Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.9 LAccepted-AOC M 78 GARU HARKISHAN NAGAR PASCHIM VIHAR NEW DELHI 110087 | NEW DELHI | WEST DELHI | DELHI | 110087 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹13.9 L+₹57,930.50 (4.35%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹14.2 L+₹88,170.50 (6.62%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹16.3 L+₹3.0 L (22.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹17.0 L+₹3.7 L (27.6%)Rejected-Finance NO 9 BYRAVESHWARA INDUSTRIAL ESTATE ANDRAHALLI MAIN ROAD NEAR PEENYA 2ND STAGE BENGALURU 560 091 | BENGALURU URBAN | KARNATAKA | 560091 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
27 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Gorakhpur
GE AF Gorakhpur
REPAIR/ MAINT OF STREET LIGHT AT TECH AREA AND DOMESTIC AREA AT AF STN GORAKHPUR
2024_MES_658251_1
9187/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE AF Gorakhpur
Class D cat b i
8 documents required · 8 mandatory
₹500
GE AF Gorakhpur
₹60,000
Yes
21 Sept 2024
7 Jun 2024
29 Jun 2024
7 Jun 2024
27 Jun 2024
21 Jun 2024
7 Jun 2024 - 14 Jun 2024
Amount
Supply and laying in replacement in trenches /laid in floor/road/duct/drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 Sqmmx4 Core complete all as specified and directed .
All as per item above but of size 16 sqmm 4 core complete all as specified and directed.
All as per item above but of size 25 sqmm 4 core complete all as specified and directed.
Supply & fixing in replacement PVC insulated and sheathed unarmoured two core copper conductor cable 1.5 sqmm 1100 volt to be replaced in existing fittings complete all as specified and directed .
Excavation in trenches not. exc.1.5m wide and not exc.1.5 deep and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.
Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
Material and labour for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed.
Relaying in trenches old dry well burnt BRICKS retrieved from taking out of cable sub class “B” bricks over sand cushioning for protection of cable complete all as per specified and directed.
Supply and laying in trenches dry well burnt locally available sub class “B” bricks over sand cushioning for protection of cable complete all as per specified and directed.
Material & Labour for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete of poles/stay assembly/ panels etc complete all as specified and directed.
Material & Labour for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in form work/coping of poles complete all as specified and directed.
Material and labour for 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, incl taking out old pipe complete all as specified and directed including clamps, nut bolt and washers complete all as specified and directed.
M&L for Boring under road /foot path upto 1.5 mtr depth for inserting of 40/50 mm dia GI tubing for drawing UG cable by manual or mechanical complete all as specified and directed.
M&L straight through LT Cable joint including cutting of fault cable and preparation and jointing complete of size 10 sqmm to 35 sqmm 2/3/3.5/4 core complete including taking out old joint.Make : Dension/MS-Seal/Fontech.
Tightening/Stringing only LT overhead line of ACSR conductor of any Size including on epole to another pole binding with aluminium conductor and jumper including trimming/pruning/dressing the tree branches and cleaning or creepers from poles complete all as specified and directed.
M&L for painting of LT pole 8/9 m long (above ground) after cleaning the complete body surface of pole by rubing with emery paper to remove old paint,dust etc and applying two coat of aluminium paint by brush and zebra painting with enamel paint of 20 cm alternating layer with blue and white colour for 1 Mtr from bottom complete all as specified and directed.
M&L for disconnecting burnt end or portion of 10 sq mm to 185 Sq mm 3 1/2 core cable removing the cable from loop including necessary excavation, earthwork, removing brick protection and realaying the same, and reconnecting the cable by removing burnt protion of cable and preparing fresh terminals of LT cable to pole / main switch etc complete all as specified.
M&L for numbering of LT pole with MES No with synthetic enamel paint of letter size 100 mm height complete all as specified and directed.
Labour only for checking the serviceability of the different spares / components / parts of security/street light/Flood light fittings on pole/wall any wattage/capacity of any description and in any position with the help of one Electrician and one helper , replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in new or old position, connecting to electric supply and its testing on installation complete all as specified and directed.
M&L for repair of LED street / flood light fitting of any make 30 to 100 watt including replacement of power driver, soldering and testing complete all as directed. (Note:- Cost of power driver is deemed to included in rate quoted)
Shifting/Replanting of bend and bowed street light poles in vertical position including triming and cleaning the undergrowth vegetation climbing on pole/conductor/street light fittings complete including excavation and refilling all as required at site and as directed.
Disconnecting and taking out old unserviceable light fitting’s bracket incl FI clamps of any description and in any position and supplying and fixing brackets made out of 40/50mm dia medium grade GI pipe 1.25 mtr long bent to shape and size fixed on location using new 2 nosx 30x5mm FI clamps made to shape incl nuts,bolts & washers complete all as specified and directed .
Disconnecting and taking out old existing unserviceable junction box and S&F in position new sheet moulding compound (SMC) junction boxes of size 450mmX450mmX15mm depth made out of 1.8mm thick CRCA sheet with front side hinged opening having rubber linking & locking arrangement with nut and bolt and arrangement for incoming and outgoing cable and wire. The box shall provided with and including 4 Nos, 100 Amps aluminum bus bar mounted on porcelain insulators including connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5mm FI round clamps, nuts, bolts & washers and Provn of cable from bus bar to MCB and 1 MCB 5 to 32 AMP including two coat of synthetic enamel paint over a cot of red oxide primer complete all as specified and directed.
Disconnecting and taking out old existing unserviceable street light fitting of any description and Supply & fixing Street light fitting IP-66 powder coated pressure die cast aluminium housing with high power LED as lighting source with heat resistant toughtened glass 70 W LED with 10kv surge protection complete with all assessaries of capacity 80 watt. Make-Havells cat part No. ENDURACITYLINERNEOSL70WLED757PASYBOTG /philips/Bajaj/Crompton/HPL
M&L for machine spray painting of the under mentioned LT Panel by rubbing, scraping of old paints with emery paper, cleaning and preparation of smooth surfaces complete including writing INCOMING/OUTGOING,LOCATION etc with approved quality paint all as specified and directed by Engineer – in – Charge.
Disconnecting and taking out old existing unserviceable flood light fitting of any description and supplying & Fixing, testing energy saving, die cast aluminium housing IP 65 protection,50 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps,nuts,bolts & washers all as per site requirement and as directed. Make- Havells cat part No. JETAQUANTOPLUSFLP50WLED757SYMLENS /philips/Bajaj/Crompton/HPL
Disconnecting and taking down old UNSV timer and Supplying and fixing Automatic Timer switch which switches ON/OFF the street lights based on LUX level of natural light ranges from less than 30 LUX and More Than 10 LUX of capacity 8 KW Three phase, 220V contactor rating 40A,incoming-outgoing MCB rating 40A having over voltage and under volttage protection all as specified and directed. complete all as specified and directed at site.
Supply and fix aluminium lugs for fixing armoured cable in panel of following sizes taking down old one . a) from 10 to 16 sqmm 4 core cable
b) from 25 to 35 sqmm 4 core cable
Surface dressing n.exc 15 cm deep including cutting of bushes, small tree, grass etc complete complete all as specified and directed.
S&F in replacement factory made epoxy powder coated distribution board SPN DB 2 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one SPN MCB 32/40 Amps as incomer /outgoing complete all as specified and directed.
M&L for rolled mild steel work for cross arms bracings, supports, posts, clamps and back plate fabricated from structural sections including nuts, bolts and washer, bending hot or cold drilling holes for bolts of any size and applying two coats of aluminium paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.
M&L for anti-çlimbing device, spikes type, fabricated out of mild steel bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and directed.
M&L for pole coping suitable for round steel tubular pole with plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) of size 425x425 mm and 300 mm height including necessary formwork above ground level complete all as specified and directed.
S&F replacement danger notice plate of 1.6 mm thick mild steel sheet of size 12x15 cm, vitreous enameled white with letters, figures and conventional skull and bones in signal red colour and fixed with mild steel clamps, bolts and nuts of approved size for LT line complete all as specified and directed.
M&L for providing cable path indicators made out of cast iron plate of minimum 100 mm dia & 4 mtn thick indicators LT cable and voltage written on it and fixed on Inild steel angle iron with minimum two numbers of nuts and bolts or rivets; nuts shall be tack welded with bolts after full tightening and angle iron shall be 30 cm x 30 cm x 6 mm thick and length should be 900 mm above adequate to be ensure minimum planting depth of 600 mm below ground and 300 mm above ground level, bottom end of angle iron should be anchor type to provide better grip and should be embedded-in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) block of size 200x200x300 mm angle iron shall be painted with a coat of red oxide primer through out length and there after be painted with two coats of blue colour enamel paint above ground and bituminous paint in the portion below ground complete all as specified and directed.
M&L for heat shrinkable out door end terminal joints suitable for 1.1 KV, PVC/ XLPE insulated, 3.5 core LT cable including joint kit for making joints suitable for cable of cross sectional area 25 - 50 Sqmm complete all as specified and directed.
All as per item No. 38 here in before but for cable of cross sectional area 70 - 150 Sqmm complete all as specified and directed.
M&L for plain cement concrete 1:4 8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work, finished even and fair without using extra cement complete all as specified and directed.
M&L for brick work with sub class 'B' bricks in cement mortar 1:4, straight or curved on plan exc 6 mtr mean radius as in foundation , platform, wall, ramp etc. complete all as specified and directed.
Supply and fix in repair Intergral LED Post-Top Luminaire 40 W Comprises housing with LEDs and driver. Glare-free and better uniformity and Heat resistant toughened glass with frame suitably gasketed for IP 65 Class I protection including all accessories, complete all as specified and directed.Make: Crompton greaves, Model- Maple, Cat part No: LPTO-40-CDL/havells/Bajaj/Crompton/HPL
Supply and laying weather proof cable 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 core nominal cross section in service connections complete all as specified and directed
Yaduvanshi Traders (BID ID -3041707)
Unitech India (BID ID -3042079)
Hindustan Power Corporation (BID ID -3040994)
Vijay Electricals (BID ID -3042193)
M I & CO. (BID ID -3039797)
m/s allied enterprises (BID ID -3042425)
M/S PRATAP ENTERPRISES (BID ID -3041469)
M/S DEEKSHA CONSTRUCTION ELECTRICAL REFREGERATION & WORKS (BID ID -3040547)
M/ s J S Kapoor And Sons (BID ID -3041633)
M/S RAHUL TRADING CO. (BID ID -3041712)
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .