REPAIRS TO INTERNAL WATER SUPPLY, JOINERIES, ROOF SHEETS AND REPAIRS TO TILLING, FLOORING, GRANITE STONES/TILES, SANITARY FITTINGS ETC OF CERTAIN BUILDINGS AT COLLEGE AREA AT DSSC WELLINGTON.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors for levelling off and pavings n.exc 15 cm thick (below or above ground level) and removing unserviceable debris off the premises all as specified and directed..

M & L for providing 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in subbase of flooring complete all as specified and as directed.

M & L for providing 40 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in subbase of flooring complete all as specified and as directed.

M & L for providing 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in subbase of flooring complete all as specified and as directed.

M & L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm in vertical surfaces like skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering/ backing coat 10 mm thick in CM (1:3) complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm in vertical surfaces like skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering/ backing coat 10 mm thick in CM (1:3) complete all as specified and directed.

M & L for Granite tile 10 mm thick machine cut, as in flooring rounding edges , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over 15mm thick screed bed in CM 1 :4 complete all as specified and as directed.

M & L for Granite tile 10 mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over and including rendering/ backing coat 10 mm thick in CM 1 :3 complete all as specified and as directed.

M & L for Granite stone slab in flooring of approved colour 16-18 mm thick machine cut, leather finished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in CM (1 :4) complete all as specified and directed.

M & L for Granite stone slab in skirting/dado of approved colour 16-18 mm thick machine cut, rounding edges , leather finished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including rendering/ backing coat 15 mm thick in CM (1:4) complete all as specified and directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for coloured glazed ceramic tiles 600 x 300 x 7mm thick, as in vertical surfaces such as dados/ skirtings etc., set jointed in cement slurry & pointed in white cement or coloured cement to match, laid over and including rendering/ backing coat 10 mm thick in CM (1:3) complete all as specified and directed.

S & F in repairs vitreous china squatting pan "Orissa pattern" long pan, size 580 x 440 mm, white, with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in cement concrete including making good to floor surfaces complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern) white including all accessories and connection complete all as specified and directed.

S & F in repairs wash down water closet pedestal pattern cascade with dual flushing cistern all as specified and directed. Make : Parryware (Popular) Cat No: C0232/86 for Closet , Cat No : C0711 for Cistern, Cat No : C02054 for Cistern Lid , Cat No : C8300 hush seat cover & Cat No : C8016 for fittings or equivalent in Jaquar /Cera/ Hindware.

S & F in repairs vitreous china half stall urinal white complete including providing CP waste coupling and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and as directed. Make: Parryware, Cat No: C0575 (Magnum) for Half Stall Urinal or equivalent in Prayag/ Cera/ Hindware/ Jaquar

S & F in repairs urinal magnum half stall type including spreader, CP waste coupling all as specified and as directed. Make : Parryware (Popular), Cat No : C 0587 integrated EFC AC with power source (Auto Flush), Cat No : C8095 for Urinal Spreader or equivalent in Prayag/ Cera/ Hindware/ Jaquar

S & F in repairs urinal magnum half stall type including spreader without auto flush, white colour complete all as specified and as directed. Make : Parryware, Cat No : C0583 (Combo Set) or equivalent in Prayag/ Cera/ Hindware/ Jaquar

S & F in repairs of sensors assembly for auto flush and making good the disturbed surfaces complete all as specified and as directed. Make : Parryware, Urinal code : EFS N-PCB(DC) Assy new or equivalent in Jaquar/ Cera/ Prayag/ Hindware

S & F in repairs of sensors of valve assembly for auto flush and making good the disturbed surfaces complete all as specified and as directed. Make : Parryware, Urinal code : SMART EFS SOLENOID VALVE Assy or equivalent in Jaquar/ Cera/ Prayag/ Hindware

S & F in repairs of sensors of power assembly for auto flush and making good the disturbed surfaces complete all as specified and as directed. Make : Parryware, Urinal code : C741199 Assy power sourCe for SMART HAWNE TAP A/C or equivalent in Jaquar/ Cera/ Prayag/ Hindware

S & F in repairs WHB round bowl coloured counter top type of size 550 x 445 mm, with pillar tap of fancy type, mounted over 18 mm thick polished granite slab complete all as specified and as directed. Note : Granite work shall be measured and paid seperetaly. Make for WHB : Parryware, Cat No : C0431 or equivalent in Prayag/ Jaquar/ Cera/ Hindware Make for PillarTap : Parryware, Cat No :G3402A1 or equivalent in Prayag/ Jaquar/ Hindware/ Cera

S & F in repairs vitreous China clay WHB flat back of size 550 x 400 mm including PVC waste pipe 32 mm dia, CP waste coupling brackets etc complete all as specified and directed.

S & F in repairs stainless sink 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs made of stainless steel 1 mm thick for kitchen plate rack , with plug , washers, fixing on wall, overall size 900 mm x1000 mm complete as specified and as directed.

S & F in repairs 10 litres capacity PVC valveless , syphonic action type, flushing cistern low level, white , with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S & F in repairs Health faucet with flexible tube 1 Mtr long complete all as specified and as directed. Make : Paryware, Cat No : T-9804A1 or equivalent in Prayag/ Jaquar/ Cera/ Hindware

S & F in repairs CP multi bip tap complete all as specified and as directed. Make : Parryware, Cat No : T3534A1 or equivalent in Prayag/ Jaquar/ Cera/ Hindware

S & F in repairs CP Health faucet / Hand shower holder complete all as specified and as directed.

S & F in repairs Hand shower including hose and hoocks with flexible tube 1/1.50 Mtr long complete all as specified and as directed. Make : Parryware, Cat No : T9861A1 or equivalent in Prayag/ Jaquar/ Cera/ Hindware

S & F in repairs superior quality push button taps of cast copper alloy CP, screwed for 15 mm bore iron pipe complete all as specified and as directed. Make : Parryware, Cat No : T9951A1 or equivalent in Prayag/ Jaquar/ Cera/ Hindware

S & F in repairs 15 mm bore fancy type Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs 15 mm bore fancy type long body Bib taps , cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Parryware, Cat No : T3506A1 or equivalent in Prayag/ Jaquar/ Cera/ Hindware

S & F in repairs 15 mm bore fancy type stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repairs 15 mm bore fancy type angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make : Parryware, Cat No : T3507A1 or equivalent in Prayag/ Jaquar/ Cera/ Hindware

S & F in repairs 15 mm bore fancy type pillar taps cast copper alloy,fancy type , with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and as directed.

S & F in repairs CP elbow action pillar cock, weight should not be less than 500 gms, ISI marked complete all as specified and as directed.

S & F in repairs CP toilet paper holder, fixed to wall with CP brass screws complete all as specified and as directed. Make : Parryware, Cat No : T6514A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs soap dish holder complete all as specified and as directed. Make : Parryware, Cat No : T6403A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs CP towel rail 600 mm long complete all as specified and as directed. Make : Parryware, Cat No : T6001A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs CP towel ring complete all as specified and as directed. Make : Parryware, Cat No: T6002A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. Make : Parryware, Cat No : T9985A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs chromium plated shower rod 300/450 mm long, including fixing to steel pipe and all accessories complete all as specified and as directed. Make : Parryware, Cat No : T9802A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs corner racks / shelves complete all as specified and as directed. Make : Parryware, Cat No : T6010A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs Glass shelves complete all as specified and as directed. Make : Parryware, Cat No : T6009A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs 3-in -one wall CP mixer for mixing hot & cold water, screwed for iron pipe or for brass ferrule of 15 mm bore complete all as specified and as directed. Make : Parryware, Cat No : T3517A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs 2-in -one Basin CP mixer for mixing hot & cold water, screwed for iron pipe or for brass ferrule of 15 mm bore complete all as specified and as directed. Make: Parryware, Cat No : T3014A1 or equivalent in Jaquar/ Prayag/ Cera/ Hindware

S & F in repairs CP Gratings 150 mm dia complete all as specified and as directed.

S & F in repairs 32/40 mm dia waste pipe complete all as specified and as directed.

S & F in repairs PVC connection 600 mm long complete all as specified and as directed.

S & F in repairs LED mirror with touch switch of size 800 x 600 mm with 5 mm thick glass mirror with touch switch for LED light, light weight aluminium back box carrying entire unit, double coat for protection and longevity and silver plating on the back for better reflection complete all as specified and as directed. Make : Cera, Cat No : B3530103 or equivalent in Philips/ Jaquar

S & F in repairs PVC Cabinet mirror of size 400 mm x 500 mm complete all as specified and as directed. Make : Prayag, Cat No : 554 or equivalent in Cera/ Jaquar/ Parryware

S & F in repairs looking mirror of any size using 6 mm thick mirror edges rounded fixed with SS clips including necessary frame work in stainless tubes complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal / aluminium frames including punching or drilling out old glazing pins/ spring clips complete all as specified and as directed.

S & F in repairs 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty / aluminium rubber beading in squares exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F in repairs 4 mm thick sheet glass ordinary quality and glazing wooden fillets / rubber beading in squares n.exc 0.5 Sqm in each pane all as specified and as directed.

S & F in repairs 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F in repairs door closer hydraulically regulated, aluminium cast body, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg including all accessories all as specified and as directed.

S & F in repairs brass mortice lock vertical type size 100 /150mm 4/6 levers complete all as specified and as directed.

S & F in repairs UPVC door lock vertical type any size four lever with two key complete all as specified and as directed.

S & F in repairs galvanised steel wiremesh 1.4mm dia fixed with tinned tacks of tinned tacks of wire staples size of mesh 12mm all as specified and as directed

M & L for cutting chases in stone walls , pinning in , making good to facing where required and pointing in cement mortar (1:3) to ends of edges of landing steps, cills, sunshade, shelves, lintels, etc ; and cutting chease for water tubing or concealed conduit wiring , etc, and making good cutting not exc 10 cm girth all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

Refixing 15 mm bore of pipes old steel pipes and connection in new or old position (walls, ceiling, floors etc,) all as specified and as directed.

Refixing 20 mm bore of pipes old steel pipes and connection in new or old position (walls, ceiling, floors etc,) all as specified and as directed.

Taking up or down 25 or 32mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.

S & F 25 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.

Dismantling water tank of capacity exc 500 litres and n.exc 1000 litres or accounted under schedule of credit complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tanks triple layered (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position all as specified and directed.

S & F rotational moulded polyethylene water storage tanks triple layered (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position all as specified and directed.

S & F in repairs 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min. wt 20mm-210gm) all as specified and as directed. Make : Prayag/ Polytuff

S & F in repairs PVC tank cover for 500 /1000 Ltrs capacity complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or accounted under schedule of credit (measured overall as fixed along the centre line overall as fixed along the centre line over fittings and accessories) all as specified and as directed. Note :- Rate for fixing the gutter upto 10mtr height deemed to be included in quoted rate by the contractor.

S & F 110 mm bore PVC (SWR) pipes, type 'B', with pressure rating 4 Kg/Sqm single socketed in any length with rubber ring joints laid in floors or trenches/ wall etc complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes, type 'B', with pressure rating 4 Kg/ Sqcm single socketed in any length with rubber ring joints laid in floors or trenches/ wall etc complete all as specified and as directed

S & F in repairs 110 mm PVC (SWR) WC connector bent type all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends of any radius with access doors all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends of any radius with access doors all as specified and as directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door all as specified and as directed.

S & F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement all as specified and as directed.

S & F PVC (SWR) Floor trap of 100 mm outlet plain with grating including jointing with solvent cement all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation board /slab/ blanket any thickness including cover fillets all as specified and directed.

S & F for gypsum board false ceiling 12mm thick fixed with standard GI frame work with GI fixing channels of 16 gauge, main "U" shaped channels @ 1220mm c/c and inter connected cross channels "C" shape spaced at 610mm c/c, the main fixing channels shall be fixed through GI cannels suspenders from thereof @1200c/c, Main and inter connected channels shall be fixed through fasteners clips as per manufacturer's instructions, with and including plaster of paris decorative type cornices all around at the junction of wall and ceiling etc shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and as directed.

S & F gypsum board false ceiling 12mm thick including all connecting accesserioes, and shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and as directed.

S & F for wall panelling gypsum board 12mm thick with including all connecting assesories and shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and as directed.

S & F in repairs of plaster of paris decorative type cornices 120 to150 mm size of any shape and design to be fixed all around at the junction of wall and ceiling etc and shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and as directed.

S & F for modular false ceiling systems in ArmGym-FB for Vinyl face, washable metallized polyester foil backing vinyl covered edges of 9mm thick of calciumsilicate material of size 595mm x 595mm GRG ceiling tiles shall have weight 7 Kg /Sqm and fixed with bottom face powder coated suspension system (Grid). The size of the same is 15mmx 32mm. The galvanized iron sheet of thick 0.30 mm used in the manufacturing of grid is zinc coated for preventing corrosion. The main runners are hung from the soffit with help of GI wire hanger complete with installation all as per manufacturer's instruction and as directed. Note :- Rate for fixing the ceilling upto 10mtr height deemed to be included in quoted rate by the contractor. Make: Armstrong/ Diamond/ Saint Gobain.

S & F for repair only modular false ceiling board 9mm thick of calciumsilicate material of size 595mm x 595mm GRG ceiling tiles shall have weight 7 Kg /Sqm all as specified and directed. Note :- Rate for fixing the ceilling upto 10mtr height deemed to be included in quoted rate by the contractor. Make: Armstrong/ Diamond/ Saint Gobain.

S & F in repairs on toughned glass, door/partition 10mm thick including making holes in glass and all accessories for fixed in position all as specified and directed.

S & F in repairs on toughned glass, door/partition 8mm thick including making holes in glass and all accessories for fixed in position all as specified and as directed.

S & F in repairs aluminium coated curtain rods brackets antique finish with doom suitable for single curtain rods of 25 mm fixed in position with appropriate screws all as specified and as directed.

S & F in repairs 25mm dia aluminium coated designer curtain rods antique finish fixed to bracket matching with curtain rods in fixed in position all as specified and directed.

S & F for mild steel work in tubular post, trusses including special shaped washer etc.,complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade E-250 all as specified and as directed.

S & F for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders framed balusters; walk ways railings ; framework of water tanks and similar work confroming to Fe 410-0 or Fe 310-0 all as specified and directed.

M & L for preparation of new/previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed.

S & F for pre-painted Galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding to wall fixed with self tapping screws all as specified and directed.

Fixing only pre-painted Galvalume aluminium Zinc cooating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding to wall fixed with self tapping screws all as specified and as directed.

S & F for pre-painted Galvalume aluminium Zinc coating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding to wall fixed with self tapping screws all as specified and directed.

Fixing only pre-painted Galvalume aluminium Zinc cooating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding to wall fixed with self tapping screws all as specified and as directed.

S & F for Pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50mm thick of any colour and in crimp for awning /roof covering/ sunshades having tensile strength of 550 Mpa fixed with screws/hooks type complete all as specified and as directed.

S & F for Pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50mm thick of any colour and in circular /Arch shape as in roof covering /sunshades having tensile strength of 550 Mpa fixed with screws/hooks type complete all as specified and as directed.

M & L for complete removal of existing treatment from old plastered surfaces of ceiling and walls and applying two coats of Anti fungal Paint of Make : Asian Paints (Royale Shyne) or equivalent in Shalimar/ Berger/ Dulux Paints, (coloured/white) over a coat of deco prime primer over and including one coats of wall care putty with brush/roller, finished even and smooth complete all as per manufacturer's instruction and as directed.

M & L for complete removal of existing treatment on wall by scrapping , washing, rubbing down and stopping of distempered and applying two coats of oil bound distemper over a coat of primer over wall care putty on walls all as specified and as directed.

M & L for applying one coat of distemper oil emulsion on old decorated surfaces of walls including preparation of surface by washing, rubbing down and stopping of distempered surfaces all as specified and directed.

M & L for preparation of old surfaces of stone retaining wall, plaster surfaces etc., and applying one coat of acrylic emulsion exterior grade on wall complete all as specified and as directed.

M & L for preparation of old surfaces of stone retaining wall, plaster surfaces etc., and applying two coats of acrylic emulsion exterior grade on wall complete all as specified and as directed.

Removing of bushes, shurbs and vegetation from stone masonary retaining walls at any height upto 8.00m and making the surface clean by removing waste complete all as specified and as directed.

M & L for preparing surfaces, plastered or unplastered old surfaces of walls and applying two coats of cement base paint any shade as approved complete all as specified and as directed.

S & F in repairs for 1213 x193 x 8mm thick / or any size laminate wooden flooring having abrasion class AC4/ class 32 with interlocking system and corner and edges profiles over 1mm thick plastic sheet and 2mm thick form complete laid all as per manufacutures instructions and as directed.

S & F in repairs 8 mm thick pre-engineered hard wood wall panelling with planks fixed with screws to timber frame work including 8mm thick plywood complete all as specified and as directed.

S & F in repairs for 9 mm thick prelaminated particle board , interior graded, preliminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws, fixed to aluminium/ timber frame all as specified and as directed.

S & F in repairs for 12 mm thick prelaminated particle board , interior graded, preliminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws, fixed to aluminium/ timber frame all as specified and as directed.

S & F in repairs for 12 mm thick prelaminated particle board , interior graded, preliminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws, fixed to aluminium/ timber frame all as specified and as directed.

Fixing only prelaminated particle board any size or thickness including all accessories fixed to aluminium/ timber frame all as specified and as directed.

S & F in repairs for 1.5 mm thick decorative laminates type I, or surface finish, colour and pattern making good with accessories as approved all as specified and as directed.

S & F in repairs for hardwood (solid wood) flooring of species white oak solid of size 1200 x 150mm x 18mm thick prefinished with aluminium oxide with UV cured coating , tongue and grove on all four side locking and maximum 1mm micro bevel "V" grove along all joints over 8mm thick plywood BWR type BB5 ply fixed with pneumatic nails over 2mm thick polyurethane foam including battens complete all as specified and as directed. Make of Hardwood: FLORZ /NOVAR /EGO /TRYSQUARE or equivalent as approved by GE

S & F in repairs powder coated aluminium door/ windows / partition etc., with one or more rebates using suitable size standard aluminium sections including jointing cleat, glazing clips, rubber neoprene packing including necessary accessories like handles, hinges etc complete all as specified and as directed.

S & F in repairs anodised aluminium door/ windows/ partition etc., with one or more rebates using suitable size standard aluminium sections including jointing cleat, glazing clips, rubber neoprene packing including necessary accessories like handles, hinges etc complete all as specified and as directed.

Taking down chowkhats or frames n.exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

S & F second class hard wood (Sal) plain, solid, straight as in chowkhat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F for 30 mm thick second class hard wood plain, framed, panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S & F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used & edges will be painted to match with printed sheet complete all as specified and as directed.

S & F factory made solid PVC moulded door shutter with particle board core , 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back face in the frame at site as per specification and drawing complete all as specified and as directed.

S & F for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.

S & F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised and fixed all as specified and as directed.

S & F in repairs 100 mm long medium weight, cold rolled mild steel Butt hinges ISI marked complete all as specified and as directed.

Taking down aluminium door/ partition including glass / particle board complete all as specified and as directed.

M & L for White/ Coloured UPVC fixed ventilators all as per manufacturer's direction and following specifications :- (i) UPVC ventilator frame shall be fixed made of PVC material confirming to IS 10151, the frame shall be made of extruded UPVC section having over all dimension of 60 x58 & 72 x 60mm having wall thickness 2mm ± 0.2mm. (ii) Corners of wall frame shall be shall be jointed by MS galvanized brackets mitred and plastic welded the hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (iii) The profiles should be three chamber system which shall provide high insulation properties. (iv) All the hardwares like friction stays, handles should be screwed with self tapping screws. (v) Glazing system should be glazed with 5mm thick plain glass/louvers fixed in ventilator frame and all as per manufacturer's instructions and as directed. Make: Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

M & L for White/Coloured UPVC sliding windows with glazing all as per manufacturer's direction and following specifications :- (i) UPVC window frame shall be made of PVC material confirming to IS 10151, the Window frame shall be made of extruded UPVC section having overall dimension of 112 x 52 having wall thickness 2.5 mm ± 0.2 mm . (ii) Corners of wall frame shall be shall be joined by MS galvanized brackets. Joints shall be mitred and plastic welded . (iii) The hinge side of vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (iii) The profiles should be two or three chamber system which shall provide high insulation properties. (iv) Glazing shall be 5mm thick Plain / frosted glass fixed with appropriate size beading as per manufacurer's specifications. (v) Stainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter. Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

M & L for UPVC door white/coloured all as per manufacturer's direction and following specifications :- (i) The profile for construction of UPVC Door will be of overall size 60 x 58 mm with wall thickness 2.7 ± 0.2 mm extruded sections. (ii) The corners shall be plastic welded. The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness ± 1.2 mm. (iii)The door will be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 3 Nos on each side. (iv) The top portion of door shall be provided with plain/frosted glazing of 6 mm thick fixed to door gutter with UPVC standard beadings of 24.5 x 16 mm of 2 mm thick. (v) The bottom portion of door for 1 m height will be provided with UPVC hollow board not less than 6 mm thick. (vi) The door shall be provided with :- (a) Moritise lock of brass size minimum 100mm four lever with two keys as per manufacture's specification. (b) Two Nos of fan light pivot size 170mm on one shutter. (c) 03 nos of 3D hinges on each shutter. (vii) All the fittings shall be provided with using self tapping screws. Note: The entire fixing will be done as per manufacturer's instructions and specification and as directed. Make: Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

M & L for white/coloured UPVC partition complete all as per manufacturer's instructions and following specifications all as directed:- (i) UPVC partition frame shall be made of material confirming to IS 10151 of extruded UPVC section having over all dimension of 65 x 55 having wall thickness 2mm ± 0.2mm. (ii) Corners of frame shall be jointed by MS galvanized brackets mitred and shall be plastic welded. (iii) The profiles should be single chamber system which shall provide high insulation properties. (iv) Glazing shall be 6mm thick frosted glass fixed in frames with appropriate beading as per manufacturer's specification. (v) The bottom portion of partition for 1 m height and above 2.1m hight will be provided with UPVC hollow board not less than 6 mm thick. Make: Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

Taking down rolling shutters of any thickness with top cover, anchoring rod, hasp and staple complete all as specified and as directed.

S & F 1.25mm thick steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and applying one shop coat of primer, errected in position as indicated, gear operated type with level gear box and crank handle complete all as specified and as directed.

S & F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S & F ball bearing for rolling shutters suitable for any dia suspension shaft complete all as specified and as directed.

S & F tension springs of rolling shutter suitable for any dia suspension shaft, complete all as specified and as directed.

S & F for MS pipe heavy duty any dia of suitable for shaft of rolling shutter including dismantling the old rusted broken shaft and positioning with all accessories, complete all as specified and as directed.

M & L for preparation of new/old surface steel rolling shutters of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Taking down gear type rolling shutters of any description and size including top cover, cleaning the helical wire spring, anchoring rod, guide channels etc and greasing /oiling to all moving parts of rolling shutter including straighting the anchoring rod, bracket plate for smooth functioning, replacement of damaged /worn out lath 1.25 mm thick and re-fixing the rolling shutter with top cover and making good the disturbed portion complete and applying two coats of synthetic enamel paint on both sides of the shutter complete all as specified and as directed. Note : The unit quoted rate deemed to be included for minor repairs , welding and replacements of nut & bolts if required.

Demolition of brick or stone/ boulder masonary, built in cement mortar and removing unserviceable debris off the premises complete all as specified and as directed.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., and removing unserviceable debris off the premises all as specified and as directed.

M & L for rendering 15 mm thick in CM (1:4) mixed with liquid WPC on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.

M & L for rendering 15 mm thick in CM (1:6) mixed with liquid WPC on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.

Supply only Liquid water proofing compound complete all as specified and as directed.

M & L for preparation of new decorated surfaces and applying two coats of acrylic emulsion exterior grade on wall over a coat of primer complete all as specified and as directed.

M & L for preparation of new decorated surfaces and applying two coat of distemper oil emulsion over a coat of putty finish and a coat of alkaline resistant primer complete all as specified and as directed.

M & L for servicing of aluminium doors/windows of any description and size by taking down the shutters,easing the shutters, tightening of screws, nuts, bolts hold fasts, replacing of broken pivot hinges and rubber beadings/clips/rollers and making good/smooth functioning all as specified and directed.

M & L for servicing UPVC doors/windows of any description any size by taking down the shutters, easing the shutters, tightening of screws, nuts, bolts hold fasts, replacement of broken latches and rbber/plaster beading/clips/rollers and making good smooth functioning all as specified and direcetd.

M & L for Antitermite treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

M & L for Antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Rounding to edeges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S & F in repairs for tensile fabric roofing preconstraint 702 S2-8604S translucent white blanco translucido made by approved make multilayer composite material with special densely wooven low wick yarns 1100 dtex PES HT anti capillary treated 'TERSUISSE' standard in the base fabric of weight not less than 750gms/sqm confirming to ENN ISO 2286-2 of standard width 250/267 cm with tensile strength 280/280 da N/Sqcm confirming the EN ISO 1421 standard and tear stength 30/28 daN confirming to DIN 53.363 with Adhesion 10/10 daN/Sqcm confirming to EN ISO 2411 and finished with formula S2 fluorinated varnish weldable with light transmission 13.5 % in NFP 38511 including stretching fixing tying etc complete all as per specified and as directed.

Dismantling polycarbonate sheet of any size any thickness from roof covering at any height complete all as specified and as directed.

S & F 3mm thick, solid embossed pattern polycarbonate sheet, colour as approved by GE as in roof, fixing with self tapping screw and joints of polycarbonate sheet shall be sealed with silicon with and including aluminium strip/ties etc required for fixing all as per manufacturers instructions and as directed.

S & F in repairs for 12 mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face (one side teak) fixed with screws to timber frame all as specified and as directed.

M & L in repairs for second class clean sawn timber framed and fixed hard-wood in scantlings complete all as specified and directed

M & L in repairs for plain fillets second class hardwwod, sectional area exc 13 Sqcm but n.exc 25 Sqcm., square, rectangular or triangular in section, clean sawn, secured with nails plugging to wall complete all as specified and as directed.

M & L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote all as specified and as directed.

M & L for two coats of varnishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler over a coat of sealer on new works complete all as specified and as directed.

M & L for touch wood polishing on surfaces of any description, width or girth cleaning and preparing the surface including necessary repair with wood filler over a coat of sealer where required on old / new work with two coats complete all as specified and as directed.

M & L for grinding of wood to a depth of 2 mm to 3 mm thick by mechanical means and applying two coats of varnish over a coat of sealer and wood filler including preparation of wood surface complete all as specified and as directed.

M & L for preparation of new painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a pink primer coat complete all as specified and as directed.

M & L for preparation of old painted surfaces on steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Description all as per item No 177 above but on steel surfaces complete all as specified and as directed.

M & L for preparation of old painted cement concrete surfaces applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for one coat of aluminium painting (silver colour) on old Gates, mesh etc sufaces including prepration of surfaces over 10 cm width or girth complete all as specified and as directed.

M & L for preparing old surfaces of walls and applying one coat of cement base paint (any shade) as approved complete all as specified and as directed.

M & L for applying one coat of distemper oil emulsion on old decorated surfaces on ceiling including preparation of surface by washing, rubbing down and stopping of distempered surfaces complete all as specified and as directed.

M & L for preparation of old decorated surfaces of ceiling, cornices etc including brooming down or steel wire brushing, scraping down smoke , moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and as directed.

S & F in repair 4 liver lock in UPVC door's as directed by Engineer-in-Charge.

GUNASEKARAN AND CO

K.AYYAPPAN

VVM CONSTRUCTIONS

GMS Builders

ACK ENGINEERING AND CONSTRUCTION

Sree Constructions

JK BUILDERS