coat on new work including cost of wood filler

Carriage of Cement and steel from an average distance of 120 km by M.T

Carriage of Sand and Aggregate from an average distance of 20km by M.T

Carriage of Stone from an average distance of 20km by M.T

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).. Size of Tile 600x600 mm

Wiring for light point , fan/ exhaust/call bell point/ amp socket point with 15 mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, without box as required.

wirring for 16Amp socket outlet with 2.5mm FR/PVC insullated copper conductor cable in existing recessed pvc conduit including sheet as requried .

Supplying and fixing 0f 1 inch, ¾ inch pvc conduit capping along the accessories in surface / recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 10 amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch ms box complete as required including connection.

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutters and 20amp 240 volt single pole mounted in recessed including m.s box complete as required

Supply and fixing of combined 3 pin 240 volt 10 amp. Socket outlet with safety shutter and 10 amp. 240 volt single pole mounted in recessed including complete MS box complete as required

3 modular plate

8 modular plate

Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required. Single pole 6/10/20amp

Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required. Double pole 63amp

Supplying and fixing of the following light fixture including all accessories like electronic ballasts comes etc. complete as required concealed / tube lightning LED luminaries as per Philips..

Supply of 11000 volt grade aluminium conductor KPLE insulated PVC sheath arramged complete as per specification as required 25 mm 3 core

Supply and fixing single pole and neutral sheet steel mcb distribution box 240 volt on surface recess complete with tinned bus bar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including points etc. as required 16way double door spn

Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100mm sand cast Iron Por Strap,10litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the wall sand floors wherever required : White Vitreous china Orissa pattern W.C.pan of size 580x440mm with integral type foot rests.

Providing and fixing wash basin with C.I.brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450mm with a pair of15mm C.P. brass pillar ta

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357mm

providing and fixing brass toilet paper holder including cost of wooden pvc.

providing and fixing of soap dish (C.P brass) with bracket etc.

providing and fixing of bib cock approved quality 15mm moninal bore.

providing and fixing of flow trap of PVC

providing and fixing of soild waste and vent pipe 100mm dia PVC

providing and fixing of soild waste and vent pipe 75mm dia PVC

providing and fixing of plan bend of requried degree 100mm dia

providing and fixing of plan bend of requried degree 75mm dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) 25mm OD

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) 32mm OD

Providing and placing on terrace (at all floor level) polyethylene water storage tank ISI:12701 marked indicating the BIS License NO. with cover and Suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings and the base support for tank (Sintex, Electroplast, Star, Lotus or Equivalent having valid ISI License)

Providing and fixing Stainless Steel AISI304 (18/8) kitchen sink as per IS13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x510 mm bowl depth 200 mm.

Providing and fixing C.P Brass close hole basin mixer piller tape of approved quality and make 15mm nominal bore of Standard back type. .

Providing and fixing C.P Jalli.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and color. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing of insulation for water storage tank with nitrile sheet, tapping with cello tape, Rock wood 6 inch per side, wire mesh, polythene, aluminium sheet 26 gauge cladding with dia of, complete job. 19mm thick nitrile sheet.

Providing and fixing of insulation for the insulation of pipe with nitrile tube, tapping with cello tape for inner wall fittings, complete job including carriage. 19mm thick, 50mm dia (OD) (PPR 25mm)

Providing and fixing of insulation for the insulation of pipe with nitrile tube, tapping with cello tape, Rockwood 6 inch per side, wire mesh, polythene, tapping with cello tape aluminium sheet 26 gauge cladding with dia, complete job including carriage. 19mm thick, 50mm dia (OD) (PPR 32mm)

Providing and fixing 1.5 H.P (KIRLOSKER) motor including fitting complete job.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including Hot finished welded type tubes sintex stand lump sum

Providing and fixing of 1.5 ton 5 star split AC with air purification with digital display and digital remote control hot and cold type including stabilazer, wirring and necessary accessories all complete as per direction of engineer in charge.

Providing and fixing of 25 liter gyser including all accessories like mixer as per havells or equivalent and fitting complete .