Work for proposed multilevel parking at Mata Mansa Devi Temple, Panchkula.

Amount

Earth Filling Under Floors Brought From Out Side any lead with laying in 15 cm layers including dressing, ramming, watering and consolidation/compaction complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 including cutting, jointing, wastage, but excluding cost of lead jointing. Make : Finolex, Astral, Supreme, Diplast

Double socket B Type 110mm o/d SWR UPVC pipe lines laid complete

Double socket B Type 75 mm i/d SWR UPVC pipe lines laid complete

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. Make : Finolex, Astral, Supreme, Diplast

For 110mm o/d pipes

110 mm o/d UPVC Heal Rest Bend

110mm o/d Single junction with door 110mm x 110mm x 100mm

110mm o/d Bend with door

110mm o/d Bend plain

110mm o/d Cowls

110mm o/d Collars

For 75 mm i/d pipe

75 mm i/d Centrifugally cast iron Heal Rest Bend

75 mm i/d Single junction with door

75 mm i/d Bend with door

75 mm i/d Bend plain

75 mm i/d Cowls

75 mm i/d Collars

Providing, Stringing out U.P.V.C. Pipes casting as per IS:15328-2003 class-SN-8 along the trenches and laying the same in Trenches to correct alignment and gradients, cutting and jointing including cost of specials complete as per specifications. Make : Finolex, Astral, Supreme, Diplast

110mm o/d pipe

160mm o/d pipe

ELECTRICAL WORKS : Wiring in 1.5 sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & outer face plates complete (flushed). (Based on HSR - 31.1). Modular accessories should be either of make Legrand / Crabtree Havell's / Housmann only.

(ii) Light Point single control :-

(a) short point

(b) Medium point

(c) Long point

(ii) Light Point without control :-

(b) Medium point

(c) Long point

(iv) Light Plug

(a) short point

(v) Power Plug

(c) Long point

Supply, Carriage, erection, testing and commissioning of LED fitting with integral / non-integral driver. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from Government / NABL / UL accredited laboratory for LM79 & LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor >0.9, THD <10%. The sample of fitting can be got tested in the presence of representative of the department from NABL I UL accredited laboratory. The job includes cost of all material and erection of fitting with all accessories including anchor fasteners and connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge.

High efficiency aluminium profile linear batten with polycarbonate diffuser for enhanced productivity. Ingress protection IP40 (Wipro Make Cat.No.LL24-541-XXX-57-CD / Philips make Cat.No. BN100C LED40S-6500 PSU L120 GR / Bajaj make Cat.No. BLTRU 40W NW VIVA or as approved in the department).

LED Bulk Head Fitting Wipro make LW07-141-XXX-57-XX / Philips make WT202W LED6S NW PSU S2 PC / Bajaj BIB WB 10W LED or as approved in the department).

S/I/T/C of LED street light light fitting of 35W rating with integral / non-integral driver and minimum 110 lumens per watt complete in all respect. The fitting is to be fixed on wall with bracket mounted on wall. The job includes cost of bracket made of GI pipe 32mm dia B-class 0.3m overhang L-shaped angle of inclination 120 degree with upper side of bracket 30cm long and lower side of 40cm long. The bracket is to be fixed on wall with 2Nos. anchor fastners grouted in wall. The job includes cost of LED fitting, GI pipe bracket and anchor fasterners etc. required to complete the same. The work should be completed as per satisfaction of Engineer-in-charge. Wipro Cat No.LR13-501-XXX-57-XX (35W) / Philips make Cat No.BRP046 LED 36 CW MR S1 PSU GR (36W) / Bajaj make Cat.No.BRTFG 36W LED (36W) or as approved in the department)

Supply, carriage and erection of 100W LED Flood light Luminaire (White) with efficacy of minimum 110 lm/W with LED life of 50000 br hrs with THD<10% and PF>0.9 with die cast aluminium bod.Fixture suitable for Outdoor application with IP66 protection.The fixture has colour temperature of 5700K with precise beam angle of 60degree. The job is includes cost of all material and erection of fitting with anchor fasteners including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge / Architect. Wipro Cat No. LF20-122-060-57-xx Model Alpha floodlight / Philips make BVP192 LED110 CW HO NB FG GR PSU / Bajaj make BJFL 100W LED I or of approved make of department.

Supply, Carriage, Erection, Testing & Commissioning of wall fan 16" sweep (400mm) Oscillating type complete with built-in regulator. The fan is to fixed on wall with suitable fixing arrangement including connection from nearest 3pin 6A socket with cost of Cu wire and 5A plug top required as per satisfaction of Engineer-in-charge. The job includes cost of all petty material required at site. Orient make FUNTOOSH KIDS FAN White / Crompton make WM16" Hiflo Riviera Sperfeel OPW / Havell's Make D'zire or as approved in the department

S/E of A.C. Exhaust fan (ISI Marked) suitable for single phase A.C. 230 Volts, 50 HZ capacitor, 900 RPM (Heavy Duty) complete with mounting ring frame with four fixing holes and automatic louver shutter but without regulator. The exhaust fan and its louver is to be fixed in the existing glazing with suitable MS frame of required thickness as per site including its painting etc. as per site requirement.

Size 380mm sweep (Havell's make Turbo Force 900rpm single phase or its equivalent of Crompton / Orient / Usha make)

S/I/T/C sheet steel inclosure for 125A 4 pole MCCB complete with all accessrories as required.

Supply and rection of vertical double door sheet enclosure distribution board (IP 43) suitable for MCCB as incomer recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work.

8 way, TPN (Vertical, MCCB provision as incomer and provision for 24 Nos. 6A-30A MCB SP as outgoings) Havell's make (Cat No. DHDLVDRWGOFO08) / Schneider make (Cat.No. A9HVTD08) / Legrand Make (Cat.No.5077 47) or as approved in the deparment)

Bidder Name

Amount

LALIT KUMAR CONTRACTOR

pyramid builders

A T CONSTRUCTION

ARUNESH GUPTA

ARUNESH GUPTA

LALIT KUMAR CONTRACTOR

pyramid builders

ARUNESH GUPTA

LALIT KUMAR CONTRACTOR

pyramid builders