REPAIR TO CANING TO CERTAIN WOODEN FURNITURE AT CME UNDER GE (CME) KIRKEE

Amount

Taking down carefully unserviceable parts of various items of furniture listed here-in-after and supply and fixing parts made out of teak wood (first class hard wood) complete in following situation all as specified and shown on drawing including scraping out old polished surface & polishing the wooden surfaces with two coats of french polish, as directed by Engineer-in-Charge.

Bed plywood [Drg No. FD-246 / 247 ]

12 mm thick commercial plywood BWR grade.

Head Board complete

Foot Board complete

3 mm ply for Foot board

3 mm ply for head board

Long rail

Short rail

Wooden Bracket

Chair writing [Drg No. FD-280 / 202/250/20 ]

Rear legs

Front legs

Side rail with proper holes for caning

Stiffner Centre

Stiffner side

Back Rest

Brackets

Chair dining [Drg No. FD-279 / 228 16 / 220 / 227 ]

Rear legs

Front legs

side rail with proper holes for caning

Stiffner

Back Rest

Wooden Brackets

Chair Easy FD [Drg No. FD-229 / 201 / 17 ]

Rear legs

Front legs

Side rail with proper holes for caning

Back Rest

Wooden Brackets

Peg Table [Drg No. FD-277 / 384 / 273 ]

Long rail

Short rail

Brackets

Top 18mm/19mm prelaminated particle board one side white and other side teak wood finish lamination, with 4mm thick teak wood beading for top all-around as per drawing

Table Writing [Drg No. FD-275 / 33 / 249 ]

Long rail

Short rail

Top 18mm/19mm prelaminated particle board one side white and other side teak wood finish lamination, with 4mm thick teak wood beading for top all-around as per drawing

Table Centre [Drg No. FD-271 / 235 / 29 ]

Long rail

Short rail

Wooden brackets

Top 18mm/19mm prelaminated particle board one side white and other side teak wood finish lamination, with 4mm thick teak wood beading for top all-around as per drawing

Teapoy [Drg No. FD-34 / 232 / 278 / 362 ]

Long rail

Short rail

wooden Brackets

Top 18mm/19mm prelaminated particle board one side white and other side teak wood finish lamination, with 4mm thick teak wood beading for top all-around as per drawing

Table Dressing Gents [Drg No. FD-230 / 370 ]

6mm plywood for back side of mirror portion

Replace of Mirror. Make Atul / Modi / Golden fish complete

Drawer with knobs as per drawing

Table 3' x 2' with out drawer [Drg No. FD-41 / 283 / 224 ]

Long rail

Short rail

Stiffner

Top 18mm/19mm prelaminated particle board with exterior grade one side white and other side teak wood finish lamination, with 4mm thick teak wood beading for top all-around as per drawing

Wooden Brackets

Drawer with knobs

Chair dining cushioned [Drg No. FD-6 / MAP / 10 R (MAP) ]

Rear legs

Front legs

Wooden brackets

Stiffner

Removing old existing unserviceable cushion foam with tapestry cloth / rexine from seat of chair.Supply and fix new foam cushion of 32 density and 50 mm thick with high quality rexine cloth cover. The rates of rexine cover should not less than 160/- mtr. Color of rexine cloth as directed by Engr-In- Charge

Table Dining 6 Persons [Drg No. FD-376 ]

Long rail

Short rail

Top 18mm/19mm prelaminated particle board one side white and other side teak wood finish lamination, with 4mm thick teak wood beading for top all-around as per drawing

Bracket 75x75x25mm

Table Dressing Ladies [Drg No. FD-230 / 379 ]

6mm plywood for back side of mirror portion

Replace of Mirror. Make Atul / Modi / Golden fish complete

Drawer with knobs as per drawing

Table Dining 4 Persons [Drg No. FD-376 ]

Long rail

Short rail

Top 18mm/19mm prelaminated particle board one side white and other side teak wood finish lamination, with 4mm thick teak wood beading for top all-around as per drawing

Bracket 75x75x25mm

Removing unserviceable plastic cane from chairs of any type (except chair verandah), cleaning cane holes and recaning with 2mm wide new plastic semi-circular cane, cream colour and borders 3.5mm wide new plastic cane of approved quality all as specified & directed.

Chair dining FD 279/ 228

Chair writing [Drg No. FD-280 / 250]

Chair Easy [Drg No. 229/ 201]

stool dressing

Desk student steel [Drg No. FD-1021]

Removing of old UNSV particle board top and bottom and back alongwith both sides of desk student steel. S&F new top and bottom and back alongwith both sides of desk student steel of pre laminated particle board of 18/19 mm thick of exterier grade, one side teak face and other side white along with 4 mm thick teak wood beading all round duly french polished and suitable screw as in original to fix or as directed by Engr- In- Charge.

M&L for removing of old unsv broken / damaged mirror of table dressing gents. S&F new mirror of 5 .5mm as per drg or as directed by Engr - In- charge. Make Modi / Goldenfish/ Atul [Drg No. FD/E6/MAP/16]

Removing of old UNSV broken / damaged openable glass shutter with hinges and magnetic catcher and stainless steel fitting for glass shutter for Trolly for TV. S&F new glass shutter 5mm openable glass shutter with steel hinges and magnetic catcher and stainless steel fittingfor glass shutter . Glass shutter to be provided in two equal shelves ( double hung) openable on either side with two nos stainless steel hinges in each side and one no. magnetic catcher for each shutter at centre of TV trolly as per drg or as diredcted by Engr-in- charge . [Drg No. FD/E6/MAP/04(R) ]

Removing of old unsv 18/19 mm thick particle board shutter of Bin linen multipurpose. S&F New 18/19 mm thick particle board shutter with 4 mm thick teak wood beading all round, with two nos hinges of each shutter with knobs / handle as per drg or as directed by Engr-In- charge. [Drg No. FD/E6/MAP/09]

Removing of old unsv 18/19 mm thick particle board drawers of Bin linen multipurpose. S&F New 18/19 mm thick particle board drawers with 4 mm thick teak wood beading all round, with one nos knobs / handle as per drg or as directed by Engr-In- charge. [Drg No. FD/E6/MAP/09]

Removing of old unsv18/19 mm thick particle board side panel of Bin linen multipurpose. S&F New 18/19 mm thick particle board side panel with 4 mm thick teak wood beading all round, as per drg or as directed by Engr-In- charge. [Drg No. FD/E6/MAP/09]

Removing of old unsv 6 mm thick back side ply wood BWR grade of Bin linen multipurpose. S&F New 6 mm thick back side ply wood BWR grade, as per drg or as directed by Engr-In- charge. [Drg No. FD/E6/MAP/09]