REPAIR AND MAINTENANCE OF OFFICE UNIT FURNITURE AT CVRDE AVADI UNDER AGE I R and D AVADI

Amount

TABLE OFFICE CLK STEEL

M&L cleaning /preparing the existing surfaces of table office clerks steel including inner surfaces of drawers steel including one coat of synthetic enamel paint as approved by Asst Garrison Engineer by spray process to achieve a uniform finish and to fix Hard rubber shoe for legs all as directed.

Removing the existing unserviceable drawers of table office clerk steel and S&F new drawer made of MS sheet CRC 1 mm thick bent to shape to its original position with and applying one coat of red oxide primer and all as specified and shown on drgs.

Removing the existing unserviceable top and S&F new top of pre laminated particle board commercial 18 mm thick exterior grade pasted with 1.5mm thick plastic laminated sheet fixed on top as directed and shown on drgs.

Removing existing old unserviceable locks from table office clerk steel/table office officer steel/table typist steel and supply and fix new locks steel made out of brass lever with duplicate keys of standard size and pattern suitable to the existing locks and including drawers plastic handle all as specified and as directed by Engr-in-charge.

Removing the old shoes and S&F PVC shoes to the legs of steel table above as directed by Engr in Charge

TABLE OFFICE OFFICER STEEL

M&L cleaning/preparing the existing surfaces of table office officer steel including inner surfaces of drawers and applying one coat of synthetic enamel paint as approved by Asst Garrison Engineer by spray process to achieve a uniform finish and to fix rubber toe for all legs all as directed.

Removing the existing unserviceable drawers of table office officer steel and S&F new drawer made of MS sheet CRC 1mm thick bent to shape to its original position and applying one coat of synthetic enamel paint over one coat of red oxide primer and all as specified and shown on drg.

Removing the existing unserviceable top and S&F new top of particle board commercial 18 mm thick exterior grade pasted with 1.5mm thick plastic laminated sheet fixed on top as directed and shown on drgs.

Removing existing old unserviceable locks from table office clerk steel/table office officer steel/table typist steel and supply and fix new locks steel made out of brass lever with duplicate keys of standard size and pattern suitable to the existing locks and including drawers plastic handle all as specified and as directed by Engr-in-charge.

Removing the old shoes and S&F PVC shoes to the legs of steel table as above as directed by Engr in Charge

TABLE COMPUTER

Removing the existing unserviceable top and S&F new top of particle board commercial 18mm thick exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top as directed and shown on drg.

Removing the existing unserviceable/damaged leg/ frame and replacing with new wooden/steel as per exisisting table computer leg/frame and all as specified and shown on drg.

Removing the old shoes and S&F PVC shoes to the legs of steel table all as specified and as directed

ALMIRAH STEEL

Removing the existing unserviceable Two way locking device and S&F three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah large steel all as specified and as directed

Removing the existing unserviceable clamps shelves and spot welding the shelves the almirah sides as directed by the Engr in charge and shown on drgs for almirah large/medium/small . Note :- Each shelf welding completely will be measured as a single unite

Preparation of old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Asst Garrison Engineer on all external and internal surfaces of almirah large steel .all as specified and as directed

Removing existing old unserviceable locks from Almirah Steel large/medium and supply and fixing of new locks steel made out of brass levers for 3 way locking device with suitable stainless steel keys in duplicate of standard all as specified and as directed

Removing existing broken handle from Almirah large/medium steel and supply and fixing new handle superior quality chromium plated of size 150mm matching with existing all as specified in drawing and as directed by Engr-in-charge

Removing the existing unserviceable Two way locking device and S&F three way locking device with cover for almirah medium steel all as specified and as directed

Removing the existing unserviceable/damaged shelves for almirah medium steel and S&F MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah and all as specified and shown on drg.

Removing the existing unserviceable/damage/broken legs for almirah Large/medium, S&F with a new legs made out of 18mm sheet with applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs.

Removing existing old unserviceable locks from Almirah Steel large/medium and supply and fixing of new locks steel made out of brass levers for 3 way locking device with suitable stainless steel keys in duplicate of standard size as per existing locks.Make : Godrej as directed by Engr-in-charge.

Removing existing broken handle from Almirah large/medium steel and supply and fixing new handle superior quality chromium plated of size 150mm matching with existing one all as specified in drawing and as directed by Engr-in-charge.

BOOK SHELVES ALMIRAH

Removing the existing unserviceable locking device and Lock S&F locking device and Lock with cover all as directed by the Engr in Charge and shown on drgs for almirah large steel

Removing the existing unserviceable clamps shelves and spot welding the shelves the almirah sides as directed by the Engr in charge and shown on drgs for almirah large/medium/small . Note :- Each shelf welding completely will be measured as a single unit.

Preparation of old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Asst Garrison Engineer on all external and internal surfaces of almirah large steel as specified and as directed (Size 920 x 485 x 1985mm) by Engr-in-Charge.

CHAIR TUBLER STEEL WITH ARMS/WITHOUT ARMS FD-75(M)

Painting to steel tubler frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubler steel with Arms all as directed and as specified.

Painting to steel tubler frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubler steel without arms all as directed and as specified

Removing the existing unserviceable/damaged seats from chair tubler steel with/without arms including 2mm canning and S&F new seats all as shown on drg and as specified

Removing the existing unserviceable/damaged back from chair tubler steel with/without arms including 2mm canning and S&F new back all as shown on drgs and as specified

Removing the existing unserviceable/broken Arm rest and S&F new Arm rest 1st class hardwood made to shape and painted with two coats of black paint synthetic enamel for chair tubler steel with arms all as specified and shown on drgs

Removing existing unserviceable rubber shoes from bottom of chair and S&F new hard rubber shoes to the bottom of chair all as specified and shown on drgs.

Removing existing unserviceable PVC/rubber plug from top of chairs and S&F new PVC/rubber plug to the top of chair all as specified and shown on drgs

Removing the existing un serviceable seat (cushioned) as directed by Engr-in-Charge from the following furniture and fix the new seat (12 mm th hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. with PVC lipping all around to them in all respect of Make : Godrej or equivalent approx size of seat 510 x 470 x 60 all as specified.

Chair computer all as specified and as directed

Chair cushion with Arms/Chair visitor/Chair Writing (Map) all as specified and as directed

Chair revolving padded with Arm high back all as specified and as directed

Recanning of chair Revolving as per the requirment with white plastic case 2 to 2.5mm wide gola type Shah/ primer brand weaving as per Godrej pattern complete all as specified and shown on drg including removing of U/s cane and cleaning the holes for recanning and painting of chair complete all as specified and directed

Removing the existing un serviceable back as directed by Engr-in-Charge from the following furniture and fix the new back (12 mm th hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping all around to them in all respect of Make : Godrej or equivalent all as specified.

Chair computer/Chair revolving all as specified and as directed

Chair cushion with Arms/Chair visitor/Chair Writing (Map) all as specified and as directed

Chair revolving padded with Arm high back all as specified and as directed

Removing the existing broken bottom gas lift (Up & Down) hydraulic with pouch (Maintenance free environmental friendly, chrome free cylinder tube shall be fixed in a MS black powder coated outer central column tube 38 mm dia and 2mm thick. It shall have 100 mm stroke length and gas pressure of 300n force, should under go an impact test)from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch of Make : Godrej or equivelent Note : Adjustable Tilting Mechanism to be designed with the following mechanism. Forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement)

Removing the existing broken twin caster wheel from revolving chairs, computer chairs, Tables TV Trolley etc., supply and fix new fibre caster wheel all as specified and as directed Make : Godrej or equivalent

Removing the existing broken Pedestal assy (injection moulded in black 30% Glass filled nylone A 10.5 MM dia forged bright Zinc plated MS castor pin is of press fitted into each prong for holding the cators. It is 600 mm pitch-centre Dia) from revolving chairs & computer chairs ,supply and fix new Fibre Stem Base of Make : Godrej or equivalent

Removing the existing broken padded Arm rest (Black integral skin polyurethane finforced with MS insert. It shall be scratch and weather reisistant) as per sample from revolving chairs & computer chairs ,supply and fix new arm rest make : Godrej or equivalent

Removal of old and unserviceable fabric alongwith foam, lining cloth etc of Sofa set 5 Seater (FD-18) re-setting the GI springs with new cotton rope of 4mm dia, supply and fix seat frame 580x590mm made of 8mm MS rod and providing new upholstery for seat, back and arm rest with hessain cloth of medium quality, coir fibre and foam cushion25 mm thick,40 density covered with tapestry cloth of approved quality and colour costing not less than Rs. 350 per metre, complete all as shown on drawings and as directed. Note: Set of 05 Nos i.e. 05 nos seat and 05 nos back will be measured as One set.

Recanning of Chair Dining Map as per the requirement with white PVC cane 2 to 4mm wide Gola type Shah/ Primer brand weaving as per Godrej pattern complete all as specified and shown on drg including removing of u/s cane and cleaning the holes for recanning and polishing with french polish complete all as specified and as directed.

BALAJISTEELINDUSTRIES

LEO ENTERPRISES

SIVA ENTERPRISES