Work

Amount

Details of Work.

Erection of auxiliary structure consisting of columns, beams, peaks, masts, etc and auxiliary structure required for installation of isolators, CTs, PTs, L.A.s and all other equipments. All material to be erected shall be applied by UPPTCL free of cost but all men, material and T&P required for satisfactorily completion of work shall be arranged by contractor at his own cost.

33 KV Side ( Auxilliary structure )

Erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material/equipments from store to erection site including all other associated work to complete the job satisfactorily.

36 KV Line Isolator

36 KV Bus Isolator

CT/PT Junction Box

36 KV Conventional Triple Feeder Panel

ABT Meter

Cutting, strengthening, bending, laying 800 mm below inside and above ground of following size of MS Flat for earthing of main and auxiliary structure , equipment structure and its material, etc including welding with main earth mat and with object to be earthed/excavated of trenches it’s backfilling.

Interconnection of following equipments and bus bar including cutting, bending of conductor and jumpering, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specification.

33 KV Bay

Preparation of interconnection diagram of various connection between CB, CT, PT, & triple feeder panel.

Laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and JB, etc in switchyard as per cable schedule.

2C x 2.5 Sq mm. unarmoured.

4C x 2.5 Sq mm. unarmoured.

6C x 2.5 Sq mm. unarmoured.

Termination of following sizes of cable as laid above as per cable schedule including making necessary holes in glands plates or box wherever required, supply and fixing of cable glands of appropriate size, supply & providing ferrules & Nos for each core of cable and it’s termination with crimping type lugs of dowell/tension make and all associated work to complete the job satisfactorily.

2C x 2.5 Sq mm. unarmoured.

4C x 2.5 Sq mm. unarmoured.

6C x 2.5 Sq mm. unarmoured.

Work of Illumination

Supply &fixing of 120 watt LED Lamp Crompton Greaves, Bajaj/ Havells make fitting including lamp, ballast igniter etc. for fixing on structure including cost of all material labour and T&P for completion of work

Supply & fixing of junction box on lighting poles of size 200x200x150 mm. of MS sheet SWG duly painted with synthetic enamel paint box should be fixed and backlite terminal strip of 4 Nos terminal both should be fixed on sun mica sheet and half round M.S. Clamp with GI pipe for fixing the junction box on the structure

Supply & fixing of 16 Amp. MCB make- Crompton greaves, Bajaj/Havells make fitting on structure including cost of all material labour and T&P for completion work.

Laying of 2x2.5/4x2.5 sq mm PVC cable 50cm.blow the ground level in PVC conduct pipe after excavation and back fitting including all labor PVC pipe etc.

Rates qouted by the bidders shall be without taxes. Taxes applicable if any to paid extra

M/S SAI RAM ENTERPRISES

V K BACKUP SOLUTIONS