REPAIR TO INTERNAL ROADS OF 269 ENGR REGT AND 262 CEDU KLP AT CME UNDER GE (CME) KIRKEE

Amount

M&L for Scarifying or picking up gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and depth exc 50mm and n.exc 100mm complete all as specified and as directed.

M&L for 100mm thick (Compacted thickness) wet mix macadam (WMM) laid in single layer as per MORTH specification, using crusher broken graded stone aggregates , spread, rolled and consolidated to required gradient and camber using mechanical pver/grader and tondom vibratory roller/earth compactor of capacity 8 ton to 15 ton or compaction at to achive the mn 98% density of MDD determined using modified proctor density determination method as per IS Code laid in layers of consolidated thickness complete as specified and directed

All as per Item No 2 above but except material (serviceable material obtained from Item No 1 shall be used under this item).

M & L Repairs to pot holes any depth n,exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc, cutting around edges atleast 25mm in depth, making good by applying tack coat @ 5Kg per 10Sqm of paving bitumen (VG-30), putting in premix bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm of paving bitumen, blinded with o.09 cum of stone chippings 6.3mm size and again well rammed(including supply of premixed macadam binder and chippings) depth of pot holes exceeding 30mm

M &L Preparing unsurfaced WMM surface by brushing with wire brush for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc and for applying evenly a tack coat with bituminous emulsion RS-1 @ 7.5 kg per 10 Sqm with sprayer over existing surface etc complete all as specified and directed. Make : HINCOL or equivalent

M & L Premix bituminous macadam with 4% binder content using paving bitumen) by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less). Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site.

M & L for applying evenly a tack coat with bituminous emulsion RS-1 @ 2.5 kg per 10 Sqm with sprayer over bituminous macadam etc complete all as specified and directed. Make :- HINCOL or equivalent as approved by GE.

Preparation of existing black top surfaces by brushing with wire brushes and removing caked mud etc sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dirt applying evenly a tack coat with bituminous emulsion RS-1 @ 5 kg per 10 Sqm with sprayer over bituminous macadam etc complete all as specified and directed. Make :- HINCOL or equivalent as approved by GE. etc. all as specified and directed by Engr-in-charge.

M&L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site.

M&L for preparation of New/existing black bituminous road/concrete surface and painting lines dashes (continuous/interrupted), arrows,letters etc on road 2.5 + 0.5mm thick and n. exc 10cm wide with one coat of hot applied white /golden/yellow auto retro-reflective thermoplastic road marking paint with reflectory glass beads on bituminous road all as specified in clause 803.40 of MOSRT&H specification over a coat of self primer using special applicator machine as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed.

M&L Moorum/Red bajri, spread, rolled and consilidated to required gradient and camber (Spread thickness 100mm (average) all as specified and directed by Engr-in-Charge

S&F in repairs Cat Eyes duel directional Glass beads reflector body material ABS plastic size 117mmx117mmx23mm reflector 19 or 21 Bi convx glass element on each side compressive strenght upto 35 tons. Colour body yellow colour with ref reflector as per sample approved by GE etc, complete all as specified and directed.

S&F in repair solar stud made out of casting with 3 LEDs on each side fixed wth expoxy compound includind cleaning of existing surface as per sample approved by GE etc complete all as specified and directed.

S&F in repairs tubular delineator made out of 100mm bore GI pipe medium grade with total height of 900mm, black colour powder coated, Hi intensity reflective taping at top and three bands of 25mm width white reflective tape on pipe. Metal jali to protect Hi density reflective taping and fixing with and including excavation in post holes in hard/dense soil, filling of mass concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundation (0.3mx0.3mx0.4m), removal of surplus soil and making good existing surface complete all as directed.

S&F in repairs road safety Convex Mirror model No OS-790 from OSCAR safety soluctions or other equivalent make asper list of makes 80 CM dia, including fixing and anchoring complete one all as specified and directed

S&Fin repairs for ABS speed breaker of size 350x250x50mm PVC Road Hump Pack of 3.00 Rm (6 Black and 6 yellow Breakers) incl fixing with expoxy compound and anchoring with nails complete all as specified and directed.

S & F in repairs Sign board of size 150 x 100 cm made out of ACP sheet 3mm thick and fixed using SS 304 series hollow tubular section of 40mm bore all around. The board shall be pasted with the high intensity prismatic Retro Reflective tape on back gound in required colour writing as required (upto 60 letters on each side of board) of required shape and size as approved by GE. The sign board shall be supported on 02 Nos of post of 65 mm bore SS pipe 304 serises 4m long duly welded or fixed on SS nut bolts of required size as approved by GE. SS Pipe fixed in the ground with 02 Nos of 50x50x6mm size 60cm long MS angle iron welded to the bottom of SS pole for anchorage incl necessary excavation, returing filling and fixing with cement concrete (1:2:4) type B1 complete all as specified and as directed.

S&F in repairs for Solar delineator which has red blinker and charged by solar energy fitted on MS Pipe of 50 mm dia, dully powder coated, anti rust and anti theft steel net incl excavation of post holes in hard/dense soil, fill of mass concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in foundation of size (0.30x0.30x0.60m), removal of surplus soil and making good with existing surfaces complete all as specified and directed. Make :Sun Eye SE 202 or equivalent from list of makes

MOHANLAL MATHRANI CONS. PVT. LTD.

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED

UNIQUE ENGINEERS

vishalconstruction

Sunshine Ventures

Galaxy Construction