Tender ID

Karnataka

Retender

Works

Roads

Providing Decorative Street light Fittings and Shifting of Existing 11 KV/LT Line to Chinakuruli to Bhookana Kere Road Pandavapura taluk.

Public Works Department

PWD Division Office Mandya | Karnataka

Amount: ₹82.4 LCloses: 19 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published28 Oct 2024
Closed19 Nov 2024
Retendered28 Oct 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 28 Oct 2024

Tender Value

₹82.4 L

EMD Value

₹1.6 L

Closing Date

19 Nov 2024, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Shubha.T.S

Office Number

Work Description

Providing Decorative Street light Fittings and Shifting of Existing 11 KV/LT Line to Chinakuruli to Bhookana Kere Road Pandavapura taluk.

Tender Information

Tender ID

PWD/2024-25/RD/WORK_INDENT16079

Reference Number

PWD/2024-25/RD/WORK_INDENT16079

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mandya

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredClass-I Electrical Inspectorate Registration Certificates

RequiredBalance Sheet & Profit and Loss Statement certified by a Registered Chartered Accountant / Auditors

RequiredWork done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent

RequiredBankers Certificate issued by Nationalized Bank in prescribed format.

RequiredTender capacity statement

RequiredOngoing and existing commitments details

RequiredThe Tenderer must have submitted the Certification of registration in the Labour department with the latest renewal

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The cable trench, horizontal duct drilling and laying shall be executed as per ISS No.1255-1967 duly taking all necessary precautions permissions to be got approved by the concerned authorities for digging works. However, necessary letters to be addressed to facilitate for approval with the concerned department.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor

Whenever executing authority insists proof of having purchased the materials (used during executing the work) for verification, the contractor shall produce the purchase bills

The contractor shall guarantee all the materials supplied by him including erection, electrification work for trouble free top class performance and against manufacturing defects for a period of one year from the date of satisfactory completion, commissioning and handing over to user department. The contractor shall make his own arrangement for rectifying defects/replacement of defective materials immediately on receipt of intimation from executing authority and power supply shall be restored. Failure of which, action will be taken to get the work rectification through other agency at the risk and cost of the contractor

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor

The contractor shall not deviate/alter/execute excess quantities or additional items without prior approval before placing the order. Joint site inspection will be made by Executive Engineer / Assistant Executive Engineer PWD.

It is the responsibility of the contractor to pursue and obtain all necessary approvals related to work from respective departments

During the execution of any Minor Civil works or any other minor works which are to be executed, has to be done by the bidder from his end without any charges

The contractor should see that the existing installation and working of the same are not affected during execution. Only after satisfactory completion, and charging of new lines, the existing installation, if any shall be dismantled by duly informing to the Department. A site order book of the work shall be maintained and the contractor shall acknowledge the order given by the officers and shall carryout accordingly.

The tenderer shall pass on to the department all the warranties, benefits etc., from the original equipment manufacturers

The Contractor shall be solely responsible, not withstanding any stipulation by Owner or Engineer, for initiating, maintaining and supervising all safety precautions and programs in connection with the work and shall comply with all laws, ordinances, codes, rules, regulations and lawful orders of any public authority having jurisdiction for the safety of persons or property or to protect them from damages, injury or loss during the entire contract period, including non-working hours. Contractor shall maintain first aid facilities at site. All critical injuries shall be reported promptly to Engineer with a copy of Contractors report covering each personal injury, requiring the attention of a physician.

The Contractor shall submit to the employer, for his review and approval, all shop drawings, samples, materials lists, equipment data, instruction manuals, record documents, manufacturers equipment manuals, and other information required by the Contract Documents, before use and execution and before bringing the material at Site.

The Contractor shall supervise and carry out the Works as per the approved shop drawings or part there of efficiently and with his best skill and attention. He shall be solely responsible for means, methods, techniques, procedures and sequences of construction. The Contractor shall coordinate all parts of the Works and shall be responsible to see that the finished work complies fully with the Contract Documents, and such other instructions and variation orders as the Engineer may issue during the progress of the Works. The Contractor, at no point of time, shall blame the Owner and or the Project Management Consultant, for the wrong doings of the Contractor, in any part of Works.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority not below the rank of Executive Engineer Or District level Officer and scan the original Certificate and attach the scanned file Certificate/ Certificates shall be produced at the time of opening of technical Bids for physical verification

The tenderer shall scan the original ownership document/ lease / hire commitment Agreement scanned file to the Bid. The Original Documents shall be produced at the time of opening of Technical Bid.

The Employer reserves the right to reject any or all Tenders without assigning any reason

Tenderer shall note that the tenders those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation

All materials required for this work, shall be procured by the Tenderer himself and should be got tested by the quality control authorities, at his own cost before use on the work

All the items includes with all Leads and Lifts, Loading and Unloading, Cost of materials, Labour, Hiring of machineries as per Standard specifications and as directed by the Engineer-in-charge of the work and other incidental items which are necessary for the successful completion of the work

The entire work shall be carried out under the direct supervision of Officers in charge, Executive Engineer and Assistant Executive Engineer. In all cases of differences, disputes, etc., regarding the interpretation of specification of condition in general with any of the work, the decision of E.E PWD Division, Mandya shall be final and binding on the contractor

SHOP DRAWINGS: Contractor must submit well in advance shop drawings for approvals by the Engineer-in-Charge and approvals must be obtained before proceeding for execution of the works. DIGITAL FORMAT: All the Documents and drawings shall be as a Hard copy as well as on a Digital format in requisite numbers as per the direction of the Engineer-in-Charge

The project shall be completed well within the contract period, the Tenderer should maintain the works of his scope during the defect liability period, which is 1Year after the successful completion of the work

Co- Ordinating / solving the right of way problems is responsibility of Licensed Electrical Contractor (LEC), in co-ordination with PWD/ local authorities CHESCOM

Tree Cut/ trimming of trees, in Co- Ordination with forest Dept. etc., is the responsibility of bidder / LEC in the way of shifting lines etc.

All the electrical materials which are bind to be used, before dispatching from the manufacture end shall be inspected by Executive Engineer, PWD

Clause 25.5 stipulates for Tenderer to produce detailed rate analysis for various items if tender is seriously unbalanced. (i.e., where quoted rates are very high as well as where the quoted rates are less than estimated rated)

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection

It is the responsibility of the Tenderer who executes the works to get services of the installations from the concerned Service Electricity Companies duly obtaining approval from the govt. electrical inspectorate as the case may be. However the department will pay the deposit/statutory fees if any after hearing the respective statutory bodies

The contractor should arrange for the visit of The Executive Engineer and Assistant Executive Engineer, PWD Division to the manufacturing premises for inspection and conducting tests as per ISI specifications on LT UG cable before dispatch of the materials at his cost, only after approval from the Executive Engineer / Assistant Executive Engineer PWD, the materials shall be dispatched or otherwise the cable will not be accepted at site. The manufacturer shall have all testing and laboratory facilities in their premises and contractor shall be present at the premises to make arrangements for conducting tests

After delivery at site, the materials will be inspected, if the materials do not conform to relevant ISS/ISI and technical specifications, then such materials will be rejected. The contractor shall remove the rejected materials at his own cost

It is the responsibility of contractor to co-ordinate with executing authority for commissioning the Street lights satisfactory by observing all formalities up to handing over to the user department. After this only, final bill shall be prepared

The contractor must obtain the approvals form the Electrical Inspectorate Government of Karnataka if necessary

It is the responsibility of the tenderer to prepare the as build sketch of detail Road lighting and hand over the same to the end user as per the instructions of the Employer in charge, not below the rank of an Executive Engineer or equivalent.

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-3 K.P.W.D. and further orders there on

The Contractor must obtain the necessary approvals as per fire norms from the concerned fire authority

It is the responsibility of the contractor in obtaining permission from the concerned railway authority for laying Cables across Railway crossings

The Tenderer must submit ongoing and existing commitments details separately

The tenderer should furnish Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers detail

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and G.No. PW/134/BMS/2007 Dt. 27.7.2007, a sum amounting to 1% of the bill amount will be deducted welfare fund

Conditional Tenders will not be accepted

GST at 18Percent shall be paid to the tendered amount separately.

GST shall not be paid in the extended period of contract for which the contractor alone is responsible for the delay as determined by the authority while granting the extension of time

The tenderer as a Prime Contractor having valid Class-I Electrical License issued by Electrical Inspectorate Govt. of Karnataka and should have suitable technical, financial & managerial capabilities.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Past Experience

3.2To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. from 2019-20 to 2023-24 c) Executed in any one year, (for a continuous period of 12 Months) during last five years the following minimum quantities of work. 1) Decorative LED street light with Poles-59 Nos 2) High Mast pole-2 Nos, 3) LED flood light-13 Nos, 4) UG Cable-0.26Km, 5) RCC Pole-16 Nos, 6) Rabbit Conductor-0.80Km.

Work Done Certificate

3.2To qualify for award of this contract, each Tenderer in its name should have in the last five year period i.e. from 2019-20 to 2023-24. b) Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one single similar work, Such as Providing Decorative Street Light Works of Value not less than: Rs.41.20 Lakhs in a single electrical work. The work done certificate should be in the prescribe format K/W-3 Section 3: Qualification information clause 1.3

Work Done Certificate

Capabilities of Vendor

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under/ Assessed available tender capacity -(AxNx2.5-B) Where, A-Maximum value of construction works executed in any one year during the last five years (updated 2024-25 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. 0.75 Years (09Months) B - Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next. 0.75 Years (09 Months) (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Tender capacity statement

Financial Status

The tenders must be accompanied credit line/ letter of credit/ certificate from bank for meeting the requirement of not less than Rs.24.72 Lakhs.

Line of Credit

3.2 (a) Achieved in at least two financial years a minimum financial turnover (in all classes of Electrical Engineering construction works only of Rs.82.40 Lakhs. (usually not less than the estimated annual payments under this contract).

Audited CA Certificate of Annual Turnover

Others

The Tenderer must have submitted the Certification of registration in the Labour department with the latest renewal

Others -- The Tenderer must have submitted the Certification of registration in the Labour department with the latest renewal

The Tenderer must submit ongoing and existing commitments details separately

Others -- ongoing and existing commitments Works List

The tenderer as a Prime Contractor having valid Class-I Electrical License issued by Electrical Inspectorate Govt. of Karnataka and should have suitable technical, financial & managerial capabilities

Others -- Electrical License

Fee & Financial Details

Tender Fee Amount

₹2,070

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

28 Oct 2024

Published

28 Oct 2024

Bid Opening

20 Nov 2024

Download Ends

19 Nov 2024

BOQ Preview

•

Providing Decorative Street light Fittings and Shifting of Existing 11 KV/LT Line to Chinakuruli to Bhookana Kere Road Pandavapura taluk.

•

Fabrication, supplying and erection, testing and commissioning of …...Mtrs Polygon high mast with single / Multiple telescopic sections having (minimum overlap distanace of 1.5 times of top se...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (ESCOM...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm(V-6 ESCOM P.No 52/21.05)

•

Earth work excavation by manual means for drains,canals, waste weir draft,approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, inclu...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Brass Cable Gland 32 mm (Vol-6 ESCOM P.No 28/508/63.02)

•

Aluminium End Terminal Lug (Vol-6 ESCOM P.No 27/471/60.03) 25 Sqmm

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. (Vol 6 P.No 60/25 x 6 mm GI strip)

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacit...

•

Supplying of LED Floodlight with .......W System Power consumption pressure die cast aluminium housing with powder coating with IP 65 protection. 1, 200-275V voltage with electronic Driver, PF 0.9, s...

•

Fixing halogen/metal hallide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (Vol 6 P.No 56/13.5)

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.(V...

•

Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.60Amps (...

•

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers (Vol 6 P.No21/5.48)

•

Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified I...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Earth work in surface excavation for stripping, seating of bund, Road way bymeans for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock upto 30...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

•

1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995. 3x95 + 1x70 + 1x25 Sqmm Street light (Insulated Messenger cum Neutral)(18/293/42.04)

•

Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral) + (1x16) (Street Light Control) (53/208/24.03)

•

Suspension Clamp suitable for insulated Messsenger wire of size 25 to 95 Sqmm(18/299/43.01)

•

Fabricating, supplying and erection swaged tubular pole of DOUBLE ARM DECORATIVE STREET LIGHT POLE FOR CENTRE MEDIAN:Supply of 7.00 M high, Cast Iron and MS tubular combination based decorative and or...

•

SINGLE ARM DECORATIVE STREET LIGHT POLE FOR

•

PEDESTRIAN: Supply of 7.00 M high, Cast Iron and MS tubular combination based decorative and ornamental lamp post with decorative single arm bracket as per ...

•

Supply and fixing of IP65 Rated Decorative Street Light for gardens, pathways, Heritage sites and other city Beautification Applications. 75 Watts LED Albany fitting with pressure die cast aluminium h...

•

Part B Shifting of Existing 11 KV/LT Line

•

RCC Pole - 9 Mtr Long, 145 Kg WL (V-6 ESCOM P.No 3/ 1/1.01)

•

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth(V-6 ESCOM P.No 44/ 30/2.02)

•

PSCC Pole - 8 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/49 Dtd 24.11.2018) as per REC Standards (V-6 ESCOM P.No 3/5/1.05)

•

Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth(V-6 ESCOM P.No 44/ 29/2.01)

•

LT 4 Pin Cross Arm GI (V-6 ESCOM P.No 4 I.No 16/2.06)

•

Labour for 4 Pin Cross Arm (V-6 ESCOM P.No 45 I.No 50/5.02)

•

11 kV, Horizontal Cross Arm (V-6 ESCOM P.No 3/12.2.02)

•

Labour for Horizontal Cross Arm (V-6 ESCOM P.No 45/52/5.04)

•

11 kV, Special 3 Pin Cross Arm - GI (V-6 ESCOM P.No 3/14/2.04)

•

11 kV, 45 kN Polymeric Insulator (V-6 ESCOM P.No 5/ 56/6.10)

•

11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) (V-6 ESCOM P.No 5/52.6.06)

•

1.1 kV Polymeric Pin Insulator (V-6 ESCOM P.No 5/51/6.05)

•

No. 8 Strain Insulator (V-6 ESCOM P.No 5/53/6.07)

•

GOS Set 200 Amps Single break (V-6 ESCOM P.No 11/166/24.01)

•

Labour for GOS Set(V-6 ESCOM P.No 48/97/13.02)

•

Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 (V-6 ESCOM P.No 9/144/21.05) For 100/300 kVA 4/5 Star Rated Transformer on PSCC Pole - 9 Mtr Long, 300 Kg WL ...

•

Labour For DP TC Set (V-6 ESCOM P.No 44/39/3.02)

•

Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02)

•

Labour ACSR (V-6 ESCOM P.No 46, I.No 67/7.02)

•

Weasel ACSR (6/2.59 mm Al+1/2.59 mm St), Std Wt: 128Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02)

•

Labour ACSR (V-6 ESCOM P.No 46, I.No 67/7.02)

•

Spiral Earth Electrode (V-6 ESCOM P.No 26/2.16)

•

Labour For Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) (V-6 ESCOM P.No44/36/2.08)

•

8 SWG GI Wire (4.064 mm Dia), Std Wt: 125 Kg/KM (V-6 ESCOM 5/61/8.02)

•

7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM (V-6 ESCOM 5/60/8.01)

•

Guy Set Complete with No. 15 Strain Insulator ((CDS-1)

•

Labour for Guy Set (CDS-1)

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Rabbit (Escom Pg 46, I.No 67/7.02)(5233*1.9)

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Weasel (Escom Pg 46, I.No 66/7.01)(3975*1.9)

•

Releasing and refixing of DP Set (2 Pole Strucrure Kit) as per IS-1977 For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - GI (V-6 ESCOM P.No 12/179/26.02)

•

Releasing and Refixing of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth (V-6 ESCOM P.No 44/ 30/2.02)(1113*1.9)

•

Releasing and Re- erection of V-Shape/Horizontal cross arm for DC Line including Brace and Insulator fixing. (Without Single Top Support (V-6 ESCOM P.No 45/52/5.04) (160*1.9)

•

Releasing and Re- erection of 4 Pin cross arm with Insulator and Braces fixing (V-6 ESCOM P.No 45/50/5.02) (160*1.9)

•

Releasing & Refixing of Over Head Service Mains (Single Phase/3 Phase) Per connection/Installation (While executing reconductoring works only)

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 6 mm GI strip( Elec SR Vol-6 P.No.59/12.58.2)

•

Providing Decorative Street light Fittings and Shifting of Existing 11 KV/LT Line to Chinakuruli to Bhookana Kere Road Pandavapura taluk.

•

RCC Pole - 9 Mtr Long, 145 Kg WL (V-6 ESCOM P.No 3/ 1/1.01)

•

Fabrication, supplying and erection, testing and commissioning of …...Mtrs Polygon high mast with single / Multiple telescopic sections having (minimum overlap distanace of 1.5 times of top se...

•

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth(V-6 ESCOM P.No 44/ 30/2.02)

•

PSCC Pole - 8 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/49 Dtd 24.11.2018) as per REC Standards (V-6 ESCOM P.No 3/5/1.05)

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm(V-6 ESCOM P.No 52/21.05)

•

Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth(V-6 ESCOM P.No 44/ 29/2.01)

•

LT 4 Pin Cross Arm GI (V-6 ESCOM P.No 4 I.No 16/2.06)

•

Labour for 4 Pin Cross Arm (V-6 ESCOM P.No 45 I.No 50/5.02)

•

Brass Cable Gland 32 mm (Vol-6 ESCOM P.No 28/508/63.02)

•

11 kV, Horizontal Cross Arm (V-6 ESCOM P.No 3/12.2.02)

•

Aluminium End Terminal Lug (Vol-6 ESCOM P.No 27/471/60.03) 25 Sqmm

•

Labour for Horizontal Cross Arm (V-6 ESCOM P.No 45/52/5.04)

•

11 kV, Special 3 Pin Cross Arm - GI (V-6 ESCOM P.No 3/14/2.04)

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. (Vol 6 P.No 60/25 x 6 mm GI strip)

•

11 kV, 45 kN Polymeric Insulator (V-6 ESCOM P.No 5/ 56/6.10)

•

11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) (V-6 ESCOM P.No 5/52.6.06)

•

1.1 kV Polymeric Pin Insulator (V-6 ESCOM P.No 5/51/6.05)

•

Fixing halogen/metal hallide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (Vol 6 P.No 56/13.5)

•

No. 8 Strain Insulator (V-6 ESCOM P.No 5/53/6.07)

•

GOS Set 200 Amps Single break (V-6 ESCOM P.No 11/166/24.01)

•

Labour for GOS Set(V-6 ESCOM P.No 48/97/13.02)

•

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers (Vol 6 P.No21/5.48)

•

Labour For DP TC Set (V-6 ESCOM P.No 44/39/3.02)

•

Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02)

•

Labour ACSR (V-6 ESCOM P.No 46, I.No 67/7.02)

•

Weasel ACSR (6/2.59 mm Al+1/2.59 mm St), Std Wt: 128Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02)

•

Labour ACSR (V-6 ESCOM P.No 46, I.No 67/7.02)

•

Spiral Earth Electrode (V-6 ESCOM P.No 26/2.16)

•

Labour For Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) (V-6 ESCOM P.No44/36/2.08)

•

1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995. 3x95 + 1x70 + 1x25 Sqmm Street light (Insulated Messenger cum Neutral)(18/293/42.04)

•

8 SWG GI Wire (4.064 mm Dia), Std Wt: 125 Kg/KM (V-6 ESCOM 5/61/8.02)

•

7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM (V-6 ESCOM 5/60/8.01)

•

Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral) + (1x16) (Street Light Control) (53/208/24.03)

•

Suspension Clamp suitable for insulated Messsenger wire of size 25 to 95 Sqmm(18/299/43.01)

•

Guy Set Complete with No. 15 Strain Insulator ((CDS-1)

•

Labour for Guy Set (CDS-1)

•

SINGLE ARM DECORATIVE STREET LIGHT POLE FOR

•

PEDESTRIAN: Supply of 7.00 M high, Cast Iron and MS tubular combination based decorative and ornamental lamp post with decorative single arm bracket as per ...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Rabbit (Escom Pg 46, I.No 67/7.02)(5233*1.9)

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Weasel (Escom Pg 46, I.No 66/7.01)(3975*1.9)

•

Releasing and refixing of DP Set (2 Pole Strucrure Kit) as per IS-1977 For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - GI (V-6 ESCOM P.No 12/179/26.02)

•

Releasing and Refixing of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth (V-6 ESCOM P.No 44/ 30/2.02)(1113*1.9)

•

Releasing and Re- erection of V-Shape/Horizontal cross arm for DC Line including Brace and Insulator fixing. (Without Single Top Support (V-6 ESCOM P.No 45/52/5.04) (160*1.9)

•

Releasing and Re- erection of 4 Pin cross arm with Insulator and Braces fixing (V-6 ESCOM P.No 45/50/5.02) (160*1.9)

•

Releasing & Refixing of Over Head Service Mains (Single Phase/3 Phase) Per connection/Installation (While executing reconductoring works only)

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 6 mm GI strip( Elec SR Vol-6 P.No.59/12.58.2)

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-3-16079.docx

Tender Document • 1.06 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Roads

Providing Decorative Street light Fittings and Shifting of Existing 11 KV/LT Line to Chinakuruli to Bhookana Kere Road Pandavapura taluk.

Public Works Department

PWD Division Office Mandya | Karnataka

Amount: ₹82.4 LCloses: 19 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published28 Oct 2024
Closed19 Nov 2024
Retendered28 Oct 2024