8781 SPL REPAIR REPLACEMENT OF ALUMINIUM WIRING TO COPPER WIRING AT ADM BLDG OF PCDA O AND ADDN ALTN TO EXISTING LIGHT FITTING TO RECESS MOUNTED FITTINGS OF 1ST AND 2ND FLOOR OF PCDA O ADM BLDG UNDER AGE EM II OF GE SOUTH PUNE

Amount

Taking down carefully the existing unserviceable batten/conduit/concealed type aluminium point wiring for light, fan, socket 5 Amps and15 Amps complete removing the same including fittings/fixtures and making good the disturbed surfaces of walls, floors, ceiling etc complete all as specified and as directed.

Taking down unserviceable main switch/DB, Teak wood boards etc complete all as specified and as directed.

Taking down submain wiring of any size complete all as directed.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories including necessary modular metal flush box/pressed steel terminal boxes and modular white cover plate/ 3 mm thick ISI marked laminated sheet cover and brass screws with cup washers for fixing switches, sockets, fan regulators etc. including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light point controlled by one switch, complete all as specified and as directed.

All as per item No 04 above but for one 3/2 Pin 5 Amp socket out let point on the independent board.

All as per item No 04 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.

All as per item no 04 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket point.

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of steel screws for mounting switches, sockets, regulators etc complete for one light point controlled by one ,one way switches complete all as specified and as directed by Engineer-in charge.

All as per item No 08 above but for one call bell point controlled by one bell switch.

All as per item No 08 above but for one ceiling fan point controlled by one switch.

All as per item No 08 above but for one light point controlled by two 2-way switches.

All as per item No 08 here-in-before but for one 5 Amps 3/5 pin socket outlet on the same board with other switch.

All as per item No 08 here-in-before but for one 5 Amps 3/5 pin socket outlet on independent board.

All as per item No. 08 above but wiring with 2.5 sqmm copper cables with 2.5 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board.

All as per item No. 08 here-in-before but wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on indipendent board.

Supply and fix single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 10 A ,240 V complete all as specified and as directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular type fan regulator 120 Watts , 2 module , complete all as specified and directed.

S&F modular type bell push switch , 1 module , complete all as specified and directed.

S & F modular white cover plate with frame, 2 module complete all as specified and as directed.

All as per item No 25 above but for 3 module

All as per item No 25 above but for 6 module

All as per item No 25 above but for 8 module

Supply and fix ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed.

Supply and fix call bell AC, 230 volts single pole complete all as specified and as directed.

S&F MCB single pole, 240 volts 6 to 32 Amps, 'C' curve, complete all as specified and as directed.

S&F MCB single pole and neutral 06 to 32 Amps, 240 Volts, 'C' curve, complete all as specified and as directed.

S & F MCB TPN 40 to 63 Amps, 415 Volts 'C' curve, complete all as specified and as directed.

S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed.

Supply and fixing load line distribution board TPN vertical, 4 way double door type, fixed on wall semi flush with incoming MCCB 4 poles 125 Amps, 10 KA, busbars , neutral link, blanking plates with IP 43 protection and door earthing complete with all accessories all as specified and as directed by Engineer-in-Charge.Make : Indoasian Cat No 811888 or equivalent in C&S/ Havells//Legrand/ABB/Schneider Note: Outgoing MCBs shall be measured and paid separately.

Removing the existing ceiling fans (before carrying out ceiling repair work) and keeping them in safe custody and refixing at the same or an locaton after proper cleaning and with new 'U'clamp set with nut bolt washer, split pin and rubber bush, down rod if required and new capacitor 2.5 mfd complete and connecting with PVC cable with stranded copper conductor of size 0.75 Sqmm, complete all as specified and directed. Note: The rate quoted deemed to be included the cost of U clamp set, down rod, capacitor and PVC copper cable for connection.

Supplying and fixing of ceiling fan , five star rating, (BLDC) white/ivory 1200 mm sweep, 3 wings suitable for operating on AC 220/230 volts single phase, 50hz supply with down road complete, including necessary PVC insulated flexible wire 3 core for connecting from ceiling rose to connector etc complete all as specified and as directed

S&F mild steel fan hook / U clamp made out of mild steel flat iron of suitable section & size bend to required shape including necessary welding as per site requirements suitable for hanging the ceiling fans with fastener / bolts, washers and nuts etc complete all as directed by Engr-in-Charge

M&L for submain wiring concealed type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L for submain wiring surface type/conealed type as required at site with four runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 10 Sqmm, 1100 volts grade (FRLS) and one run of 10 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC casing and capping with all necessary accessories complete all as specified and as directed. (Note :- Four runs of 10 Sqmm cable, one run of 10 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Supply and fix recess mounted low glare LED panellight 2'X2' size 36 watt white/warm white for armstrong/grid ceiling or similar ceiling mounting system complete prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade including taking down old complete all as specified and directed. Make: Halonix cat No HLFPR22-11-36-CW-37mm or equivalent in BAJAJ/Wipro/Crompton/Havells

S & F LED batten suitble for indoor application 20 W, 4' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down old complete all as specified and as directed by Engr-in-Charge. Make : Halonix Cat No HLB-07-20-CW-IP or equivalent in Havells/ Bajaj/Wipro/Crompton

RELIABLE ENTERPRISES (BID ID -3518148)

M/s.BAJRANG CONSTRUCTION (BID ID -3510205)

M/S Eagle Electricals And Rewinding Works (BID ID -3513188)

ANAND ENTERPRISES (BID ID -3519376)

M/S Sharvi Construction (BID ID -3513159)

GRID SYSTEMS (BID ID -3513172)

REKHA ELECTRICALS (BID ID -3509938)

AIRDOT ENGINEERING (BID ID -3518980)

R R Associates (BID ID -3511545)

PAUL REFRIGERATION (BID ID -3519470)