SPL REPAIR TO ROAD AND ROAD SIDE FURNITURE FROM SUBHASH CHOWK TO GWALIOR ROAD AND CERTAIN INTERNAL PORTION OF COD UNDER GE (W) AGRA

Amount

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed

M&L for applying evenly a tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sqm over the prepared surfaces by mechanical sprayer complete all as specified and directed.

M&L for preparing WBM surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, Applying evenly a tack coat of paving bitumen VG-10 @ 10 kg per 10 Sq meters complete all as specified and directed.

M&L for premix bituminous macadam n exc.75 mm consolidated thickness or less using binder content 4% by weight of total mix(using paving bitumen VG 30 Grade) including cement filler, mix in hot mix plant using design mix and laid and rolled and compacted to required camber and gradient with 8 to 10 tonne power road roller complete all as specified and directed

M&L for repair to potholes any depth, not exc one sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal & other required material) complete all as specified and directed.

M&L for laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, (Paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power road roller to required camber and gradient complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted lower side of binder used however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A'

Scarifying or picking gravelled, macadam or bituminous macadam surfaces n'exc 50mm deep in area n.exc 400 sqm complete all as specified and directed.

M&L 150 mm thick (spread thickness) soling with broken boulders or quarried stone.interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.

M&L for 150 mm thick (compacted thickness) WBM in two layers, (each layer 75mm thick) with coarse stone aggregate of sand stone flint or quartzite of grading 2 (63 mm to 40 mm size) spread rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.

M & L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.5mm thick single coat as a arrow dashes, letters etc, on road or paving with using retro reflective thermoplastic road marking paint of approved make applied with machine all as per manufacture instruction including preparation of surfaces complete all as spd and directed

M & L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.5mm thick single coat as a centre line or edge line etc , road marking of 150/100mm width using "HOT MARK"thermo plastic paint (Hot application) white / yellow by indgenous modern propelled road marking machine as directed incl all ingredients such as binder , glass beads, titanium dioxide, calcuim carbonate, inter filler etc, thermoplastic required for glass beads shall be confirmed to BS-6086 of MOST/OSCAR specification incl spraying of glass beads etc complete all as per manufacture's instructions complete all as specified and directed.

S&F in repair two way solar blinking Cat Eye’s (road stud) of size 125mmx125mmx25mm, 6 LEDs with stem fixed with chemical as as per manufactureres instructions complete all as specified and directed

S&F in repair plastic speed bump of ABS material speed breaker /rubber rumbler of size L 750mm XW 350mmx H 75mm fixed with metalic bolt suitable size embeded in epoxey as per manufactuere's instruction complete all as specified and directed

S&F in repairs road side convex mirror of size 24" (Material polycarbonate) and ht of MS pipe 1.5m and dia 50mm embeded with PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) (size 0.5x0.5x0.5m) incl RFR and removal excavated soils with in different location complate all as specified and directed.

M/s J S & SONS

M/S SUNNY ASSOCIATE

Attar Singh and Sons

Gupta Automobiles

M/s M S Sharma and Co.