REPAIRS MAINTENANCE REPLACEMENT OF FLAME PROOF LIGHTS ACs WATER COOLERS AND VARIOUS COOLING APLIANCES AT VARIOUS LOCTAION UNDER AGE EM II IN GE CENTRAL KIRKEE.

Amount

M&L PVC insulated, PVC sheathed, flexible cable with multi stranded copper conductor of size 2.5 sq.mm 3 core all as specified and as directed.

Dismantling and taking down unserviceable existing any light fittings /flame proof fittings of any size and capacity from any location/height after disconnecting of electrical connectionc complete including all connected accessories all as specified and as directed.

M&L LED light fitting 2x16 Watt, flame proof, CMRI certified and recommended for gas/ vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures, driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable accessories ALL AS PER Crompton Cat No. EXTN2LT8-16/20 or techno commercially equivalent models in Phillips / Bjajaj complete all as specified and as directed.complete all as specified and as directed.

M&L Flame proof, weather proof, flood light fittings 60 watt LED with die cast aluminium having with heat resistance toughened glass IP 65 protection all as per Crompton Cat No. FWL1315-60CDL or techno commercialy equivalent modelsin Phillips / Bjajaj complete all as specified and as directed.

M&L Recessed mounting light fitting 36 Watt, LED (4 feet X 1 feet) with powder coated CRCA housing in built up electronic LED driver having heat resistance, IP 20 protection with complete acessories all as per Bahah Cat No:- BZRSLL 36 W WH LED or techno commercially equivalent models in Philips /Wipro/Crompton all as specified and directed. NOTE:- Quoted rate is deemed to be inclusive any miscelleneous materials required for fixing new luminaries.

M&L in repair Copper piping 5/8" (18/20 gauges) with necessary fittings such as elbow, bends, sockets and tee's, clamps and supports on wall and ground complete all as specified and directed.

M&L in repair Copper piping 1/2" with necessary fittings such as elbow, bends, sockets and tee's, clamps and supports on wall and ground complete all as specified and directed.

M&L in repair Copper piping 1/4" with necessary fittings such as elbow, bends, sockets and tee's, clamps and supports on wall and ground complete all as specified and directed.

M&L Superlone insulation suitable for copper piping 5/8" with necessary fittings such as elbow, bends, sockets and tee's, clamps and supports on wall and ground complete all as specified and directed.

M&L Superlone insulation suitable for copper piping 1/2" with necessary fittings such as elbow, bends, sockets and tee's, clamps and supports on wall and ground complete all as specified and directed.

M&L Superlone insulation suitable for copper piping 1/4" with necessary fittings such as elbow, bends, sockets and tee's, clamps and supports on wall and ground complete all as specified and directed.

Labour only for shifting of split type air conditioner and fixing of air conditioner at specified location complete all as specified and as directed.

Labour only for Core cutting / drilling /chase cutting of wall up to 18 inch suitable for split type AC as per site requirment all as specifid and as directed.

Labour only for Disconnecting split / window type AC (Out door+Indoor unit) 1.5 / 2 TR capacit, electrically / mechanically and lowering to the ground fixed in any position for servecing / repairing / overhauling / cleaning, and cleaning filters, checking of electrical wiring, cleaning of dust by blower and washing with washing soda including replacement of unserviceable, burnt out spare parts to make it fully functional, after repairs re-installation and testing on full load completion to the entire satisfaction of Engr-in-Charge including transporting to workshop and back to site complete all as specified and as directed. NOTE:- Items replaced will be measured and paid separately.

M&L Cleaning gas system of split AC/Window type AC with carbon tetra chloride chemical and flushing with Nitrogen and charging the gas ( Refrigerant R-22) including brazing/testing and commissioning complete of size 1.5/2 Ton capacity all as specified and as directed.

M&L Cleaning gas system of split AC/Window type AC with carbon tetra chloride chemical and flushing with Nitrogen and charging the gas ( Refrigerant R-32) including brazing/testing and commissioning complete of size 1.5/2 Ton capacity all as specified and as directed.

M&L Cleaning of gas system of the water cooler/ refrigerator with carbon tetra chloride chemical and flushing with Nitrogen and charging the gas ( R-134) including brazing/testing and commissioning complete of capacity 40/80/100/120 ltrs all as specified and as directed.

S&F in repairs unserviceble and damaged burnt blower motor/fan motor of window / split AC of capacity 1/6 HP complete all as specified and as directed.

S&F in repairs unserviceble and damaged burnt blower motor/fan motor of window / split AC of capacity 1/4 HP complete all as specified and as directed.

S&F in repairs unserviceble and damaged burnt blower motor/fan motor of water cooler of capacity 1/8 HP complete all as specified and as directed.

S&F in repairs and damaged burnt blower motor/fan motor of water cooler of capacity 1/3 HP complete all as specified and as directed

S&F in repairs and damaged burnt blower motor/fan motor of water cooler of capacity 1/2 HP complete all as specified and as directed

Labour only Disconnecting water cooler of 60 / 40 / 80 / 100 / 120 Ltr capacity electrically / mechanically, repairing / overhauling / cleaning, checking of electrical wiring, cleaning of dust by blower including replacement of unserviceable, burnt out spare parts such as relays thermostates etc to make it fully functional, after repairs, re-installation and testing on completion to the entire satisfaction of Engr-in-Charge including transporting to workshop and back to site complete all as specified and as directed. NOTE:- Items replaced will be measured and paid separately.

S&F in repairs Micro processor printed circuit board complete suitable for split type AC of 1.5/2 TR capacityas per existing make/model and capacity 1.5/2 Ton complete all as specified and as directed.

Disconnecting and taking out old defective, hermetically sealed compressor unit required for AC/water cooler/refrigerator, supply and fixing in repairs new compressor (new sealed unit only) with nut, bolt, washers, antivibrating bush, brazing work, pressure testing for leakage, vaccumising and gas charging etc of capacity 1.5 TR for window/Split AC of the existing makes of Voltas/Hitachi/Emersion/ Carrier /Shriram(Techmesh) complete all as specified and as directed

All as per Sl Item No. 25 above but of capacity 2 TR for window/split AC.

All as per Sl Item No. 25 above but suitable for Water cooler of capacity 40ltrs.

All as per Sl Item No. 25 above but suitable for Water cooler of capacity 60ltrs.

All as per Sl Item No. 25 above but suitable for Water cooler of capacity 80ltrs.

All as per Sl Item No. 25 above but suitable for Water cooler of capacity 100/120ltrs.

S&F in repairs thermostate suitable for water cooler/ refrigerator/ AC of any type and any model complete all as specified and as directed.

S&F in repairs overload protection relay for window AC, water cooler and refrigerator of make and model as existing complete all as specified and as directed.

S&F in repairs starting relay for window AC, water cooler & refrigaretor of make and model as per existing complete all as specified and as directed.

S&F in repairs running capacitor 10 MFD complete all as specified and as directed.

S&F in repairs running capacitor 25 MFD complete all as specified and as directed.

S&F in repairs running capacitor 36 MFD complete all as specified and as directed.

S&F in repairs running capacitor 40 / 45 MFD complete all as specified and as directed.

S&F in repairs starting capacitor 60 MFD complete all as specified and as directed.

S&F in repairs starting capacitor 80 /100 MFD complete all as specified and as directed.

S&F in repairs starting capacitor 120 MFD complete all as specified and as directed.

S&F in repairs PVC float valve of size 15mm dia suitable for water cooler of any type complete all as specified and as directed.

S&F in repairs drier filtter suitable for AC / water cooler / refrigaretor complete all as specified and as directed.

S&F in repairs capillary tubing of any size not less than 0.5 mtr length suitable for AC/ water cooler/refrigerator complete all as specified and as directed.

S&F in repairs PVC drain pipe suitable for water cooler out let of any capacity complete all as specified and as directed.

S&F in repairs 3 pin plug top of capacity 15 Amps complete all as specified and as directed.

S&F in repairs Copper condenser unit assembly for window AC with all accessories complete of capacity 1.5/2 ton complete all as specified and as directed.

S&F in repairs suction valve for split AC of any capacity complete all as specified and as directed.

S&F in repairs PVC drain pipe suitable for split AC out let of 1.5T/2.T capacity complete all as specified and as directed.

S&F in repairs discharge valve for split AC of any capacity complete all as specified and as directed.

S&F in repairs rubber gasket for lid top of any size for water coolers complete all as specified and as directed.

S&F Hermetically sealed unit of new compressor including dismantling burnt out un serviceable compressor suitable for refrigirators of 165 - 200 ltr capacity, with bushes, sleeves, washers nut and bolt for compressor, foundation legs, relay terminal cover clips, including cutting, brazing, leak detection, charging refrigerent gas, commissioning and testing complete all as specified and as directed.

M&L Disconnecting electric connections, removing / transporting the un serviceable water cooler of capacity 40 ltrs to 120 Ltrs to workshop for painting work which includes removing the existing deteriorated / rusted body for paint by scrapping and filling of cavaties with filler spray, denting/ welding, patch work with existing size of MS sheet and painting the body with synthetic enamel paint two coats over a coat of redoxide primer and marking the SM/MES No (of required size and shape) with black paint complete all as specified for as directed.

Dismantling of existing unservicebale voltage stablizer and S&F in repairs of relays, electronic voltage sensor circuit and meter, micro switch, indication light, RC filters and other connected items for making functional and rewinding of unserviceable transformer with super enameled copper wire of appropriate size, varnishing assembling and testing complete of capacity 2 KVA to 5 KVA upto satisfactory function of any capacity all as directed by Engr- in-Charge.

S&F in repairs Heavy duty air conditioner outdoor unit stand/ brackets with complete accessories suitable for windos/split AC of capacity of 1.5/2 Ton complete with grouting nut, bolts all as specified and as directed.

S&F in repairs copper condenser unit assembly for outdoor unit with all accessories suitable for split AC of capacity 1.5/2 ton complete all as specified and as directed.

Dismantling of old split type air conditioner indoor unit, supply , installation and testing Indoor unit of split type air conditioner complete with cordless remote control and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 Ton with wall mounted fixing plate suitable size including brazing work for fixing existing site complete all as directed. MAKE:- Voltas / LG / Blue star

Disconnecting and taking down unserviceable / damaged outdoor unit cover of split air conditioner of capacity 1.5 Ton and dismantaling of compressor, condenser unit, wiring, fan motor from outdoor cover and supply and fixing in repairs new outdoor cover including unserviceable spare parts such as capacitor, control wiring and refixing compressor, condenser unit, wiring, fan motor to make it fully functional, after repair and re-installation as per existing and testing on completion to the entire satisfaction of Engr-in-Charge. NOTE:- Items as declared unservicable by Engineer in charge shall be replaced and shall be deemed to be included in quoted rate.

M&L in repairs Sub main wiring of two single core FRLS-H PVC insulated unsheathed stranded copper conductor cables of size 4 sq.mm, 1100 volts grade, drawn through and including 20 mm dia PVC surface conduit of 1.2 mm wall thickness including fixing all accessories and 4 sq.mm PVC insulated stranded copper conductor cable as earth wire connected to earth dolly complete all as specified and directed. NOTE:- Both running cables including earth wire including one run PVC conduit pipe shall be measured and paid for as single length.

M&L in repairs Sub main wiring of two single core FRLS-H PVC insulated unsheathed stranded copper conductor cables of size 6 sq.mm, 1100 volts grade, drawn through and including 20 mm dia PVC surface conduit of 1.2 mm wall thickness including fixing all accessories and 6 sq.mm PVC insulated stranded copper conductor cable as earth wire connected to earth dolly complete all as specified and directed. NOTE:- Both running cables including earth wire including one run PVC conduit pipe shall be measured and paid for as single length.

S&F in repairs MCB 240 Volts conforming to IS of rating 6A to 32A SP, 'C' Series, 10 KA breaking capacity complete all as directed by Engr-in-Charge.

S&F in repairs Sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket complete with one No MCB SP, 20 Amps , 230 volts complete all as specified and as directed.

Taking down carefully existing unserviceable aluminum / copper point wiring of any description & in any position with and including existing steel conduit / PVC conduit / casing caping fixed on surface / wall / angle / girder and including all fittings, accessories and fixtures such as switches, ceiling roses, pendants, regulators, sockets, including sunken boxes/junction boxes and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed.

M&L Point wiring in PVC coduit of suitable size but not less than 20mm dia including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sq.mm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sq.mm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and including PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same to match with the existing wall all as specified and as directed.

All as per Sl Item No 64 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches.

All as per Sl Item No. 64 above but point wiring for 5 pin socket outlet, 5 Amps on independent board.

All as per Sl Item No. 64 above but point wiring for one five pin socket outlet, 15 Amps & 5 Amps on independent board using 2.5 sq.mm two run and one run 2.5 sq.mm (nominal area) stranded copper conductor cable.

M&L Point wiring in casing and caping of suitable size but not less than 20mm size including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sq.mm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sq.mm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and including PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same to match with the existing wall all as specified and directed by Engineer in charge.

All as per Srl item No 68 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. Size.

All as per Srl item No 68 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches.

All as per Srl item No 68 above but point wiring for 5 pin socket outlet, 5 Amps on independent board.

All as per Srl item No 68 above but point wiring for one five pin socket outlet, 15 Amps & 5 Amp on independent board using 2.5 sqmm two run and one run 2.5 sqmm (nominal area) stranded copper conductor cable.

M&L Point wiring for one light/ fan/ bell point controlled by one switch in steel conduit with all steel enamelled fittings such as elbow bends, junction boxes, supporting clamps for proper hanging arregements made out from 20x1mm flat aluminium patti including nuts, bolts and bending to shape etc. of appropriate size but not less than 20mm on surface with two run of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sq.mm nominal cross sectional area 1100 volts grade and including one run of 1.5 sq.mm (green colour) PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire including suitable size sunken type Galvanised pressed sheet steel 1.6 mm thick terminal box with 3 mm thick laminated hylum sheet for mounting switches, sockets etc. and making good the disturbed wall and painting to matchwith the colour of the existing wall, l all as specified and as directed.

All as per Srl item No 73 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches.

All as per Srl item No 73 above but point wiring for 5 pin socket outlet, 5 Amps on independent board.

All a s per Srl item No 73 above but point wiring for one five pin switch socket outlet combination, 15 Amps & 5 Amp (independent) with using 2.5 sqmm two run and one run 2.5 sqmm (nominal area) stranded copper conductor .

S&F in repairs Switch flush type, 5 Amps, single pole, one way , 230 volts AC circuit complete all as specified and as directed.

S&F in repairs Bell push flush type, 5 Amps, 230 volts AC circuit complete all as specified and as directed.

S&F in repairs Socket outlet, five pin, 5 Amps, flush type, multipurpose, 230 volts AC circuit complete all as specified and as directed.

S&F in repairs Switch flush type, 15 Amps, single pole, one way , 230 volts AC circuit complete all as specified and as directed.

S&F in repairs Socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type 230 volts AC circuit complete all as specified and as directed.

S&F in repairs Ceiling rose PVC/polycarbonate, isolated body, three terminals, complete all as specified and as directed.

S&F in repairs stepped type electronic fan regulator, flush type, suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100Watt complete all as specified and as directed.

Dismantling and taking out old unserviceable copper/aluminium sub main wiring /un armoured cable (used as sub main wiring) from any height of any Size and Core with all connecting accessories including conduit or casing caping and making good to the disturbed wall and painting the to match with the existing wall including material all as specified and as directed.

M&L Sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 2.5 sq.mm, 1100 volts grade conforming to IS drawn through and including New 20 mm dia steel conduit and including one single core PVC insulated multi stranded unsheathed copper conductor cable, 2.5 sq.mm FRLSH green in colour as contineous earth wire including all accessories and fixing arrengements, supporting clamps, bends, sockets and connecting items etc. all as specified and as directed.

M&L Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 4.0 Sqmm, 1100 volts grade, drawn through and including casing caping including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 4.0 sqmm, 1100 Volts grade,,green in colour as earth contuinity wire all as specified and directed.

M&L Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 6.0 Sqmm, 1100 volts grade, drawn through and including casing caping including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 4.0 sqmm, 1100 Volts grade,,green in colour as earth contuinity wire all as specified and directed.

Dismantling and taking down unserviceable existing light fittings 1 x 20 Watt / 2 x 20 Watt/ any fitting other wattage of any size and capacity from any location/height after disconnecting of electrical connection complete including all connected accessories all as directed by Engr-in-Charge.

S&F Industrial box type batten with precoated CRCA body. LED tube light fitting suitable for and including 1x20 Watt 4 feet long tube with polycarbonate diffuser, LED lamp efficacy -110 Lum/W ,THD ≤15% with operating voltage range 100-300V, driver efficiency >85%, surge voltage withstand 2.5 KV, power factor ≥0.9 all as per Crompton Cat No. LT8-20-865 or techno commercially equivalent models specified in PS including connecting with copper conductor flexible twisted three core cable with all accessories for fixing on steel trusses / false ceiling including dismantling of old fittings all as specified and as directed.

S&F LED luminarie made up of precoated CRCA housing provided with reflector finished in white powder coating, completely prewired with accessories up to terminal block suitable for 2x 20 Watt, 4 feet long LED tubes(high lumen-110 lumen/Watt) and including connecting with copper conductor flexible twisted three core cable and fixing arrangements for fixing on steel trusses / false ceiling all as per Crompton Cat no-IGP162LT8-16 & LT8-20-865 or techno commercially equivalent models in Phillps / Havells. NOTE:- Stove enamelled black steel conduit or chain, conduit fittings, bell mouthed threaded sockets and any miscelleneous materials required for fixing new luminaries is deemed to be included in the quoted rate.

S&F LED batten with 20 Watt LED light source in integral module with polycarbonate / acrylic diffuser more than 85% efficiency of light with LED lamp efficay as 110 Lum/W THD ≤15% with operating voltage range 100-300V, driver efficency >85%, surge voltage withstand 2.5 KV , power factor ≥0.9, connected with copper conductor flexible twisted three/ two core cable all as per Crompton Cat No. LCTLN-20-CDL or techno commercialy equivalent modelsin Phillips / Bjajaj complete all as specified and as directed. complete all as specified and as directed. NOTE :- Quoted rate is deemed to be inclusive of any miscellanoeus materials required for fixing new luminaries.

S&F in repairs MCB SPN DBs of 8 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 and made of high quality CRCA sheet having integrated door earthing system, shall have reversible door facility, with Insulated busbar to withstand capacity of 10KA, shrouded neutral bar, door earthing, corner Safe, wiresets, shrouded Neutral bar, earth bar & wire ties, all as per Legrand Cat.No. 507611 or techno commercially equivalent modela in Schneider/L&T complete all as specified and as directed.

S&F in repairs MCB SPN DBs of 12 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 and conforming to IEC 61439-3 and made of high quality CRCA sheet having integrated door earthing system, reversible door facility, with insulated busbar to withstand capacity of 10kA, shrouded neutral bar, door earthing, corner safe. wire sets, shrouded Neutral bar, earth bar & wire ties, all as per Legrand Cat.No. 507612 or techno commercially equivalent modela in Schneider/L&T complete all as specified and as directed.

S&F in repairs MCB 6 to 32 Amps, single pole and neutral, "C" curve 10 KA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed. MAKE: - Legrand/ABB/L&T/ Seimens.

S&F in repairs MCB 6 to 32 Amps, single pole, 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, complete all as specified and directed. MAKE: - Legrand/ABB/L&T/ Seimens.

S&F in repairs Gate light fittings, decorative type, LED 45Watt, all as per Crompton Cat No: LPTOI-45-CDL or techno commercially equivalent models in Philips /Bajaj/ Havells/surya including all fixing materials on gate posts complete and connected to nearest electric pole all as specified and as directed.

S&F in repairs Gate light fittings, decorative type, LED 40 Watt, all as per Crompton Cat No: LPTC-40-CDL or techno commercially equivalent models in Philips /Bajaj/ Havells/Surya including all fixing materials on gate posts complete and connected to nearest electric pole all as specified and as directed.

S&F in repairs LED bollard light fittings, with LED 10 Watt, all as per Crompton Cat No: Cat No: LBLSN-10-CDL or techno commercially equivalent models in Philips /Bajaj/ Havells/suryaincluding all fixing material, earth work and foundation complete and connected to nearest electric pole all as specified and as directed.

Removing of old HPMV / MH high bay light fittings at 12 to 15 mtr height carefully without dammaging connector or ceiling rose. If any damage made to the government property, the same shall be repaired by the contractor without any extra cost all as specified and as directed.

S&F 150 Watt Industrial LED highbay luminaire with >120Lm/Watt, powder coated PDC Aluminium body & PC optical lense with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, internal surge protection-4KV & external surge protection-10KV, LED Source including safety chain with i bolt fixing at 5 to 9 mtr height, connected with and including 1.5 sq.mm, three core cable from connector or ceiling rose to light fitting complete all as per Crompton Cat No. LHB11-150-CDL/60-HPM or techno commercially equivalent models in Phillips / Bjajaj all as specified and as directed. NOTE :- The quoted rates are deemed to be included the cost of nut, bolts, washers or clamps required to be replaced, if old one are found unserviciable or of different size/shape for completion of work

Dheer Engineering

M/S. OM ENTERPRISES

BRILLIANT AIRCONDITIONING AND REFRIGERATION WORKS