Special Repair to balance portion (i.e Northern Flank ) of Bldg No P-26 (APS Gaya)

Amount

Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises all as specified.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) all as specified and directed

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded aggregate) including necessary form work complete.

S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.

M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified.

M&L for 75mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete.

M&L for glazed ceramics coloured tiles of size 450x350x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces.

M&L for 10 mm thick plaster in cement mortar 1 : 4 for fixing of wall tiles complete all as specified.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles as directed.

M & L for vitrified ceramic tiles light shed 10 mm thick ( square or rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed with cement and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 complete.

M & L for vitrified ceramic tiles light shed 10 mm thick ( square or rectangular) polished, area of each tiles exc 0.36 sqm but not exc 0.42 Sqm each in skirting etc. set and jointed with cement and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 complete.

M & L for Machine cut kota stone slab flooring 20-25mm thick incl 15 mm thick cement screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete

M & L for Machine cut kota stone slab 20-25mm thick incl 10 mm thick rendering in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete as in riser of steps, skirting, dado and pillar laid over cement screed and jointed

Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).

Taking down chowkhats for frames exc 1.5 Sqm but n exc 4.00 Sqm (without taking shutters from the frame).

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Solid core PVC factory made Door shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing

S&F Powder coated aluminium frame/shutters for doors, windows , ventilators sliding/openable etc. including joining cleat for fixing , locking arrangment, rubber beading , screws etc complete all as specified . Make: JINDAL /HINDALCO / INDALCO. Note:(1) Glazing and wire mesh shall be measured and paid separately . (2) item shall be paid as per weight of aluminium section . (3) The rate quoted shall be inclusive of the cost of neoprene beading , glazing pin , screws and powder coated fitttings such as locking arrangement etc as required , which shall not be measured for arriving the weight . (4) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S & F mild steel butt hinges, medium weight cold rolled of size 100 mm .

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section

S & F SS Butt hinges 75 mm medium weight complete all as specified and directed.

S&F Aluminium alloy, anodised handles extruded fabricated type anodised 150mm long

S&F 150mm long aluminium anodised handle cast type and fixed D type

S&F in repair aluminium body ISI marked door closer hydraulically regulated , designation no. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed Make:Hardwyn/Marshal

S&F 100mm long mortice latch with two levers (vertical type), mild steel body complete all as specified and directed

S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engr- in- charge.

S&F sheet glass 5mm thick pin headed/froasted and glazing with clips in squaire. Exc 0.50 sq m in each

Dismantling of wall/ceiling boards (fibre,pulp,insulation etc.) of any type including cover fillets

M&L providing and fixing of Gypsum Board 12mm thick in ceiling fixed with screws as per manufacturer instruction and as per Engr-in -charge .

S&F 12mm thick PVC Decorative boards ( Make: CenturyBrand Starke Prime) as in wall panelling and fixed on GI channel (size 69x 23mmx2mm thick) fixed on wall with 600x 600 mm spacing complete all as specified and directed by Engr-in -charge.

Viterous china urinal half stall type complete including providing and fixing plugs bedding urinals against wall in cement mortar1:2 securing plug with urinal to plug with and including 60mm long brass screw pointing around urinal etc complete fixing with automatic flushing cistern with brackets flush pipe etc including taking down existing broken Urinal pot.

S & F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon

S&F Ball valves 25mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete.

S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 25mm dia all as spd and directed (Make-Zoloto/NMC/Leader).

M&L 25mm thick Cement concrete Type C2, 1:2:4, (20 mm graded aggregate) as in sub base floor finished evevn & fair all as spcified.

M&L 75mm thick Cement concrete Type C2, 1:3:6 , (40 mm graded aggregate) as in sub base floor finished evevn & fair all as spcified.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete.Note : Liquid WPC will be measured and paid separately.Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked.

M&L rendering 10mm thick in CM 1:3 on concrete surfacves/ chajja/ ceiling, etc finished even and smooth without using extra cement

Taking up or down steel tubing and connections, including cleaning for re-fixing of 15 mm dia.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia.

Supplyband laying of 20mm CPVC pipes SDR11& plain CPVC SDR 11 fittings on walls / ceilings or laying in floors including unions ,brass elbow, brass tee, MBTA, FBTA complete all as specified.

Supply and laying of 25mm CPVC pipes SDR11& plain CPVC SDR 11 fittings on walls / ceilings or laying in floors including unions ,brass elbow, brass tee, MBTA, FBTA complete all as specified.

S & F Male Brass Threaded Adaptor (MTA/ MBTA/Female Brass Threaded adaptor (FTA/ FBTA) 20 mm dia complete all as specified.

S&F in repair 100-125 mm dia mild steel chromium plated grating (double Q) fixed on floor trap/ nahani trap in cement mortar 1:6 all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 3mm thick wall care putty including preparation complete.

M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete on newly plastered surface.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M&L for applying two coats of oil bound distemper on old decorated wall including, rubbing with sand paper complete all as specified and directed.

M&L for applying two coat of acrylic distemper as in ceiling incl removal of existing treatment of old treated ceiling surfaces

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

S&F Structural steel works as in roof trusses, purlins, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , MS plate, riveting incl bending and welding, conforming to Fe – 290 Gde E -- 165 complete all spd and as directed.

M&L 0.50 mm thick,Pre painted Galvalume aluminium zinc coating , GI based semi corrugated mild steel sheeting with corrugation side lap, fixed with `counch screws in lieu of J hooks, in roof coverings walls etc complete all as specified and directed by engr in charge.

M&L for plain aluminium sheeting , alloy 31000H4 in ridges, hips, valley , gutter ,drip and straight flashing ( length and girth as fixed).

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete.

S&F in repair vitreous china WHB size 550x400 mm white flat back ,pedestal type including pvc waste pipe but excluding taps, waste coupling , chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S&F in repair CP two way angle valve/bib tap with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F white vitreous china wash down water closet pan pedestal pattern (white) including trap connection to drain or outgoing pipe, anti- syphonage pipe, etc complete all as specified and as directed. (Cascade type)

S&F mild steel chromium plated health foucet for 15mm dia pipe with 1.25m long flexible tube and ABC wall hook inclu making connection and fixed in position for EWC including nut/washer complete.

S&F plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC.

S&F of sheet glass shelf assembely consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete.

S&F in repair chromium plated toilet paper holder with flat recessed type stainless steel complete.

S&F CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete.

S & F in repair sinks made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; Waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete.

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) vent cowl 110mm bore

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

S&F Venetion Blind for windows white colour Cord Mechanism to tilt and raise aluminium slats light filtering shades for office etc complete

S&F In- built type steel utility box locker size 600mmx600mm with key and hasp staple for office, painting and necessary fittings etc complete (steel thickness 1.25mm)

M&L Chequred cementb concrete tiles 20cmx20cmx25mm thick incl 20mm thick screed bed or bedding layer with CM 1:4 complete.all as per direction of Engr -in -charge.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc making good distrubed surfaces of walls, floors etc complete all as specified and directed.

Taking down old/ unserviceable distribution board by disconnection of electric connection SPN DBs/TPN DBs including old unserviceable MCCBs/ MCBs etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down ceiling fan / exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.

M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light/fan point controlled by one, one way switch 5 Amps

(b) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

Description all as per item No 5 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F modular switch piano flush type, single pole, one way and 5/6 Amp single module complete.

S & F modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete.

S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete.

S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete.

M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4.0 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit

S & F sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

S & F MCB single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

S & F MCB single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

S & F single pole and neutral enclosure with two pin and earth plug socket complete with one MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed.

S & F energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.0 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note: Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

M/S NARAYAN & SHARMA (BID ID -3117946)

M/S VIKAS CONSTRUCTION CO. (BID ID -3118293)

BEHL ENGINEERS AND TRADERS (BID ID -3118345)

MS HARI MOHAN GUPTA (BID ID -3119522)

SINGHAL ENTERPRISES (BID ID -3119208)

BISHWNATH KUMAR BHARTI (BID ID -3119245)

M/S ABHAY KUMAR AND BROTHERS (BID ID -3119478)

M/s Vinay Kumar (BID ID -3119194)

M/S PANCHAM RAI SONS (BID ID -3119192)

M/s Subham Traders (BID ID -3119284)