SPL REPAIR OF BLDG NO 177A OF 5 TTR AT BAMBOLIM ARMY CAMP, GOA

Amount

Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings.

Dismantling of timber scantling under 40 Sq cm in section in any position as in unframed work fillets, rails, posts, rafters, purlins etc

Taking down wooden roof trusses, coupled rafters or trussed beams clear span above span 8mtrs and upto 12mtrs

Dismantling framed trusses or trussed beams clear span n.exc 10 mtrs

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work.

S&F for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410 -W (GdeE- 250)qualityA

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, .Fe 410 -W (GdeE- 250)qualityA

S&F for Mild steel bolts.purpose made.with hexagonal or square head one end and screwed the other, or screwed both ends;each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long diameter of neck in mm exc 20 and n exc 25

S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc (Fe 410 -W (GdeE- 250)qualityA )

M& L for PCC type B1 1:2:4 (20mm graded aggregate) for Bed block Providing, cement concrete in roof kerbs or mud stops,benching rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; in benching on chajja,parapet wall and sides of wall etc.seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not rovided for watertroughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L for Preparation of New steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and necessary groove cutting in existing walls, including filling of gaps between wall and sheet with CM 1:4, complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and necessary groove cutting in existing walls, including filling of gaps between wall and sheet with CM 1:4, complete all as specified and directed by Engr-in-Charge.

M&L for fix Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and asper direction of Engineer In Charge

M&L for 6mm thick with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mmx600mm grid timber/GI/Aluminium framework with screws complete all as specified and as per direction of Engineer In Charge

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc.

Demolition of brickwork or stone/boulder masonry, built in CM including all quoins arches pillars etc.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 etc

M&L for Laterite stone Walling of squared rubble,regular coursed,well bonded,bedded and solidly hearted,built in CM 1:6 complete all as aspecified and directed.

M&L for Laterite stone Walling of squared rubble,regular coursed,well bonded,bedded and solidly hearted,built in CM 1:4 (except Laterite stone) complete all as aspecified and directed.

Material and Labour for Brickwork with fly ash modular bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for 10 mm thick cement plaster 1:6 on Brick or concrete surface finished even and smooth without using extra cement all as specified

M&L 15mm thick plastering in two layers (10+5) with water proofing compound on fair faces of bricks or concret surfaces finished even and smooth w/o using extra cement in cm 1:4. The plaster shalll be done in two coats of 10mm and 5mm respectively, as directed by Engr-In-Charge. (Water proofing compound will measured and paid separately)

M&L 20mm thick plastering in two layers (10+10) with water proofing compound on stone masonery surfaces finished even and smooth w/o using extra cement in cm 1:4. The plaster shall be done in two coats of 10mm and 5mm respectively, as directed by Engr-In-Charge. (Water proofing compound will measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M&L for Preparing of new plastered surface of walls surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 3mm wall care putty on new surface complete all as specified and directed.

M&L for complete removal of existing surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm including complete removal of existing treatment.

M&L for Preparation of new surface of wall and applying two coat of oil emulsion distemper over coat of alkali resistant primer over 3mm thick wall care putty on internal walls surfaces complete all as specified and directed.

M&L for complete removal of existing surface on internal wall and applying two coats of oil bound distember over and above 3mm wall care putty including a coat of primer all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) etc.complete all as specified and directed.

Taking down chowkat with shutter(without taking off shutter from the frame) area exc 1.5 sqm but n exc 4 sqm each

Supply and Fix for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. Note: The complete fixing and making good of the connected walls shall be completed within 10 days from the start of taking down of existing doors/windows/ventilators.Rs 500/day shall be penalised in case of delay of work beyond 10 days.

Supply and Fix Powder coated aluminium window, doors and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply and fix Figured glass pin head type glazed with oil putty/neoprene rubber in square not exceeding 0.5 sqm in each pane 4mm thick complete all as specified and directed.

Supply and Fix Plain colour PVC sheet of 2mm thickness fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site complete all as specified and directed.

S&F aluminium grills DG-104 of Deco Grill/ Hindal 10 mm thick diamond shape with aperture 10.0cm for windows

S&F Stainless steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ®

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkats of size 45x70 mm complrising of virgin PVC polymer of K value 58-60(Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2, moudules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately. Note : For WPC solid door/window frames minus 5 mm tolerance in demension ie depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkats of size 65x125 mm complrising of virgin PVC polymer of K value 58-60(Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2, moudules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. Note : For WPC solid door/window frames minus 5 mm tolerance in demension ie depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed door shutter of size 30mm thick open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Material and Labour for preparation of Old Painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed.

S&F for Door closer hydraulically regulated,designation No, 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed (aluminium) die cast body.

S&F for Floor door stopper of aiuminium alloy body and tongue with 140mm long cover plate, anodised,with hard drawn steel spring,fixed in floor

S&F for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long.

S & F Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 and fixed 100mm long.

S & F Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 and fixed 75mm long.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm long.

S & F Aluminium handles cast type anodised 150 mm long..

S & F Aluminium handles cast type anodised 125 mm long..

M&L for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. Half brick but not exc one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced).

M & L for 40MM thick Plain Cement concrete 1:2:4 type B-1 (20mm graded aggregate) for base of Kota stone , chequered tile and interlocking flooring etc.

M & L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregates), 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement.

M & L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm th screed bed in CM 1:6.

M&L glazed ceramic coloured designer pattern tiles 350x250x7mm/450x350x7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 as back coat.

M&L for Machine cut kota stone slab flooring 20-25mm thick including 20mm thick screed bed in CM 1:3.over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl Mirror polishing on Kota stone/ stone work where ever required to give high gloss finish incl rubbing and mirror polishing complete etc

M&L for Machine cut kota slab 20-25mm thick in risers of step skirting dado over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Mirror polishing Kota stone/ stone work where ever required to give high gloss finish rubbing including 10mm thick rendering with CM 1:4 and fair faces on brick work or concrete surfaces.

M&L for Mirror polishing on existing marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

M&L for cement concrete type C2 1:3:6 using 40mm graded stone aggregate 75 mm thick as in base of tiles etc.

M&L for 40mm thick sand cushioning under floors/base or in foundations including watering and consolidation with proper camber.

M&L for laying of 80mm thick machine pressed precast conctrete interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006 of M-40 Grade all as specified and directed.

M&L providing cement concrete 1:2:4 type B-1, 20 mm graded agg) as in kerb or mud stops rounded aor chamfered on edges all as specified.

M&L for Endura Industrial tiles 12 mm thick (square/rectangular) area of each tiles exceeding 0.09 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down or up steel tubing and connections including cleaning for refixing or removal to store 15mm bore complete all as specified and directed.

Taking down or up steel tubing and connections including cleaning for refixing or removal to store 20mm bore complete all as specified and directed.

Supplying and laying of 20mm water Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floorscomplete all as specified.

Supplying and laying of 15mm water Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floorscomplete all as specified.

S&F in repair Stop valves 20mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair Stop valves 15mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Dismantling water tanks and removing to store capacity exc 500 Ltr n.exc 1000 Ltr

Dismantling water tanks and removing to store capacity exc 1000 Ltr n.exc 2000 Ltr

S&F for rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR PT I capacity of tank 1000 ltr including Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends & ball brass valves 20mm dia, high pressure, with polythene float and fly nut complete.

S&F for rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR PT I capacity of tank 2000 ltr including Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends & ball brass valves 20mm dia, high pressure, with polythene float and fly nut complete.

S & F for UNDER THE COUNTER wash hand basin in repair, of size not less than 450mm in length/dia including 32mm brass chromium plated waste fittings, brackets, pillar tap swan neck 15mm, PVC connection 15mm size with PTMT nuts of length 450mm including necessory accessories for fitting the same on the underside of the granite slab etc. including PVC waste pipe etc complete all as specified and directed.

S & F in repairs Fancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed bore of pipe 15 mm.

S&F in repair Towel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed. Make : Jaquar ( Code No ASN-1581) or equivalent.

S&F in repair fancy type curtain rod 25mm dia with heavy duty brackets, both of SS 304 grade including stops, rollers etc

S & F PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L for Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in drains, surface channels and the like including weathering, slightly rounded or chamferred angles and throating as directed and provision of necessary form work complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30cm inner girth in celuent concrete, using ex- tra cement, including forms, moulds, mi- tred/ stopped ends etc

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for as directed by Engr-in-Charge

M&L 18-20MM thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces complete all as specified and directed.

M&L for precast RCC 1:2:4 Type B1 using (20 mm stone aggregate) asProviding precast ce- ment concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match all as directed and specified.

M & L for 10mm dia and over TMT steel cut to length, bend to shape and binding with ms wire (annealed) of dia not less than 0.9 mm.

M & L for 5mm dia and over upto and incl 10 mm dia in stirrrups, spacers and binders TMT steel cut to length, bend to shape and binding with ms wire (annealed) of dia not less than 0.9 mm.

S&F in repairs Turbo ventilator with base plate on rooftop with ventilator vanes of Industrial Hi-Grade 8011 H-14 aluminium, weight of 6.5kg +/- 0.2kg, ventilator top plate (dia 500mm +/-5mm) and bottom ring (dia 600mm +/- 15mm) of stainless steel (0.5mm thickness), having following dimensions Height - 410mm +/- 5mm, Centre Width - 735mm +/- 5mm, no. of vanes shall be 42 nos Die pressed with each vane of 0.5mm +/- 0.02mm thickness with 2 nos of bearings of 6001 ZZ permanently lubricated and sealed type. The base plate shall be of E-Glass chopped strand matt (thermosetting polyester resin with hardener (MEKP - AO-9%) and accelerator (Cobalt Octate - 3%)) with profile design customised as per site requirement as specified and directed by Engr-In- Charge. Note: This item includes taking down of existing turboventilator and shall not be paid separately.

M&L for ATT Along the Internal/external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete as directed by Engr-In-Charge

Dismantling cast iron drain pipes of dia 100mm/75mm complete all as specified and directed.

M&L 100 mm thick cement concrete bed 1:4:8 type D2 to 150mm dia of drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;

M&L 150mm reinforced concrete pipes, class NP2, laid and jointed complete with collars

Supply and laying galvanised steel water tubing of medium grade of dia 25mm with and including all fittings such as bends, elbows, tees, unions, niples, short pieces etc as required at site laid in trenches complete all as specified and directed. Note: Excavation and earth work shall be measured and paid seperately under relevant item of Sch 'A'

Supply and fix gun metal gate valve 25mm dia heavy duty ISI marked with iron wheel head screwed both ends for iron pipe with all fittings complete includi all as specified and directed.

M&L for cutting of existing GI tubing of dia 40 mm to 50 mm for alteration or addition or insertion of new tees, branches etc including bends, tapers, tee pieces etc complete all as specified and directed by Engineer-in-charge.

Excavation trenches in Hard dense soil not exc. 1.5m wide and not exc.1.5m in depth all as directed by Engr-in-Charge and getting out hard/ dense soil for laying of cable, foundation etc.and all as per the direction of engineer in charge.

Returning and filling in excavated soil in trenches including spreading leveling watering and well ramming in layers not exceeding 25cm all as specified and directed by Engr-in-Charge .

Removing of excavated materials i.e surplus soil not exc 50M and depositing where directed at a level not. Exc. 1.5M above the starting point and all as per the direction of engineer in charge.

Taking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, bell push,electric bell,ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc completely all as directed by Engr-in-Charge.

M & L for point wiring with 1.5 sqmm (nominal cross sectional area) single core pvc insulated ,unsheathed FRLSH copper cable ,1100 Volt grade with multi stranded copper conductor drawn through and including non-metallic ,rigid non metallic PVC conduit (medium grade) concealed in walls /ceiling with and including 1.5 sqmm single core PVC insulated multistranded ,unsheathed FRLSH copper conductor cable as continous earth continuity conductor (green in colour) with cast Iron/ Pressed Steel modulur terminal boxes any size/module,concealed on walls and fixed by means of brass screw including modular white cover plates and cover frames any size /module and blanck plates, for mounting or housing switches ,socket outlets, fan regulators etc incl all other fixing accesories for one light/fan/exhaust fan/call bell point controlled by one 5/6 Amps switch complete including making good of wall surface by cementing/plastering complete all as specified and directed.

(a) One light point controlled by one way switch.

(b) One fan point controlled by one way switch and one regulator.

(c) One Exhaust fan point controlled by one way switch.

(d) One 3 pin switch socket point outlet 5A on independent board.

(e) One 3 pin socket outlet point 5A on same board with other switch

All as per item No.109.00 above but with cable size 2.5 sqmm for switch socket outlet point 15A on independent board including 2.5 sqmm PVC- FRLSH insulated copper earth continuity conductor to common earth.

S & F modular Switch 1 way 6 Amp, 1 module.

S & F modular Switch 1 way 16 Amp, 1 module.

S & F modular Socket 6A-2/3 pin combined 2 module.

S & F modular Socket 6A/16A -2/3 pin combined 2 module.

S & F modular fan regulator 120 W - 2 module.

S & F surface ceiling rose made of bakelite of size 65mmx50mm with 3 terminals and PVC block. Ceiling rose will be fixed on PVC block complete all as specified and directed

Fixing only, connecting and testing energy meters including all accessories with taking down of old three phase serviceable electric meter

Taking down carefully sub main wiring including aluminium conductor of any size / GI earth continuity conductor and making good disturbed surface all as directed.

Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 4X 6 Sqmm in PVC conduit of 20/25 mm and one run of 6.00 Sqmm copper earth wire including all necessary connections and fixing arrangements complete

Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 6 Sqmm in PVC conduit of 20/25 mm and one run of 6.00 Sqmm copper earth wire including all necessary connections and fixing arrangements complete

Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 4 Sqmm in PVC conduit of 20/25 mm and one run of 4 Sqmm copper earth wire including all necessary connections and fixing arrangements complete

Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 2.5 Sqmm in PVC conduit of 20/25 mm and one run of 2.5 Sqmm copper earth wire including all necessary connections and fixing arrangements complete

Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 1.5 Sqmm in PVC conduit of 20/25 mm and one run of 1.5 Sqmm copper earth wire including all necessary connections and fixing arrangements complete

Supply and fixing LED lights fitting 1x 20W,lumen output >=120 lm/watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fixing for LED luminaire 600 mm x 600 mm, square LED Panel 36 Watt ,lumen output >= 110 lumen/watt , 220 V AC Ceiling mounted type with high effeciency PMMA diffuser soft glare free light complete with driver holder, LED lamp suitable for roof/false ceiling ,including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Eng-in- Charge

Supply & Fixing in repairs decorative LED post top lantern luminaire for 360 indirect light with IP 65 protection with resistant to impact and corrosion,Glare-free and better uniformity , diffuser and painted aluminium reflector 40 watt complete all accessories necessary fitting including connection of 1.5 Sqmm copper conductor cable PVC insulated unsheathed 1100 volts grade , testing before and after mounting for proper function complete all as specified and directed. (Make/ Model:- Crompton,(MAPLE), Cat No . LPTO-40-CDL/M or equivalent make of Bajaj/C&S)

Supply and Fixing LED building security light fitting 30watt 230 V AC outdoor type with hight pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed.

Supply & fixing of cable junction box made of thermoplastic," halogen free, weather proof "(with metric Knockouts for cable entry - Black colour) including one MCB (SP) 6 Amps,230 Volts, four/five pole terminals and cable entry glands for incomming, out going and connection cable with protection grade IP-66/67 of size 250x200x105 mm and suitable for LT under ground cable of size 10-25 sq.mm including bracing clamp,bolts,nuts & washers for outdoor installastion. (Make Hensel/ model No-KF 2525 B / Sintex or equivalent as approved)

Supply & Fixing PVC copper cable 3-in core of size 1.5sq mm for junction box to gate light fitting connection complete all as specified and directed.

Supply and laying Gl pipe light grade 40 mm bore in trenches, under floors, roads, along poles for protection of cables with all necessary fittings and sealing ends complete all as specified and directed.

Supply and fixingof GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed.

Taking down with dismantling old Main Switches/DB with MCBs all as specified and directed

Supply and fix sheet metal enclosure double door, vertical type for DB’s when MCCB’s to be used as incomer including MCCB 100 Amp triple pole and neutral 4 ways IP 43,IK 09, 415 volts with 200amps rated bus bar fixed sunk/ flush to wall by cutting the brick/stone masonary etc & taking down of unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed.Note:- The space left after inserting MCB should be properly filled with blanking plate

S & F for Sheet Metal Enclosure MCB DB TPN 4 Way, IP 43,IK 09, with 200 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in Wall by cutting the brick/stone masonary etc & taking down of unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed.Note:- The space left after inserting MCB should be properly filled with blanking plate

Supply and fix for MCB Triple Pole & neutral rated capacity 40 to 100Amp,415 Volts10KA breaking capacity 10 KA , 'C' curve connected with suitable lugs complete all as specified and as directed.

Supply and fix SPN 8 way double door metallic sheet metal enclosure for DB when MCBs to be used 240 Volts with 100Amps rated bus bar complete fixed properly on/ in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires including blank plate complete all as specified

Supply and fix MCB SP 240volts, 6Amp to 32Amp, 10KA capacity having C-series connected with suitable lugs including testing and commissioning complete all as specified and as directed.

All as per Item no. 142 above but SPN 32 Amp

Taking down ceiling fan, of any size including blade in any position including re-fixing where directed including provision of 3 core flexible cable of suitable size, and cleaning, greasing where required and testing after completion all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers including 4 Nos of Fasetner as required at site including making opening, Civil work ,Painting etc. all as specified and directed by Eng-in-Charge.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm dia bar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick and writing of earth results with paint complete all as shown in electrical plate No. 5 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

OM INFRA (BID ID -3489106)

vishalconstruction (BID ID -3486262)

M/s S N Atiwadkar (BID ID -3485901)