REPAIR TO CHAJJA, FACIA, LEAKAGE, SEEPAGE AND OTHER MISC B/R WORKS TO OTM AND MD ACCN IN ZONE-VI UNDER AGE B/R-IV OF GE(SOUTH), MEERUT CANTT

Amount

M&L for provision of Aluminium anodized frame work(snap grid) suitable for size as in false ceiling of size 605mm x 605mm including fixing 4mm thick gypsum board/E board in ceiling size 60cm x 60cm fixed to metacil snap gird and dismantling wall and ceiling boards or insulation boards/slabs any thickness including cover fillets, consisting of followings and all as directed:-i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of aluminium anodized main /cross tee of size 36.5mmx25mmx1.0mm thick and 25mm x 25m x1.0mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm to 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with aluminium anodized angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.0 mm anodized thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron.

M&L 6mm thick fibre cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts including Dismantling of old sheet any description as in roof covering incl ridge and removing from site complete all as specified & directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including ridges, Nainital or similar pattern roof coverings complete all as specified and directed.

S&F in repair rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries,wind tie, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, reveting and / or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

S&F plain galvanised 0.63mm, MS sheeting as in ridges, crumple section, hips, valley gutters, drips and straight flashings ( length & girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified & directed and as per manufacturer's instructions

Demolition of concrete any description and any position not otherwise specifically provided for in SUNKEN. Complete all as specified and directed.

M&L PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) for filling in sunken floor complete all as specified and directed.

M&L PCC 1;2;4 type B1 (20 mm graded stone aggregate) 75 mm thick padding to required slop in Sunken finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick cement mortar 1:3 mixed with water proofing compound on fair faces of concrete surfaces finished even and smooth without using extra cement for sunken slab complete all as specified and directed.

Taking down app water proofing membrane, single layer on roofs complete all as specified and directed.

M& L for PCC padding 1:2:4 type B1(using 20 mm graded stone aggregate) average thickness 25mm,finished fair and even without using extra cement on roof surfaces complete all as specified and directed.

Material & labour for 20mm thick screed bed in CM 1:4 on concrete surfaces of roof mixed with water proofing compound (WPC) @ 3% cement consumed as per manufacturer's instructions surfaces finished even and smooth complete all as specified and directed Note :-WPC shall be measured and paid for separately under respective item of schedule ‘A’ here-in-after).

Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F as in repair Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified and directed.

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed.

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

Supply & fix in repair wall mixer telephonic with crutch brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with telephonic with crutch (Provision for hand shower) complete all as specified and directed.

S&F as in repair chromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe, complete all as specified and directed.

S&F in repairs 15 mm thick Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/20mm-125gms) complete all as specified and directed.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor complete all as specified and directed.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed.

S&F in repair chromium plated Jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed.

S&F in repair chromium plated hand shower with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

Supply & fix in repairs PVC connections of 600mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed.

S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed

Supply & fixing in repair rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

Supply & fixing in repair rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F in repair for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms), complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 75mm bore as in waste and rain water pipes including use of stack clamps made out of 25mm by 5mm flat iron and 16mm dia round iron stays including nuts & bolts, laid for fixing into walls complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 110 mm bore as in waste and rain water pipes including use of stack clamps made out of 25mm by 5mm flat iron and 16mm dia round iron stays including nuts & bolts, laid for fixing into walls complete all as specified & directed.

Supply and fix in repair PVC bends 75mm bore, any radius complete all as specified & directed.

Supply and fix in repair PVC bends 110 mm bore, any radius complete all as specified & directed.

Supply and fix in repair for 75mm bore PVC floor traps plain with grating fixed in repairs including jointing with solvent cement complete all as specified & directed.

Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site complete all as specified and directed.

S&F in repair 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Material & labour Non skid coloured tiles of size 600x600x8-10mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed.

Material & labour non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 including dismantling of old tiles complete all as specified & directed.

Demolition of cement concrete in ground floors and saving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), including taking down old cement plaster including tacking out joints hacking out for key & scrubbing down complete all as specified and directed.

M&L Rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), including taking down old cement plaster including tacking out joints hacking out for key & scrubbing down complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 (using 20mm graded stone aggregate) as in Path/ Plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

M&L three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.

Materials & labour for preparation of newly plastered surface of wall etc and applying two coat of cement base paint, any colour over and including primer to match the existing as required, complete all as specified & directed.

Materials & labour for prepration of old plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper complete all as specified & directed.

Demolition of reinforced cement concrete n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

S&F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe 410-W (Gde?E- 250)complete all as specified and directed.

M&L for in repair 2mm thick fiber glass reinforced transulant plain sheet fixed with and incl catch srew and nut bolts as in sun shade chajjas etc fixed in any position and height complete all as specified and directed.

S&F in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as specified and directed.

Materials and labour for 12mm thick black granite slab (width and length as per site requirement) as in cooking platform, stairs window cill & jambs and like bedded over including 10mm thick rendering in CM 1:4 including making holes and bullnozed moulding on edges and jointed with cement slurry and pointed with white cement with the admixture of pigment to match complete all as specified and directed.

Material and labour for rectifying the leakage of wall mixer/wash hand basin/sink mixer including replacement of brass spindle & PVC washers necessary fixtures etc complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair.

S&F in repair sink mixer with swinging spout (Wall mounted model) complete all as specified and directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L PCC 1:4:8 type D2, 75 mm thick (using 40 mm graded stone aggregate) as in as in sub base of flooring complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F stainless steel sink with draining board, made out of 0.8 mm thick sheet for kitchen with waste pipe, CI cantilever brackets, connecting union over all size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one complete all as specified and directed.

Tayal Builders

jitendra AND Co

vibha associates

M/S ABHI ASSOCIATES

AR Enterprises

H.B. Traders

AEGIS INTERNATIONAL

M/S AGARWAL CONSTRUCTION CO.

SHAKTI CONSTRUCTION CO