ANNUAL MAINTENANCE TO MD JCO/OR ACCN AT QSP ENCLAVE AND ZORAWAR ENCLAVE UNDER AGE B/R-I OF GE (N) MAMUN

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as spd.

All as per Srl Item No 1 but exceeding 1.5 Sqm and n.exc 4 Sqm

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and as directed.

Taking down shutter exc 1 Sqm and n.exc 2 Sqm and refixing in same opening ( including resecuring or easing and other minor repairs ) ccomplete all as specified and as directed.

M&L Box type steel windows and ventilators comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel door frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and applying external surface two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.

All as per item 6 but of size 105x60 mm

S&F 35mm thick glazed and skeleton shutters (Factory made) of 2nd class hard wood, open rebated kiln seasoned & chemically pressure treated and prepared to receive glass/gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), fitted to chowkats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed.

35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed.

S&F for Soild frame (Single rebated) of size 60 mm x 30 mm made out of soild PVC foam with homogenous fine cellular structure havin smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing ( Note:- Door frame shall be water proof, termite proof , elegant and should have excellant screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed.

M&L for 18 to 20 mm thick Perlaminated PVC solid board with acrylic lamination not less than 0.50 mm thick ( one side decorative choice laminaate and other side balancing white ) having weight not less than 9 kg/sqm as in kitchen cabinet,cupboard with suitable 125 mm long fancy handle and pelmet box fixed with screws to PVC/timber frame work complete all as specified and directed.

S&F factory made solid pannel PVC door shutter 30mm thick ( style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in MS frame welded / sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement , supplying & fixing in the frame at site as per specification & drawing compete all as specified and directed.

All as per item No. 12 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading complete all as directed.

M&L Soild PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Sqaure tube , supply and fixing in opening as per specification & drawing complete all as specified and directed.

M&L Soild PVC door frame of size 50mm x 95mm(suitable for moulded door) made out of 5mm wood grain colour PVC sheets & edges will be painted to match printed sheet as reinforced with 19 mm square MS tube and fixing in opening as specifiecation & drawing complete all as specified and as directed.

M&L Repair to Old steel window shutter not exc 1 Sqm including replacement of all UNSV hinges, Handle, and necessary welding to shutter and chowkhat for making window in serviceable condition including two coat of synthetic enamel paint complete all as specified

M&L Repair to Old steel window shutter exc 1 Sqm and n exc 2.00 sqm including replacement of all UNSV hinges, Handle, and necessary welding to shutter and chowkhat for making window in serviceable condition including two coat of synthetic enamel paint complete all as specified

S&F for 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F Hasp and staple aluminium anodized 100mm long including bolt to hinge plate and fixed with screws, etc complete all as specified and directed.

S & F 250mm aluminium sliding door bolt with hasp & staple (bolt type) and fixing clip of sheets cast or extruded section and fixing sliding bolt of extruded section etc complete all as specified and directed.

S & F anodised aluminium barral tower bolt extruded section 200 mm size complete all as direccted.

S & F anodised aluminium handle cast type 125 mm size complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads complete all as specified and directed.

S & F figured glass pin head type 3 mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed compete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller & roller plate complete all as specified directed.

S& F in repair MS helical door spring 150mm size fixed to steel frame as directed.

S & F for Galvanised mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.

S & F in repair for Galvanised mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down complete all as specified and directed.

All as per Srl item No 31 here-in-before, but fixing only

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down complete all as specified and directed.

All as per Srl item No 34 here-in-before, but fixing only

Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as directed.

S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls, complete all as directed.

S&F PVC (SWR) bend any radius 110mm dia bore complete all as directed.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10cm in girth complete all as specified and as directed.

25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.

M&L Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 40mm to 100mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary formwork / supports if required and removing correded reinforcement and binding new reinforcement required as per site condtion and rendering with 5mm thick in CM 1:3 mixed with WPC as per manufacturer instruction and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM (1:4) and finished rough, including dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing removing serviceable tiles to store and rubbish off the premises complete all as spd & directed.

Non-skid ceramic coloured rectified edges tiles 7mm to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4), including demolition of damaged floor of any description and removal of debris out off premises etc complete all as specified and directed

M&L12 to 15mm thick Marble work (table rubbed and polished) in cooking platforms etc set & jointed in neat cement slurry including pointing in marble dust with admixture to match with shade of marble, including making hole for gas pipe including rounding the edges of marble, laid over and including 15mm thick screed bed in CM 1:4 including dismantling of existing tiles etc complete all as specified and directed.

Non-skid ceramic coloured rectified edges tiles 7mm to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on vertical surfaces in skirting etc (to match flooring tiles), set and jointed in neat cement slurry and pointed in coloured epoxy grout to match tiles over and including 10mm thick backing coat in cement mortar (1:3), surfaces finished even and rough to receive tiles, including taking down existing cement mortar and removal of rubbish, out off the premises, etc complete all as specified and directed.

15mm bore chromium plated angular stop cock with wall flange of cast copper alloy, fancy type, with capstan head, screwed both ends for iron pipe, fixed in repair etc complete all as specified and directed. Make : Jaquar Cat part No FLR-5053N or equivalent of Hindware/Marc.

15mm bore bib taps fancy type with wall flange, chromium plated cast copper alloy with capstan heads, screwed for iron pipe or brass ferrule, fixed in repair etc complete all as specified and directed. Make : Jaquar/Hindware/Marc.

15mm bore bib taps fancy type with wall flange, chromium plated cast copper alloy long body with capstan heads, screwed for iron pipe or brass ferrule, fixed in repair etc complete all as specified and directed. Make : Jaquar Cat part No FLR-5047N or equivalent of Hindware/Marc.

S&F for 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated (Make : Jaquar Cat part No FLR-5011N or equivalent model in Hindware/Marc.) , fixed in repair, complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand with waste coupling and 32 mm dia waste pipe complete all as spd and directed.

Single towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat fixed in repair etc complete all as specified and directed. Make : Cat part No AQN-7711 of Jaquar or equivalent of Hindware/Marc.

Stainless steel, Soap dish holder fixed with steel screw on walls, fixed in repair etc complete all as specified and directed. Make : Cat part No AQN-7731 of Jaquar or equivalent of Hindware/Marc.

S&F CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and directed.

PVC flushing cistern 10 Ltr capacity, valve-less syphonic action type, low level, complete with inlet, ball valve, handle, including brackets/pins, PVC flush pipe 32mm bore and PVC connection 15mm bore 450mm long fixed in repair including taking out existing high/low cistern, etc complete all as specified and directed.

Vitreous china white wash down water closet pan (pedestal pattern) (Make : Jaquar Cat part No CNS-WHT-553SN or equivalent of Hindware/Parryware/Somany) with plastic water closet seat , including hand shower (Health foucet) 8mm dia 1m long flex tube in chrome finish and wall hook with NRV (Back flow preventer) and connection to drain (or out going pipe) (Make : Jaquar Cat Part No ALD-577 or equivalent of Hindware/Parryware) and to flush pipe, antisyphonic pipe fixed in repair including dismantling exisiting water closet etc complete all as specified and directed.

Vitreous china White Squatting Orissa Pattern pan (Make : Somany Cat part No 121115 or equivalent of Hindware/Parryware) of size 580x440mm, including cast iron ‘P’ or ‘S’ trap, front or back inlet and integral foot rests and making connection to trap and to flushing pipe, anti syphonic pipe, fixed in repair including dismantling existing squatting pan and making good to disturbed floor, etc complete all as specified and directed.

S&F plastic water closet seat, closed pattern with flat bottom and cover& cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 20mm dia fancy type dropery rod of wooden shade with PVC bracket and PVC funnel over door and window fixed with steel screw and pvc cleat complete all as specified and directed.

Stainless steel sink with draining board 1mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 405mm x 355mm x 178mm, including 32mm bore PVC waste pipe of minimum length 600mm , fixed in repairs including taking down existing unserviceable sink, etc complete all as specified and directed. Make : Blue star Cat part No BSSBSD-52 or equivalent of Nirali/Neelkanth

Disconnecting water tank from Roof Slab/staging of single/double/Triple story bldg, float valve with float arm and outlet pipe from PVC service water tank, empting stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and finally washing the internal surfaces with bleaching powder, closing wash outlet, re fixing water tank, float valve and out let in proper position, replacemt of old pvc top cover with proper hinge type cover as per sample including minor repair if required and testing complete all as specified.

Rotational moulded polyethylene water storage tanks three layer of capacity 500 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete including taking out existing water tanks of any description all as specified & directed.

20mm bore gun metal gate valve, with cast iron wheel head, screwed both ends for GI pipe, fixed in repair, etc complete all as specified and directed.

S&F in repair PVC Lid for water tank of Capacity 500 Ltr complete all as specified.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) padding as levelling course/padding using water proofing compound laid over existing roof , suface finished rough to recieve cement mortar including necessary formwork including demolitionof existing concrete of any description and removal of debris out off the premises complete all as specified and as directed. Note ;- (WPC shall be measured and paid seperately).

M&L for cement concrete (12:4) type -B1( using 20 mm graded crushed stopne aggregate) such as benching, coping, bed blocks,etc rounded chamffered on edges including necessary formwork including demolition of existing concrete of any description and removal of debris out off the premises etc complete all as specified and as directed

M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement including raking out joingts, hacking for key, scrubbing down with water etc complete all as specified and directed.

APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification including taking down of existing tarfelt and cement mortar of any descriptiion etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3 mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) using liquid water proofing compound in finishing layer on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement including taking down cement or cement lime plaster of any description and raking out joints, hacking for key, scrubbing down with water and removal of rubbish, out off the premises, etc complete all as specified & directed. (Note : WPC shall be measured and paid separately)

Rendering 10mm thick on brick work or concrete surface in CM (1:6) on wall surfaces finished even and smooth using extra cement including taking down cement or cement lime plaster of any description and raking out joints, hacking for key, scrubbing down with water and removal of rubbish, out off the premises, etc complete all as specified & directed.

Rendering 5mm thick cement plaster on surfaces of concrete ceiling in cement mortar 1:3, surface finished even and smooth using extra cement including taking down cement or cement lime plaster of any description and removal of rubbish out off the premises, etc complete all as specified & directed.

M&L preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed.

M&L preparation of new plastered surface of external wall surface applying two coat of cement base paint including curing complete over a of alkali-resistant priming paint complete all as specified & directed.

M&L three coats of white wash on newly plastered surface of walls including preparation of surfaces complete all as specified and directed.

M&L three coats of white wash on newly plastered surface of ceiling including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying two coats of distemper oil emulsion, white or tinted, over and including 2 mm thick wall care putty/water proofing putty any nos of coat to receive true smooth surface complete all as specified & directed.

Preparation of old plastered surfaces by scrapping down smoke roots, moulds salts and treading oil and greasy spots with wire brush and applying one coat of white wash on wall complete all as specified & directed.

Preparation of old plastered surfaces by scrapping down smoke roots, moulds salts and treading oil and greasy spots with wire brush and applying one coat of white wash on Ceiling complete all as specified & directed.

Preparation of old plastered surfaces by scrapping down smoke roots, molds salts and treading oil and greasy spots with wire brush including removing all nails & washing with clean water down and applying one coat of oil bound Distemper on wall , white or tinted complete all as specified & directed.

M&L prepration of old steel surfaces of any description, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified.

M&L prepration of old wooden surfaces of any description, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified.

Brick work with Fly Ash Brick (Non-Modular) straight or curved on plan exceeding 6m mean radius built in CM (1:6) including dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removal of rubbish out off the premises, etc complete all as specified and directed.

Labour only (except bricks) for brick work (with serviceable bricks retrieved from dismantling under item Nos 83 & 84) straight or curved on plan exceeding 6m mean radius built in CM (1:6) including dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removal of rubbish out off the premises, etc complete all as specified and directed.

75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection laid in panels and joints filled with mix of bitumen and sand (1:3) by weight, finished the surface even and smooth using extra cement including demolition of damaged plinth protection and removal of debris out off the premises etc complete all as specified and directed.

S&F 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm dia CI bends(any radius) diminishing pieces or tapers (large bore measured) with ovel asses door complete all as specified and directed.

S&F 75 mm dia CI bends(any radius) diminishing pieces or tapers (large bore measured) with ovel asses door complete all as specified and directed.

S&F Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed in repairs complete all as specified & directed.

S&F Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, fixed in repairs complete all as specified & directed.

S&F 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified.

S&F in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified.

S&F 50 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified.

S&F in 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified.

S&F cast iron cowl for 50 mm dia all as directed.

M&L for Removing all vegitation bushes / smalll tree growth n exc 15cm girth from the RCC Roof slab/water tank platform/Chajja by cutting the surrounding area(n exc0.500 sqm) up to a depth of 25mm and , making the disturbed suface good by PCC 1: 2:4 type B-0, (using 12.5mm graded aggregate) with and including WPC as per amunfacturer instructions and applying one coat of waterproofing solution (Dr Fixit Prime seal Acrylic coating /equivalent) top of the disturbed area complete all as specified and directed

Material and labour for Providing and injecting chemical emulsion for post constructional anti-termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litre per linear meter including drilling and plugging of holes etc in apron/plinth protection complete all as specified in IS-Code 6313 Part (3) : 2001 and as directed. Note:- Chlorphyriphos 20% EC or Lindane 20% EC-ISI marked shall be used.

Material and Labour for Providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using chemical emulsion @ one litre per hole 300 mm apart along the junction of floor and wall, along joints in floors including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floor complete all as specified in IS code-6313 Part (3) : 2001 and as directed .Note:- Chlorphyriphos 20% EC or Lindane 20% EC-ISI marked shall be used.

M&L10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed.

M&L for bitumen blown any grade, applied hot, two coats, to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.

Supply only liquid water proofing compound Make : Dr. Fixit or STP

M&L for 25 mm thick P. C.C type B-1, 1:2:4 ( using 20mm graded aggregate) as in sub floors for laying floor finish complete all as specified and directed.

M&L Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floors and all as specified and directed.

M&L for kitchen slab/shelves supported on wall/beams using reinforced cement concrete type B1(1:2:4) using 20 mm aggregate including necessary formwork and demolitionof existing slab/shelves complete all as specified and as directed.

M&L Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips compete all as specified and as directed.

Deduct Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs 54,477.50 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum)

RD Engineers

WALIA ENTERPRISES

M/S CANTILEVER ENGINEERS

kewal builders

M/S NARESH KUMAR SHARMA