REPAIR TO FLOORING, SUNKEN FLOORS, SANITARY FITTINGS OF TOILET AND BATHROOM IN CERTAIN BUILDINGS AND REPAIR TO JOINERY FALSE CEILING ETC IN ZONE D AREA AT VSN NAGPUR

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes work and disposal of debris complete all as specified and as directed.

Demolition of Brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

Taking down cement plaster on brick or stone wall, concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for Brickwork with fly ash Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:6) complete all as specified and as directed.

M&L for Brickwork with fly ash Bricks ,straight or curved in plan to any radius in half brick thick wall in CM(1:6) complete all as specified and as directed

M&L for Rendering 15mm thick on fair finish of bricks/concrete/stone surface of wall in CM (1:4) using WPC and finished the surface even and smooth without using extra cement (WPC to be mesuared and paid separately) complete all as specified and directed.

M&L for Rendering 5mm thick on Ceiling in CM (1:3) finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick Rendering in CM (1:4) finished the surface even and smooth without using extra cement on fair faces of brickwork or concrete surfaces complete all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

M&L for providing 75mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as Plinth protection / Path finished the surface even & smooth without using extra cement complete all as specified and directed.

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound complete all as specified and directed.

M&L for waterproofing treatment of sunken portion of toilet, cement mix with mastercrete M-81 of CHOKSEY CHEMICALS (or equivalent product of other company) in the ratio of 2:1, two part of cement and one part of mastercrete M-81 and applied in two coats @ 0.75 kg /sqm per coat all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surface complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for cement concrete (1:5:10) type E2 (using brick coarse aggregate) as in filling sunken portion where required, complete all as specified and as directed.

M&L for plain Cement concrete (1:2:4) type-B1 using 20mm graded aggregate, 40mm thick as in sunken floor, fair finish with using extra cement complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in Cement Mortar (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles all as specified and directed

M&L for Glazed Ceramic colour tiles in vertical surface of size 350x250x7mm / 450X 350X7mm thick over and including rendering 10mm thick CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour complete as specified and directed

Material and labour for Granite (of any type) work (table rubbed and polished) of 20mm thick in steps, jambs, pillars, window-cills, cooking platforms over Screed bed or bedding layer of mortar 15mm thick CM (1:4) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platform and like in cement in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base 15 mm thick in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rounding to one edge of stone slabs edges such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore all as specified and as directed .

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 15mm including cutting of Stone, Concrete Block or Slab walls and making good complete as specified and directed

Refixing old steel tubing 15mm dia and connections in new or old position (Walls, ceiling, floors, etc.) Complete all as specified and directed by EIC.

Taking up or down steel tubing and connections 20mm bore all as specified and as directed .

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 20 mm including cutting of Stone, Concrete Block or Slab walls and making good complete as specified and directed

Refixing old steel tubing 20mm dia and connections in new or old position (Walls, ceiling, floors, etc.) Complete all as specified and directed

S&F PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as specified and directed..

S&F Factory made solid panel PVC Door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rail & bottom on either side & as a gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

M & L for Preparation of old plastered ceiling surfaces with applying one coat of white wash complete all as specified and directed.

M & L for Preparation of old plastered wall surfaces and applying one coat of white wash complete all as specified and directed.

M & L for Preparation of old plastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed

M & L for Preparation of old plastered external wall surfaces and applying one coat of cement base paint complete all as specified and directed

M & L for Preparation of old plastered ceiling surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for Preparation of Newly plastered wall surfaces by applying two coats of distemper oil emulsion over a coat of primer all as specified and directed

M&L for 3mm thick wall care putty on wall complete all as specified and directed

M & L for Preparation of Newly plastered external wall surfaces by applying two coats of cement base paint over a coat of primer and complete all as specified and directed

M & L for Preparation of Newly plastered ceiling surfaces and applying two coats of distemper complete all as specified and directed.

M&L for Preperation of old painted steel surfaces and applying one coat of Synthetic Enamel paint on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.

Dismantling water tanks exc 500 ltr but n exc 1000 ltrs complete all as specified and as directed.

Dismantling water tanks exc 250 ltr but n exc 500 ltrs complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S & F in repair stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed

S& F in repair Ball brass valve 20 mm dia high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed

S & F PVC(SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F PVC(SWR) Bend 110mm bore complete all as specified and as directed.

S & F PVC(SWR) Tee 110mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to floor/wall all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore all as specified and directed.

S & F PVC(SWR) Tee 75 mm bore complete all as specified and as directed.

S&F in repairs Brass chromium plated bottle traps 40mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed.

S&F in repair grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) all as specified and directed.

M&L for PVC (SWR) floor trap with grating, 75 mm bore including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

S&F PVC, 32 mm dia, polythelene of low density of pressure raing 6 kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and as directed.

S&F in repair Cast iron nahani trap, with grating 100 mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

S&F in repair Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & Wall Hook complete all as specified and directed Make ;-Jaguar CODE-ALD 587 or equivalent in specified makes

S&F in repair Pillar cock 15mm dia, Swan Neck Tap with Left Hand Operating Knob with 450mm Long Braided Hose complete all as specified and directed Make : Jaquar Code- CON-123BKN or equivalent in specified makes

S&F in repair 2-way Bib Cock with Wall Flange, Chromium plated, 15mm complete all as specified and directed Make ;-Jaguar CODE-FUS-29041 or equivalent in specified makes

S&F in repair Bib Cock, Chromium plated, 15mm dia complete all as specified and directed Make ;-Jaguar, code- CON-037KN or equivalent in specified makes

S&F in repair Bib Cock, fancy type of PTMT any colour high pressure, 15mm complete all as specified and directed

S&F in repair Angle Valve, Chromium plated, 15mm, complete all as specified and directed

S&F in repair stop Valve, Chromium plated, 15mm complete all as specified and directed Make ;-Jaguar, Code- FON-40053 or equivalent in specified makes

S&F in repair Soap dish holder (CP Brass) complete all as specified and directed Make ;-Jaguar, code-AKP-35731P or equivalent in specified makes

S&F in repair Towel Rail complete all as specified and directed Make -Jaguar, Code-AQN-7711 or equivalent in specified makes

S&F in repair Toilet paper Holder with Flap complete all as specified and directed Make-Jaguar, Code-AKP-35753PS or equivalent in specified makes

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

S&F in repair vitreous chain squatting pan, 'Orrissa pattern" size 630x450mm white with integral foot rests, including PVC ' P' or 'S' trap (excluding flushing cistern and flush pipe) complete bedding all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed.

S&F in repair Plastic water closet seat cover, black/white, closed pattern with flat bottom, cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve 450mm etc complete all as specified & as directed Make :Prayag/ Parryware/Haindware

S&F in repair, waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 6 Kgf/Sq cm complete all as specified and directed

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.

Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed.

Taking down of chowkats with shutters (without taking off shutters from the frame) n.exe 1.5 sqm each all as specified and directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

Dismatling of cupboard partition of any description fixed in any position with nail all as specified and as directed

Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.

All as per item No 80 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.

S&F pressed steel frames of size 165x60mm with hinges ,100mm size (3 Nos each choukhat) with one or more rebates including necessary fixing lugs, lock strike plate, etc all as specified and as directed.

M&L for PCC (1:3:6) type C-1 for PS Frame filling all as specified and as directed.

S&F 30mm thick 2nd class Hard wood Skeleton door shutters complete all as specified and directed.

S&F 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides all as approved by GE complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.

S&F sheet glass ordinary quality 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

S&F sheet glass ordinary quality obscured or frosted on one side 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

S&F plywood grade BWR type BB 18/19mm thick (PLY) ISI marked fixed with screw to timber frame work fixed in repair all as specified and as directed.

S&F plywood grade BWR type BB 06mm thick (PLY) ISI marked fixed with screw to timber frame work fixed in repair all as specified and as directed.

S&F plywood grade BWR type BB 12mm thick (PLY) ISI marked fixed with screw to timber frame work fixed in repair all as specified and as directed.

S&F in repairs butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified and as directed.

S&F butt hinges, medium weight ,cold rolled mild steel 75mm long all as specified and as directed.

S&F Extruded Aluminium bow handles of size150 mm complete all as specified and directed

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm size complete all as specified and directed

S&F in repairs aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F Floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

S&F in repairs Aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

All as per item No 98.00 above but 150mm long complete all as specified and directed.

S&F in repairs extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and directed.

All as per item 100.00 above but 100mm long complete all as specified and directed.

S&F in repair hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed.

M&L for mild steel frame work such as gates, grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

M&L for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

All as per item No 105.00 above but on steel surfaces over red oxide primer complete all as specified and directed.

S&F 30mm thick (styles) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as shown on drawing on page 174 of SSR Part-II 2020 including taking down the old PVC door shutters as specified & as directed.

All as per item no.107.00 above but partly glazed i.e. upper panel will be glass pane or wiremesh fitted externally in the clear space & lower panel will be plain colour PVC sheet complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel tube & fixed in position as per manufacturer's instruction & fixing to wall with ancor bolt or screw with nemani wall plug (size 12 to15 cm long ) all as specified, as shown on drawing on page No 178 of SSR Part-II 2020 including taking down the old PVC door frame as specified & as directed.

S&F 100 mm long mild steel butt hinges all as specified and as directed.

S&F in repair 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed.

S&F in repairs mild steel pressed handles, 150 mm oval type, stove enameled black all as specified and as directed.

S&F in repairs Harrison curtain rails, 19/20mm dia, anodised aluminium alloy with fixing brackets, stops, rollers etc including taking down old one all as specified and as directed.

S&F steel windows or ventilators, fixed type or side/centre hung type with glazing bars including taking down old one all as specified and as directed.

M&L for welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.

S&F in repairs mild steel handle to existing steel windows left or right (as per existing pattern) all as specified and as directed.

S&F in repairs mild steel peg stay for windows/ ventilators all as specified and as directed.

Dismantling asbestos cement, galvalume, fiber sheet (Plan, corrugated , semicorrugated, etc.) sheet in roof covering all as specified and directed.

Dismantling of wall and ceiling board (fiber, pulp, insulation, etc) or insulation board/ slabs/ blankets, any thickness, including cover fillets all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 etc all as specified and directed.

S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle,channel or flat section) including distance pieces , cleats etc. Fe 410 -W (Gde E-250) quality-A complete all as specified and directed.

S&F mild steel screw bolts(Machine made) with hexagonal or square head at one end and screwed the other end n exc 5 cm long and diametre of neck exc 5 mm but n exc 10 mm dia all as specified and directed.

M & L for mild steel plates (Plain or chequred) channel square cut or not chequred (ordinary and counter sunk) forming holes, without any attachment for Fe-410-W Gde-E 250 quality 'A' complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/loose soil each n.exe 0.5 Cum & getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25 Cm watering & removing surplus spoil to a distance n.exe 50 mtr complete all as specified and directed.

M&L for plain Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified and directed.

M&L for Providing Gypboard (conforming to IS-2095-1982) manufactured by M/s India Gypsum false ceiling using GI perimeter channel of size 20mm (one flange) x 27mm (web) x 30mm (other flange) x 0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channels (of size 15mmx45mmx15mmx0.9mm thick) @ 1220mm centre to centre with ceiling angle (of size 25mmx10mmx0.55mm thick) fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55mm thick having Knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm) using connecting clip and in direction perpendicular to intermediate channel @ 300 mm centre to centre and Gypboard fixed to ceiling section using 25mm drywall screws @ 230mm centre to centre complete all as per manufacturer’s instructions and as directed.Including 2 coats of OBD over a coat of 1mm thick putty and taking down of old false ceiling complete all as specified and directed.

S & F 2mm thick fibre glass reinforced translucent corrugated sheet with two corrugation sheet with two corrugation side laps fixed with L-type or j-type or cranked hook bolts including taking down old sheet all as specified and as directed.

S&F Asbestos cement corrugated or semi corrugated sheets, 6 mm thick, with two corrugation side laps, fixed with L type or J type or cranked hook bolts and washers as in roof, wall etc Including taking down old AC sheet complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof as in ridge of roof covering fixed with self tapping screws etc incl taking down old one complete all as specified and directed.

S&F Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

S&F Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering fixed with self tapping screws etc complete all as specified and directed.

M&L for Repairs of Aluminium anodised or powder coated aluminium door, Toughened glass door of any size,thickness or any section including aluminium beading,5mm thick tinted glass or 12 mm thick prelaminated particle board with decorative choice lamination on both faces, handle , bottom rail, lockrails and repair/replacement of hydraulic door closer or double action floor spring hydraulically regulated and refixing in same opening all as specified and directed. Note: Hydraulic door closer and double action floor spring and tinted glass and particle board if replaced shall be measured and paid separately rest items deemed to be included in unit rate complete all as specified and directed.

S&F Aluminium Framed doors/Fixed frame works with shutters glazed including necessary joining cleats,03 nos Aluminium Hinges(100mm) in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass using powder coated aluminium sections of approved make confirming to IS.(Glazing and pre laminated particle board shall be measured and paid seperately) complete all as specified and directed by Engr-in-Charge.

S&F Aluminium Louvered type ventilator weighing 0.55 kg/mtr with 4 mm thick frosted glass with all fittings closing and opening type aluminium sections of approved make confirming to IS.(Glazing shall be measured and paid seperately) complete all as specified and directed by Engr-in-Charge..

S&F Aluminium Framed windows any pattern fixed, sliding, hung Two Track/Three Track if any) using power coated alumunium sections of approved make necessary joining cleats, Channel for sliding, in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. 5 mm thick tinted glass ,using powder coated aluminium sections of approved make confirming to IS.(Glazing and stainless steel/PVC wiremesh shall be measured and paid seperately) complete all as specified and directed by Engr-in-Charge.

M&L for Repairs or shifting of Aluminium anodised or powder coated aluminium partions of any section including aluminium beading,5mm thick tinted glass or 12 mm thick prelaminated particle board with decorative choice lamination on both faces all as specified and directed.

S&F in repairs Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.

S&F/S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed. including taking down old floor spring hydraulically complete all as specified and directed.

S&F in repair silding aluminium window locks including removing the old one all as specified and directed.

S&F mild steel 4 levers Mortice lock, vertical type, size 100 mm all as specified and directed.

S&F mild steel 2 levers Mortice lock, vertical type, size 75 mm all as specified and directed.

Supply & fix for 12 mm thick toughened glass door/ patition of approved colour, design & logo (if required any type) side opening type or sliding type with complete fittings of make DORMA or equivalent as approved including pivot hing/floor spring , handle fancy type (for VIP office doors), locking divice with duplicate kye, Spenders partition fixing rods/clits & other fittings if riquired etc & connecting jobs like tile cutting, demolition pcc, plastring & painting etc not exc. 1.50 Sqm to make site good all as specified and directed.(Note- All the fittings will be approve by GE/Engr-in-charge before work started at site) complete all as specified and directed.

S & F polycarbonate sheet, plain or coloured of 6mm thickness with multiwall along with other necessary accessories (i.e. Rubber bedding, aluminium strip etc) as in roof covering as specified and as directed.

Material and labour for providing aluminium composite panels shall consist of following (I) 3 mm thick thermoplastic core of anty toxic LDPE sandwitched between 2 skins of 0.5 mm thick aluminium sheet making a total panel thicckness of 4 mm with outer surface finished with PVDF based coating 30 micron ,ineer surface finished with a thin coat of polyster paint (II) aluminim framing of section 38 mmx50 mm x1.50mm thick , (III) aluminium grid shall not be exceed 1.0 sqm each the aluminium grid shall be fixed with clamp 40x6 mm not more than 1 m c/c (IV) Colour shall be approved by GE.

Material and labour for suspended false ceiling consisting of suitable anodised aluminium sections of ‘Tee’ of size not less than 22.50 x 22.5 x 0.5 mm Angle of size 22.5 x 22.5 x 0.5 mm & FI as per std engineering practices with ‘E’ board ceiling boards 4 mm thick in grid of 605 x 605 mm including cutting holes and making good holes for main joist, suspending with 6 mm dia GI wire to roof trusses, purling & rafters etc incl taking down old one, all as specified and directed.

S&F of 10mm thick prepainted gypsum board in the exsisting suspended false ceiling grid of 605 x 605 mm including removing old one all as specified and directed.

M/s ABHIMAN HEGDE

VIJ ASSOCIATES

M/s Rahul Traders

Vishwakarma Engineering Works