SPECIAL REPAIRS TO BLDG NO P-110 AT MECH CAMP AREA IN THE AREA OF AGE BR III AND SPECIAL REPAIR TO BLDG NO P-8C AT PARADE ROAD IN THE AREA OF AGE BER II UNDER GE (EAST) DELHI CANTT-10.

Amount

Demolition in cement concrete of cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level, complete all as specified and as directed.(8+31)

Demolition in cement concrete of any description and in any position (reinforced), complete all as specified and as directed. (1+0)

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed. (5+8)

Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc., to receive new plaster, complete all as specified and as directed. (150+480)

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and as directed. (1+62)

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5Sqm each, complete all as specified and as directed. (24+15)

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5Sqm but not exc 4Sqm each, complete all as specified and as directed.(28+0)

Taking down rolling shutters of any size gear operated type with gear box and crank handle/gear operated type with chain wheel and hand chain incl taking down complete accessories like shaft, top cover, guide channel,gear box etc., complete all as specified and as directed.(0+280)

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) & removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.(185+205)

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thickness including frame work of any type and cover fillets, complete all as specified and as directed.(112+520)

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.(2+0)

Dismantling AC steel (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and as directed.(0+730)

Dismantling timber scantling any class of wood over 40Sqcm and over in section, unframed work, complete all as specified and as directed.(0+18)

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 15mm, complete all as specified and as directed.(80+0)

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 20mm, complete all as specified and as directed.(35+0)

Demolition and breaking up SGSW, AC or reinforced concerete pipes 150 mm dia jointed in cement mortar, complete all as specified and as directed.(30+0)

Dismantling existing PVC water tanks of capacity exc 500 & not exceeding 1000 ltrs lowering from its position and removal to store, complete all as specified and as directed.(4+4)

Taking down rain water / vent pipe of any description including fittings etc including removal to store, complete all as specified and as directed.(25+0)

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr deep and getting out complete in soft/loose soil, complete all as specified and as directed. (13+0)

Returning, filling in, including spreading, leveling watering and well raming in layers not exceeding 25cms thick complete all as specified and as directed.(8.50+0)

Removal of surplus soil to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed. (4.50+0)

M&LPCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in benching, coping, hold fast blocks etc., and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., complete all as specified and as directed.(0.40+0)

M&LRCC 1:2.4 type B-1 ( using 20mm graded crushed stone aggregate) as in shelves and similar type of work including necessary form work, complete all as specified and directed.(.50+0)

M&LPrecast cement concrete 1:2.4 type B-1 ( using 20mm graded crushed stone aggregate) as in manhole covers and similar type of work including necessary form work, complete all as specified and directed.(0.50+0)

M&LBrick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6, complete all as specified and as directed. (5+8)

M&LCutting opening thorugh brick wall built in cement mortar for door/window opening includeing removing rubbish off the site to a distance not exceeding 50mtr, complete all as specified and as directed. (0.80+0)

M&L18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 15 mm thick screed bed in cement mortar 1:4 including rounding to edge of granite as per required, complete all as specified and as directed.(10+0)

M&LFirst class teak wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joint., complete all as specified and as directed. (0.06+0)

S&F first class teak wood panelled shutter 35mm thick (any number of panel) with panels of timber flat on both sides complete all as specified and as directed(3.70+0)

M&LSolid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.(0+40)

M&LFactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.(0+14)

S&F Elastic PVC beading for sliding doors, complete all as specified and as approved by Engr-in-Charge. (15+0)

S&FStainless steel brackets for fixing of toughened glass to walls, floors as required, complete all as specified and as approved by Engr-in-Charge. (16+0)

S&F Decorative type cornies of suitable width on wall and ceiling edges/ corners with plaster of paris sheets fixed with machine screws including prepration of surface and applying one coat primer and two coat of plastic emlusion paint, complete all as specified and as approved by Engr-in-Charge. (30+0)

M&L for High Density (HD) board with laminated wood work including stainless steel baskets of required size mounted on suitable channels including ball bearing to moving of baskets smoothly including all necessary fittings and fixture complete all as speified and as directed. Make, kohler, hettich and Godrej Note , Front face will be measured for payment purpose.(2.50+0)

M&L100mm size butt hinges (stainless steel) colled rolled mild steel, complete all as specified and as directed.(0+27)

M&LExtruded aluminium alloy handles cast type anodised of size 125mm size, complete all as specified and as directed.(0+18)

M&LAluminium anodized 125mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.(0+18)

M&L250mm fancy type Stainless steel door handles fixed to glas doors, complete all as specified and as directed. (6+0)

M&LStainless steel universal door assembly for glass door including top and bottom pivot, floor machine, floor door spring for smooth operation including all necessary fittings and fixtures for fixing of door, complete all as specified and as directed. (3+0)

M&L in repair Stainless steel Curtain Rod 25 mm dia including brackets and fancy type end bulbs etc., fixed in repairs, complete all as specified and as directed.(50+0)

S&FAluminium alloy Powder coated standard hollow section for ventilators as per approved sample and as per IS specifications, shutters weighing 0.55 kg/m, rectangular frame of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges etc., as per standard fittings, complete all as specified and as directed.(0+2)

M&LTMT bars upto 10mm dia and over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.(90+0)

M&LJoist, Channel, angle,or tee sections, fixed independently without connecting plates, etc.( cut to ordinary lengths ie with in 20mm of the length indicated) complete all as specified conforming to 410 - W(Gde E - 250 quality A), complete all as specified and as directed.(200+0)

M&LAngle Iron sections as in roof trusses (framed), trussed purlins, rafters, standing poles, crane gantries, rails and fastenings and heavy brackets framing including distance pieces, cleats etc., conforming to Fe-410W Gde E- 250 quality A, complete all as specified and as directed.(0+8800)

M&LSteel rolling shutters (Gear operated)1.25mm thick with required Ball bearing for rolling shutters, including shaft, top cover, guide channel (width 75 mm deep, 50mm wide and 3.15mm thick), anchoring rod, hasp and staple erected in position as directed complete including required bevel gear box and crank handle Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and as directed.(0+280)

M&LPre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.(0+695)

M&L Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and as directed.(0+35)

M&LSupply only liquid water proofing compound, to be mixed in cement mortar or concrete as per proportion specified by manufacturer, complete all as specified and as directed. (5+0)

M&LE-board 'Everest' make or equaivalent as approved by GE 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction complete all as specified and as directed. (0+520)

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center. Including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long, complete all as specified and as directed.(112+0)

M&LProviding and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) including sunk or raised mouloding, complete all as specified and as directed. (70+0)

M&LProviding and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh (fillet, Metal frame work and GI Wire mesh paid seprately), complete all as specified and as directed. (42+0)

M&L50mm thick Cement concrete type B-2, 1:2:4 (using 40 mm graded crushed stone aggregate) in sub base of flooring/ hard standing, complete all as specified and as directed. (0+620)

M&L25mm thick Cement concrete type B-0, 1:2:4 (using 12.50 mm graded crushed stone aggregate) over subbase to receive floor finishing or as in levelling course complete all as specified and as directed.(110+0)

M&LMachine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed bed 20 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.(0+620)

M&L75mm thick plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top without using extra cement and providing joints 40mm deep and 12 mm wide in plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as and as directed.(25+0)

M&LVitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.(0+80)

M&L Vitrified ceramic tiles dark shade 10mm thick (square/rectangular) area of each tile exceeding .42sqm but not exceeding , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in cement mortar 1:4, complete all as specified and as directed. (65+0)

M&LVitrified tiles light shade 10mm thick (square/rectangular) area of each tile exceeding 0.42Sqm tile not exceeding 1.00Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. (45+0)

M&LJoint free anti skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile not exceeding 0.11Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick average screed bed in cement mortar 1:6, complete all as specified and as directed.(0+35)

M&LNon skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.38Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick average screed bed in cement mortar 1:6, complete all as specified and as directed. (25+0)

M&LColoured Glazed ceramic tiles in vertical surface 300mm x 200mm x 7-8 mm thick, such as skirting, dados, etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.(0+90)

M&LColoured Glazed ceramic tiles in vertical surface 600mm x 300mm x 7-8 mm thick, such as skirting, dados, etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.(50+0)

M&LRendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and as directed. (0+520)

M&LRendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC as per manufacturers instruction and finished even and smooth without using extra cement, complete all as specified and as directed. (110+60)

M&LRendering 5mm thick on ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, complete all as specified and as directed. (40+0)

M&LPreparation of new plaster internal wall and ceiling surfaces and applying a layer of wall care putty, sand papering to making surface smooth and applying Two coats of Interior plastic emulsion paint premium quality over a coat of primer,as per manufacturers instructions complete all as specified and directed. (0+520)

M&LPreparation of newly plastered external surfaces of walls and applying a layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applyingg Two coats of weather proofing exterior acrylic emulsion paint premium quality over a coat of primer as per manufacturers instructions complete all as specified and as directed. (0+60)

M&Lcomplete removal of existing treatment of walls and applying two coat of weather proof exterior emulsion paint white or tinted over one coat of primer as per manufactureres instructions complete all as specified and as directed. (240+0)

M&LPreparation of Old plastered/unplastered surfaces of walls a applying Two coats of exterior acrylic emulsion paint premium quality over a coat of wall primer, complete all as specified and as directed.(550+0)

M&LPreparation of newly unplastered or unplastered surfaces of walls and applying 2mm thick birla/JK white wall care putty to make the surfaces smooth for further tereatment, complete all as specified and as directed. (100+0)

M&LPreparation of newly unplastered or unplastered surfaces of ceilings and applying 2mm thick birla/JK white wall care putty to make the surfaces smooth for further tereatment, complete all as specified and as directed. (40+0)

M&LComplete removal of existing treatment on surfaces of walls and applying 2mm thick birla white wall care putty to make the surfaces smooth for further treatment, complete all as specified and as directed.(240+0)

M&LAll same as per ser item no 79 here-in-before but on celling (25+0)

M&L preparation of new / old plasted surface of wall and applyingg two coats of Plastic emulsion paint over a coat of primer, complete all as specified and as directed. (600+0)

M&LAll same as per ser item no 81 here-in-before but on celling (200+0)

M&LPreparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide, complete all as specified and as directed. (0+520)

M&L110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and as directed. (10+0)

M&LCutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves concealed water tubing and making good, cutting n.exc 10cm girth in brick wall, complete all as specified and as directed by Engr-in-Charge.(100+0)

M&LSteel water tubing galvanised 15mm bore medium grade with all fittings fixed to walls, under floors and on ceiling surfaces, complete all as specified and as directed.(80+0)

M&LSteel water tubing galvanised 20 mm bore medium grade with all fittings fixed to walls, under floors and on ceiling surfaces, complete all as specified and as directed.(35+0)

M&LRotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.(4+4)

S&FVitreous china wash down water closet pan wall hung WC FLS - IVY- 5951 with PP seat cover, hinges, accessories set, size 360 545x365 set jaquar or other equivelent , including flushing cistern and fixed with brass screws, complete all as specified and as directed.(4+0)

S&F in repair China water closet Orissa Pan 580mm X 440mm long pan Ist quality ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces, , complete all as specified and as directed. Make: CERA/Hind ware/Somany/Jaquar. (0+12)

S&F in repair 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend and fixing on walls with bracket, fixed in repairs, complete all as specified and as directed. Make: CERA/Hind ware/Somany/Jaquar.(0+12)

M&LVitreous china wash table top type size 530X420X140 MM fixed in repairs over gragite slab with all fittings and fixtures complete all as specified and as directed. Make Jaquar Cat Part No JDS-WHB-25007N or equivalent in Hindware or Kohlar(4+0)

S&F in repair fancing type single lever basin mixer with popup waste and 450mm long braided house for 15mm bore Gi pipe joints to GI pipe or unions complete all as specifed and as directed Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Kohler-Cat No. K-74013IN-4BND-CP (4+0)

S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall fittings and fixtures, flexible tube 8mm dia and 1.50m long with nuts, hand shower 105mm dia round shape single flow with air effective (ABS body and Face plate chromium plated) with rubit cleaning system complete all as spd. (Make Jaquar Cat No : FUS-29281 or equivalent in Kohlar or Hindware)(4+0)

S&F in repairs fancy type single lever sink mixer with 210mm extension body swinging spout without popup waste (table mounted) with 600mm long braided house screwed for iron pipe, 15mm bore complete all as spd (make jaquar cat no LYR-38173B or equivalent in Kohlar or hindware (1+0)

M&LBib taps, (Long body) cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-047KN Kohler-Cat No.K-37341IN-4-CP (5+10)

M&LPVC connection 15mm sizes with PTMT nuts of length 600 mm, fixed in repairs, complete all as specified and as directed.(0+10)

M&LPVC connection 15mm sizes with PTMT nuts of length 450 mm, fixed in repairs, complete all as specified and as directed.(25+0)

M&LBrass chromium plated towel rail of size 600 mm size, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) (4+0)

M&LTowel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. (Make : Jaquar/Marc/Kohler). (4+0)

M&LBrass chromium plated towel rack of size 600 mm size with lower hanger, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)(4+0)

M&LStainless steel kitchen sink made of 1mm thick sheet for kitchen with plug, washers, waste,connecting union, cast iron cantilever bracket overall size 495mmx 420mm bowl size 410 mmx 330 mmx 160mm, fixed in repairs, complete all as specified and as directed. Make- Maharaja/Nirali/Prayag.(0+10)

M&LAngle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-059KN or Kohler-Cat No.K-80158IN-9-CP or equivalent in Marc(28+0)

M&L CP Grating doom 125mm dia with or without waste hole, fixed in repairs, complete all as specified and as directed. (5+0)

M&LPVC waste pipe 40/32mm dia 85cm long suitable for WHB/Sink, fixed in repairs, complete all as specified and as directed. (2+0)

M&LStainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket over all size overall size 915mmx 460mm bowl size 410 mmx 330 mmx 160mm, fixed in repairs, complete all as specified and as directed. Make- Maharaja/Nirali/Prayag.

M&LCast copper alloy CP toilet paper holder fixed with plug and brass screws, fixed in repairs, completed all as specified and as directed. (Make- Jaquar Cat No- AAHS-1551 or equivalent in Kohlar/Hindware/Cera).(4+0)

M&LCorner glass self with CP bracket, fixed in repairs, complete all as specified and as directed. (Make : jaquar code : ACN - 1173 or equivalent in Kohlar/Hindware/Cera). (4+0)

M&LFlushing jet of approved make for pedestal pattern water closet including flexible pipe fixed complete to EWC any type, fixed in repairs, completed all as specified and as directed. (4+0)

M&LHealth faucet chromium plated brass, fixed in repairs, completed all as specified and as directed. Make - Jaguar cat No-ALD573 or equivalent in Kohlar/Hindware/Cera). (4+0)

M&L in repair 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, fixed in repairs, completed all as specified and as directed. (4+0)

M&L in repair Gun metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, completed all as specified and as directed.(4+0)

M&L110mm bore PVC(SWR) pipe single socketed in any length with rubber ring joints, to wall complete all as specified and as directed. (9+0)

M&L75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and as directed. (10+0)

M&LPVC bend 110mm bore any radius, fixed in repairs, complete all as specified and as directed. (4+0)

M&LPVC bend 75mm bore any radius, fixed in repairs, complete all as specified and as directed. (6+0)

M&L PVC SWR junction 110mm bore (Single T) equal or unequal with access door, fixed in repairs, complete all as specified and as directed. (4+0)

M&L75mm bore PVC (SWR) floor trap, with grating including jointing with solvent cement, complete all as specified and as directed.(6+0)

M&LConcrete bed to drain pipes in PCC 1:4:8 type D - 2 using 40mm grade stone aggregate to drain pipes including forming cradels for 150 mm dia bore pipe , complete all as specified and as directed.(28+0)

M&L DWCPE (SN8) nominal size 163 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed. (30+0)

M&LTaking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, complete all as specified and as directed. (67+139)

M&LPoint wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size / incl 1.6mm thick of required size (factory made) MS pressed steel terminal boxes with 3mm thick plastic laminated sheet cover with brass screws for non modular switches /sockets etc and making good surface as original by plastering, whitewash/colour and distemper etc complete all as specified and as directed for the following :- (45+75) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

All as per description of Srl item No. 123 here-in-before but for one socket outlet 5/6 Amps on same board.(10+10)

All as per description of Srl item No. 123 here-in-before but for one socket outlet 5/6 Amps on independent board.(6+42)

M&LAll as per description of Srl item No. 122 here-in-before but with 2.5qmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and 2.5Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked as earth wire for one socket outlet 16 Amps on independent board.(6+0)

M&L All as per description of Srl item No. 123 here-in-before but with 4.0Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and 4.0Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked as earth wire for one socket outlet 16 Amps on independent board.(0+12)

M&L in repair TV wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed, copper cable having single strand of 0.7mm dia taped TV wiring and making all necessary connections from terminal box to TV socket, drawn into and through separate concealed PVC conduit, complete all as specified and as directed. Make : Standard/Havells/RR Kabel(20+0)

M&L in repairTelephone wiring with twin core PVC insulated, PVC sheathed, copper cable suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn into and through separate concealed PVC conduit, complete all as specified and as directed. Make : Rallison/Havells/L&T.(20+0)

M&L Switch piano flush type, single pole, 01 way, 6 Amps, complete all as specified and as directed. (0+127)

M&L Switch piano flush type, single pole, 01 way, 16 Amps, complete all as specified and as directed. (0+12)

M&L Socket outlet two-in-one, 5 pin, 6 Amp universal type, single pole, complete all as specified and as directed. (0+52)

M&LSocket outlet two-in-one, 5 pin, 16 Amp universal type, single pole, complete all as specified and as directed. (0+12)

M&L in repair Modular switch, single pole, 01 module, 6 Amps, complete all as specified and as directed. (59+0)

M&L in repair Modular socket two-in-one, 5 pin, 6 Amp universal type, 02 module, complete all as specified and as directed. (16+0)

M&L in repair Modular switch, single pole, 01 module, 16 Amps, complete all as specified and as directed. (6+0)

M&L in repairModular socket two-in-one, 6 pin, 16/6 Amp multipurpose type, 02 module, complete all as specified and as directed. (6+0)

M&L in repair Modular bell push, single pole, 01 module, 6 Amps, complete all as specified and as directed. (2+0)

M&L in repair Modular stepped type fan regulator 120Watt, 01 module, complete all as specified and as directed. (4+0)

S&F Earthing complete with GI earth plate electrode 600 mm x 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia medium grade for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation, complete all as specified and as directed. (1+0)

M&L in repair Modular bell, single pole, 02 module, 6 Amps AC 230 volts, complete all as specified and as directed. (2+0)

M&L in repairModular Telephone socket Jack (RJ-11) 01 Module size as per site requirement, complete all as specifed and as directed.(2+0)

M&L in repair Modular TV socket Jack 01 Module size as per site requirement, complete all as specifed and as directed.(2+0)

M&L in repair Ceiling rose, insulated body, 3 terminal, 240 volts 6Amp, complete all as specified and as directed. (20+15)

M&L in repair Replacement of LED Mirror light 10/12W diffuser, driver including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.(2+0)

M&L in repair Replacement of Wall mounting LED tube light fitting, 22 watt including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.(6+0)

M&L in repair replacement of Recess mounting 2'x2' square flat panel ultra slim scoop LED light 36 W cool white 5600-6000K, input voltage 110-240 volt, 50 Hz with driver/transformer etc suitable for AS/GB/POP ceiling including making electric connection, complete all as specified and as directed.(0+30)

M&L in repair replacement of decorative wall mounted LED light fitting including 10Watt LED bulb including making electric connection, complete all as specified and as directed. (4+0)

M&L in repair replacement of LED bed side flexible arm lamp 7Watt including making electric connection, complete all as specified and as directed. (4+0)

M&L in repair replacement round recess mounted downlight slim type f LED luminare light 6Watt cool white input voltage 230volts, 50Hz with driver/transformer etc., suitable for AS/GB/POP ceiling including making electric connection, complete all as specified and as directed. (24+0)

M&L in repair replacement of flexible LED Strip light 30Watt 5mtr long cool/warm white including driver and including making electric connection, complete all as specified and as directed. (8+0)

M&L Ceiling fan1400mm sweep with blade, down rod, regulator, accessories cable copper wound motor, 240volts, 50Hz, 5 Star BEE rating, complete all as specified and as directed. (0+30)

M&L Taking down ceiling fan1400mm and refixing in same opening after rewinding with copper winding wire of same gauge, replacement of unserviceable capacitor, bearing, clamp, flexible cable including boiling and greasing, complete all as specified and as directed. (4+0)

M&L Taking down geyser 25/35Litres capacity and refixing in same opening after replacement of unserviceable element, thermostat, PVC connections and flexible cable, complete all as specified and as directed. (2+0)

M&L Taking down energy meterland refixing in same opening after change of connection wiring, complete all as specified and as directed. (2+0)

M&L in repair Exhaust fan 250mm sweep plastic body heavy duty including fixing in opening and making all necessary electric connections, complete all as specified and as directed.(2+0)

M&L Exhaust fan 450mm sweep metallic body heavy duty including fixing in opening and making all necessary electric connections, complete all as specified and as directed.(0+5)

M&L Wall mounting fan 400mm sweep aerodynamic designed air delivery >70CMM, thermal overload protected motor, 3 blade of white colour 230 volts, 1420RPM with 90 Degree oscillation and having speed and oscillation control by two pull cords system, complete all as specified and as directed. (0+18)

M&L Wall mounting fan 300mm sweep aerodynamic designed air delivery >70CMM, thermal overload protected motor, 3 blade of white colour 230 volts, 1420RPM with 90 Degree oscillation and having speed and oscillation control by two pull cords system, complete all as specified and as directed. (2+0)

M&L in repair of Key switch 2/3 Module 32Amp DP unit switch with key tag, complete all as specified and as directed. (2+0)

M&L in repair Modular AC box, SPN type with three pin plug and socket with and including one MCB SPN, C Curve type of capacity 25 Amp, 10 KA, complete all as specified and as directed.(6+0)

M&L in repair MCB DB conforming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar, connection complete and making good the disturbed surfaces, complete all as specified and as directed. (2+4)

M&L MCB DB conforming to IP 43 - IK 09 with double door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar, connection complete and making good the disturbed surfaces, complete all as specified and as directed. (0+2)

M&L in repair MCB C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed. (18+38)

M&Lin repair MCB C Curve type, 10 kA, Single Pole and Neutral of 40 to 63 Amp capacity, complete all as specified and as directed. (2+2)

M&L in replacement for laying of LT underground cable XLPE insulated PVC sheathed galvanised steel strip/wire armoured aluminium conductor, 1000 volts grade of size 35 sqmm 4 core suitable for earthed system laid in duct/trench along pole wall etc including making connection complete all as directed.(40+0) (Note : 1. The cost of Aluminium thimbles/lugs and cable gland etc. shall be deemed included in quoted rate and no extra payment will be made for it. 2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid separately under respective items).

M&L Brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable, complete all as specified and as directed. (261+0)

M&L Sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed.(250+0)

M&L in repair Sub main wiring with 2 run of 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble, complete all as specified and as directed.- (100+40) (Note : 1. The conduit and conduit accessories with 2run of main wire and one run of earth wire shall be measured and paid as one unit.

M&L in repair Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble, complete all as specified and as directed.- (20+60) (Note : 1. The conduit and conduit accessories shall be measured and paid as one unit.

M&L in repair factory made epoxy powder coated load line distruibution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200Amp copper bus bar isloated neutral bar standard DIN rail, Earth bar and cable ties for cable management top and bottom removeable gland plates with knockouts and suitable for one TPN-MCCB 125/160 Amp as incomer and 32 to 63 Amp SP MCBs outgoing complete all as specified and directed by Engr-in-Charge

M&L MCCB 4P 125 Amp, thermal magnitic setting with breaking capacity 16 KA 415 volts, complete all as specified and as directed. (0+1)

M&L MCCB 4P 160 Amp, Adjustable type with breaking capacity 36 KA 415 volts, complete all as specified and as directed.(1+0)

M&L LED security light luminaire 45 watt pressure die cast aluminium housing with heat resistance toughned glass and IP- 66 protection with and including driver/transformer and including connector, complete all as specified and as directed.(0+10)

M&L in repair LED security light luminaire 30 watt pressure die cast aluminium housing with heat resistance toughned glass and IP- 66 protection with and including driver/transformer and including connector, complete all as specified and as directed.(1+0)

M&L Street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc., inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.(1+10)

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

V r traders